Jon LaBadie wrote:
> On Fri, Mar 05, 2010 at 02:57:01PM -0500, rory_f wrote:
> 
> > 
> > Hey guys. Thanks
> > 
> > I checked my library GUI and for the tape run i was just talking about, 
> > where it was stopping around 230gb, it seems compression WAS on. I turned 
> > it off via mt and now the gui says "off" (after stopping the run obviously)
> > 
> > I was *sure* i turned it off with mt before.  Im doing another amtapetype 
> > now.
> > 
> > And the comment regarding labeling: thanks. I'll most certainly relabel all 
> > the tapes after this tapetype is done.
> > 
> > Thanks again guys.
> > 
> > 
> 
> Recalling your data in the original posting I think an amtapetype run was 
> estimated
> to take about 8 hours.  I think LTO drives are capable of writing a full tape 
> in
> about 1.5 hrs, amtapetype should do two full writes, thus about 3+ hours 
> total.
> 
> As you system seems to be writing at less than 1/2 full speed, I wonder if it
> is failing to stream.  If an LTO drive is not streaming, is its capacity 
> affected
> by having large gaps caused by the start and stopping action?
> 
> jl
> -- 
> Jon H. LaBadie                  jon < at > jgcomp.com
> JG Computing
> 12027 Creekbend Drive         (703) 787-0884
> Reston, VA  20194             (703) 787-0922 (fax)


ok, so here is the latest one.

[ama...@backup tor]$ amtapetype -o -f /dev/nst0 -e 400G
Writing 1024 Mbyte   compresseable data:  32 sec
Writing 1024 Mbyte uncompresseable data: 32 sec
Estimated time to write 2 * 409600 Mbyte: 25600 sec = 7 h 6 min
wrote 6815744 32 Kb blocks in 52 files in 5733 seconds (No space left on device)
wrote 6815744 32 Kb blocks in 104 files in 5959 seconds (No space left on 
device)
define tapetype unknown-tapetype {
    comment "just produced by tapetype prog (hardware compression off)"
    length 212992 mbytes
    filemark 0 kbytes
    speed 37322 kps
}

compression was set OFF in the gui for the library interfacing with the drive.

so, it seems, unless these tapes i have here are all pooched, the drive is 
giving me problems. ugh.

i'd try it on  our other drive but ... that's out being replaced ;-). maybe 
it's time to get this replaced too, while i still have the maintenance contract.

thanks for the help.. any further input on this is greatly appreciated!

+----------------------------------------------------------------------
|This was sent by [email protected] via Backup Central.
|Forward SPAM to [email protected].
+----------------------------------------------------------------------


Reply via email to