I'm puzzled here. I have 3 installations in different departments using
identical tape libraries -- Sony LIB162A5BB (AIT5). The longest running
2 run just like clockwork. They go through 5 tapes a week, and I haven't
had any problems over a period of nearly 3 years on one and a year and a
half on the other. However, the 3rd one is giving me headaches.
The 3rd one is in a department that hasn't been able to afford many
tapes (it took me a few years pushing before they managed to come up
with the money for the library), so I run one tape a week. The cronjob
for the week days is
45 0 * * 1-6 /usr/local/sbin/amdump daily -o reserve=100 -o tapedev=""
-o tpchanger=""
And then on weekends, I run just
45 20 * * 6 /usr/local/sbin/amdump daily
whereupon it finds the library, finds the tape, flushes everything off
the holding disk and proceeds to catch up on the full backups.
Anyway, for some time now, when it cycled around to tape 3, it would
skip over it and go to tape 4. Recently, I got some new tapes and set
them up at the end of the cycle. So, now I have:
eclogite:/usr/local/etc/amanda/daily$ more tapelist
20100423091304 geo-daily-02 reuse
20100417204500 geo-daily-01 reuse
20100410204501 geo-daily-07 reuse
20100403204500 geo-daily-06 reuse
20100327204501 geo-daily-05 reuse
20100320204500 geo-daily-04 reuse
0 geo-daily-08 reuse
0 geo-daily-11 reuse
0 geo-daily-10 reuse
0 geo-daily-09 reuse
0 geo-daily-03 reuse
When I labeled those, I left the library at slot 8 using `amtape daily
slot 8`. But, that weekend, Amanda skipped through and did the backups
to tape 1.
Today, I did
$ amrmtape daily geo-daily-08
$ amtape daily slot 8
$ /usr/local/sbin/mtx -f /dev/scsi/changer/c2t0d0 status
$ mt -f /dev/rmt/1n status
$ mt -f /dev/rmt/1n erase
$ mt -f /dev/rmt/1n status
$ amlabel daily geo-daily-08
following that, I used dd to read the label off this tape and also off
geo-daily-06 which had been used successfully a couple of weekends ago.
I could see no difference other than 06 vs. 08 and the date stamp that
06 had been used. I also did an amrecover off geo-daily-06 to confirm
that it was working and that I could recover files from it.
Then, with the tape library positioned at slot 8 (using amtape to
position it), I issued an `amflush daily`.
It launched off. However, after looking at the tape in slot 8 and seeing
the label, it then went directly to tape geo-daily-02 in slot 2, not
even bothering to cycle through the tape library to see that there were
other new tapes in line.
I don't get it. Why is Amanda refusing to use the new tapes (or tape 3)?
Since I have seen some scsi errors on this system, I've been tailing
/var/adm/messages piped through `grep 'scsi'` during this entire
process, and I have not seen any scsi errors.
I've looked through all the debug files. Nothing indicates any error or
any reason why it didn't like geo-daily-08. I've put all that stuff below.
