* Jean-Louis Martineau <[email protected]> [20090708 08:42]: > Jean-Francois Malouin wrote: >> Just upgraded a server from 2.6.0p2 to 2.6.1p1 and now amcheck outputs: >> >> >> Server check took 0.004 seconds >> amcheck-clients: amanda/tcp unknown protocol >> > This message is misleading when configured with '--with-testing'. > amanda use the 'amanda-av48-2/tcp' service, you must add it to > /etc/services.
It's there: remember it used to work with 2.6.0 with the same configuration. > > --with-testing will be remove from the next release, it will be possible > to set the service name in the dumptype. As I replied to Dustin, make sure to document that in the Changelog. thank you, jf > > Jean-Louis > >> Amanda Backup Client Hosts Check >> -------------------------------- >> >> (brought to you by Amanda 2.6.1p1) >> >> The server is configured and compiled with >> >> ./configure \ >> --prefix=/opt/amanda \ >> --with-testing=av48-2 \ >> --with-tmpdir=/var/tmp/amanda \ >> --with-amperldir=/opt/amanda/perl \ >> --with-config=top \ >> --with-user=amanda \ >> --with-group=disk \ >> --with-bsdtcp-security \ >> --with-amandahosts \ >> --with-tape-device=/dev/nst0 \ >> --with-changer-device=/dev/changer \ >> --with-tape-server=wart \ >> --with-index-server=wart >> >> I did a test by removing the `--with-testing' option and it works so >> has something changed in the config >> step? >> >> thanks, >> jf >> -- <° >< Jean-François Malouin McConnell Brain Imaging Centre Systems/Network Administrator Montréal Neurological Institute 3801 Rue University, Suite WB219, Montréal, Québec, H3A 2B4, Canada