--
---------------
Chris Hoogendyk
-
O__ ---- Systems Administrator
c/ /'_ --- Biology & Geology Departments
(*) \(*) -- 140 Morrill Science Center
~~~~~~~~~~ - University of Massachusetts, Amherst
<[email protected]>
---------------
Erd?s 4
Amanda version 2.5.1p3
The debug files are listed in timestamp order and show the sequence of how
things were done. I listed every debug file that had a timestamp during the
period I was setting up and then initiating the amflush:
eclogite:/tmp/amanda/server$ more chg-zd-mtx.2010042309*
::::::::::::::
chg-zd-mtx.20100423090721.debug
::::::::::::::
chg-zd-mtx: debug 1 pid 18733 ruid 555 euid 555: start at Fri Apr 23
09:07:21 2010
09:07:21 Using config file /usr/local/etc/amanda/daily/changer.conf
09:07:22 Arg info:
$# = 2
$0 = "/usr/local/libexec/chg-zd-mtx"
$1 = "-slot"
$2 = "current"
09:07:22 Running: /usr/local/sbin/mtx status
09:07:22 Exit code: 0
Stdout:
Storage Changer /dev/scsi/changer/c2t0d0:1 Drives, 16 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Storage Element 8 Loaded):VolumeTag = A0GRYG
Storage Element 1:Full :VolumeTag=A0GRYA
Storage Element 2:Full :VolumeTag=A0GRY9
Storage Element 3:Full :VolumeTag=A0GRYB
Storage Element 4:Full :VolumeTag=A0GRYC
Storage Element 5:Full :VolumeTag=A0GRYD
Storage Element 6:Full :VolumeTag=A0GRYE
Storage Element 7:Full :VolumeTag=A0GRYF
Storage Element 8:Empty
Storage Element 9:Full :VolumeTag=A0GRYH
Storage Element 10:Full :VolumeTag=A0GRYJ
Storage Element 11:Full :VolumeTag=A0GRYK
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Full
09:07:22 Config info:
firstslot = "1"
lastslot = "15"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "0"
unloadpause = "0"
autoclean = "0"
autocleancount = "99999"
havereader = "1"
driveslot = "0"
poll_drive_ready = "3"
initial_poll_delay = "0"
max_drive_wait = "120"
09:07:23 LOADSLOT -> load drive 0 (/dev/rmt/1n) from slot current
09:07:23 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:07:23 Exit (0) -> 8 /dev/rmt/1n
chg-zd-mtx: pid 18874 finish time Fri Apr 23 09:07:23 2010
::::::::::::::
chg-zd-mtx.20100423090855.debug
::::::::::::::
chg-zd-mtx: debug 1 pid 18932 ruid 555 euid 555: start at Fri Apr 23
09:08:55 2010
09:08:56 Using config file /usr/local/etc/amanda/daily/changer.conf
09:08:56 Arg info:
$# = 1
$0 = "/usr/local/libexec/chg-zd-mtx"
$1 = "-info"
09:08:56 Running: /usr/local/sbin/mtx status
09:08:56 Exit code: 0
Stdout:
Storage Changer /dev/scsi/changer/c2t0d0:1 Drives, 16 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Storage Element 8 Loaded):VolumeTag = A0GRYG
Storage Element 1:Full :VolumeTag=A0GRYA
Storage Element 2:Full :VolumeTag=A0GRY9
Storage Element 3:Full :VolumeTag=A0GRYB
Storage Element 4:Full :VolumeTag=A0GRYC
Storage Element 5:Full :VolumeTag=A0GRYD
Storage Element 6:Full :VolumeTag=A0GRYE
Storage Element 7:Full :VolumeTag=A0GRYF
Storage Element 8:Empty
Storage Element 9:Full :VolumeTag=A0GRYH
Storage Element 10:Full :VolumeTag=A0GRYJ
Storage Element 11:Full :VolumeTag=A0GRYK
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Full
09:08:56 Config info:
firstslot = "1"
lastslot = "15"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "0"
unloadpause = "0"
autoclean = "0"
autocleancount = "99999"
havereader = "1"
driveslot = "0"
poll_drive_ready = "3"
initial_poll_delay = "0"
max_drive_wait = "120"
09:08:57 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:08:57 INFO -> first slot: 1
-> current slot: 8
-> loaded slot: 8
-> last slot: 15
-> slot list: 1 2 3 4 5 6 7 8 9 10 11
-> can go backwards: 1
-> havereader: 1
09:08:57 Exit (0) -> 8 15 1 1
chg-zd-mtx: pid 19071 finish time Fri Apr 23 09:08:57 2010
::::::::::::::
chg-zd-mtx.20100423090857.debug
::::::::::::::
chg-zd-mtx: debug 1 pid 19083 ruid 555 euid 555: start at Fri Apr 23
09:08:57 2010
09:08:58 Using config file /usr/local/etc/amanda/daily/changer.conf
09:08:58 Arg info:
$# = 2
$0 = "/usr/local/libexec/chg-zd-mtx"
$1 = "-label"
$2 = "geo-daily-08"
09:08:58 Running: /usr/local/sbin/mtx status
09:08:58 Exit code: 0
Stdout:
Storage Changer /dev/scsi/changer/c2t0d0:1 Drives, 16 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Storage Element 8 Loaded):VolumeTag = A0GRYG
Storage Element 1:Full :VolumeTag=A0GRYA
Storage Element 2:Full :VolumeTag=A0GRY9
Storage Element 3:Full :VolumeTag=A0GRYB
Storage Element 4:Full :VolumeTag=A0GRYC
Storage Element 5:Full :VolumeTag=A0GRYD
Storage Element 6:Full :VolumeTag=A0GRYE
Storage Element 7:Full :VolumeTag=A0GRYF
Storage Element 8:Empty
Storage Element 9:Full :VolumeTag=A0GRYH
Storage Element 10:Full :VolumeTag=A0GRYJ
Storage Element 11:Full :VolumeTag=A0GRYK
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Full
09:08:59 Config info:
firstslot = "1"
lastslot = "15"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "0"
unloadpause = "0"
autoclean = "0"
autocleancount = "99999"
havereader = "1"
driveslot = "0"
poll_drive_ready = "3"
initial_poll_delay = "0"
max_drive_wait = "120"
09:08:59 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:08:59 LABEL -> Adding label "geo-daily-08" with barcode "A0GRYG" for
slot 8 into /usr/local/etc/amanda/daily/changer-barcodes
-> already synced
09:09:00 Exit (0) -> 8 /dev/rmt/1n
chg-zd-mtx: pid 19232 finish time Fri Apr 23 09:09:00 2010
::::::::::::::
chg-zd-mtx.20100423091310.debug
::::::::::::::
chg-zd-mtx: debug 1 pid 19424 ruid 555 euid 555: start at Fri Apr 23
09:13:10 2010
09:13:11 Using config file /usr/local/etc/amanda/daily/changer.conf
09:13:11 Arg info:
$# = 1
$0 = "/usr/local/libexec/chg-zd-mtx"
$1 = "-info"
09:13:11 Running: /usr/local/sbin/mtx status
09:13:11 Exit code: 0
Stdout:
Storage Changer /dev/scsi/changer/c2t0d0:1 Drives, 16 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Storage Element 8 Loaded):VolumeTag = A0GRYG
Storage Element 1:Full :VolumeTag=A0GRYA
Storage Element 2:Full :VolumeTag=A0GRY9
Storage Element 3:Full :VolumeTag=A0GRYB
Storage Element 4:Full :VolumeTag=A0GRYC
Storage Element 5:Full :VolumeTag=A0GRYD
Storage Element 6:Full :VolumeTag=A0GRYE
Storage Element 7:Full :VolumeTag=A0GRYF
Storage Element 8:Empty
Storage Element 9:Full :VolumeTag=A0GRYH
Storage Element 10:Full :VolumeTag=A0GRYJ
Storage Element 11:Full :VolumeTag=A0GRYK
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Full
09:13:11 Config info:
firstslot = "1"
lastslot = "15"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "0"
unloadpause = "0"
autoclean = "0"
autocleancount = "99999"
havereader = "1"
driveslot = "0"
poll_drive_ready = "3"
initial_poll_delay = "0"
max_drive_wait = "120"
09:13:12 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:13:12 INFO -> first slot: 1
-> current slot: 8
-> loaded slot: 8
-> last slot: 15
-> slot list: 1 2 3 4 5 6 7 8 9 10 11
-> can go backwards: 1
-> havereader: 1
09:13:12 Exit (0) -> 8 15 1 1
chg-zd-mtx: pid 19564 finish time Fri Apr 23 09:13:12 2010
::::::::::::::
chg-zd-mtx.20100423091312.debug
::::::::::::::
chg-zd-mtx: debug 1 pid 19576 ruid 555 euid 555: start at Fri Apr 23
09:13:12 2010
09:13:13 Using config file /usr/local/etc/amanda/daily/changer.conf
09:13:13 Arg info:
$# = 2
$0 = "/usr/local/libexec/chg-zd-mtx"
$1 = "-search"
$2 = "geo-daily-02"
09:13:13 Running: /usr/local/sbin/mtx status
09:13:13 Exit code: 0
Stdout:
Storage Changer /dev/scsi/changer/c2t0d0:1 Drives, 16 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Storage Element 8 Loaded):VolumeTag = A0GRYG
Storage Element 1:Full :VolumeTag=A0GRYA
Storage Element 2:Full :VolumeTag=A0GRY9
Storage Element 3:Full :VolumeTag=A0GRYB
Storage Element 4:Full :VolumeTag=A0GRYC
Storage Element 5:Full :VolumeTag=A0GRYD
Storage Element 6:Full :VolumeTag=A0GRYE
Storage Element 7:Full :VolumeTag=A0GRYF
Storage Element 8:Empty
Storage Element 9:Full :VolumeTag=A0GRYH
Storage Element 10:Full :VolumeTag=A0GRYJ
Storage Element 11:Full :VolumeTag=A0GRYK
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Full
09:13:13 Config info:
firstslot = "1"
lastslot = "15"
cleanslot = "-1"
cleancycle = "120"
offline_before_unload = "0"
unloadpause = "0"
autoclean = "0"
autocleancount = "99999"
havereader = "1"
driveslot = "0"
poll_drive_ready = "3"
initial_poll_delay = "0"
max_drive_wait = "120"
09:13:14 SEARCH -> Hunting for label "geo-daily-02"
-> barcode is "A0GRY9"
-> foundslot is 2
09:13:14 LOADSLOT -> load drive 0 (/dev/rmt/1n) from slot 2
09:13:14 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:13:14 EJECT -> ejecting tape from /dev/rmt/1n
09:13:14 STATUS -> currently loaded slot = 8
-> currently loaded barcode = "A0GRYG"
09:13:14 EJECT -> moving tape from drive 0 to storage slot 8
09:13:14 Running: /usr/local/sbin/mtx unload 8 0
09:13:56 Exit code: 0
Stdout:
Unloading drive 0 into Storage Element 8...done
09:13:56 -> status 0, result "Unloading drive 0 into Storage
Element 8...done"
09:13:56 Return (0) -> 8 /dev/rmt/1n
09:13:56 LOADSLOT -> loading tape from slot 2 to drive 0 (/dev/rmt/1n)
09:13:56 Running: /usr/local/sbin/mtx load 2 0
09:14:13 Exit code: 0
Stdout:
Loading media from Storage Element 2 into drive 0...done
09:14:14 -> status 0, result "Loading media from Storage Element 2
into drive 0...done"
09:14:14 Running: /usr/bin/mt -f /dev/rmt/1n rewind
09:14:34 Exit code: 0
09:14:34 Exit (0) -> 2 /dev/rmt/1n
chg-zd-mtx: pid 19840 finish time Fri Apr 23 09:14:34 2010
eclogite:/tmp/amanda/server$ cd daily
eclogite:/tmp/amanda/server/daily$ ls -l *2010042309* | sort -t . +1
-rw-r----- 1 amandabackup amandabackup 2376 Apr 23 09:09
amlabel.20100423090720.debug
-rw-r----- 1 amandabackup amandabackup 161 Apr 23 09:11
amflush.20100423091138.debug
-rw-r----- 1 amandabackup amandabackup 161 Apr 23 09:13
amflush.20100423091304.debug
-rw-r----- 1 amandabackup amandabackup 159 Apr 23 09:13
driver.20100423091309.debug
-rw-r----- 1 amandabackup amandabackup 26675 Apr 23 11:48
taper.20100423091309.debug
eclogite:/tmp/amanda/server/daily$ more amlabel.20100423090720.debug
amlabel: debug 1 pid 18721 ruid 555 euid 555: start at Fri Apr 23 09:07:20
2010
amlabel: debug 1 pid 18721 ruid 555 euid 555: rename at Fri Apr 23 09:07:20
2010
amlabel: Building type 2 (TAPESTART) header of size 32768 using:
amlabel: Contents of *(dumpfile_t *)ffbfea08:
amlabel: type = 2 (TAPESTART)
amlabel: datestamp = 'X'
amlabel: dumplevel = 0
amlabel: compressed = 0
amlabel: encrypted = 0
amlabel: comp_suffix = ''
amlabel: encrypt_suffix = ''
amlabel: name = 'geo-daily-08'
amlabel: disk = ''
amlabel: program = ''
amlabel: srvcompprog = ''
amlabel: clntcompprog = ''
amlabel: srv_encrypt = ''
amlabel: clnt_encrypt = ''
amlabel: recover_cmd = ''
amlabel: uncompress_cmd = ''
amlabel: encrypt_cmd = ''
amlabel: decrypt_cmd = ''
amlabel: srv_decrypt_opt = ''
amlabel: clnt_decrypt_opt = ''
amlabel: cont_filename = ''
amlabel: is_partial = 0
amlabel: partnum = 0
amlabel: totalparts = 0
amlabel: blocksize = 32768
amlabel: Building type 3 (TAPEEND) header of size 32768 using:
amlabel: Contents of *(dumpfile_t *)ffbfea08:
amlabel: type = 3 (TAPEEND)
amlabel: datestamp = 'X'
amlabel: dumplevel = 0
amlabel: compressed = 0
amlabel: encrypted = 0
amlabel: comp_suffix = ''
amlabel: encrypt_suffix = ''
amlabel: name = ''
amlabel: disk = ''
amlabel: program = ''
amlabel: srvcompprog = ''
amlabel: clntcompprog = ''
amlabel: srv_encrypt = ''
amlabel: clnt_encrypt = ''
amlabel: recover_cmd = ''
amlabel: uncompress_cmd = ''
amlabel: encrypt_cmd = ''
amlabel: decrypt_cmd = ''
amlabel: srv_decrypt_opt = ''
amlabel: clnt_decrypt_opt = ''
amlabel: cont_filename = ''
amlabel: is_partial = 0
amlabel: partnum = 0
amlabel: totalparts = 0
amlabel: blocksize = 32768
changer_label: geo-daily-08 for slot 8
changer_query: changer return was 15 1 1
changer_query: searchable = 1
changer_label: calling changer -label geo-daily-08
amlabel: pid 18721 finish time Fri Apr 23 09:09:00 2010
eclogite:/tmp/amanda/server/daily$ more amflush.20100423091304.debug
amflush: debug 1 pid 19407 ruid 555 euid 555: start at Fri Apr 23 09:13:04
2010
amflush: debug 1 pid 19407 ruid 555 euid 555: rename at Fri Apr 23 09:13:04
2010
eclogite:/tmp/amanda/server/daily$ more driver.20100423091309.debug
driver: debug 1 pid 19411 ruid 555 euid 555: start at Fri Apr 23 09:13:09
2010
driver: debug 1 pid 19411 ruid 555 euid 555: rename at Fri Apr 23 09:13:09
2010
eclogite:/tmp/amanda/server/daily$ more taper.20100423091309.debug
taper: debug 1 pid 19412 ruid 555 euid 555: start at Fri Apr 23 09:13:09
2010
taper: pid 19412 executable taper version 2.5.1p3
taper: debug 1 pid 19412 ruid 555 euid 555: rename at Fri Apr 23 09:13:09
2010
taper: page size = 8192
taper: buffer size is 32768
taper: buffer[00] at fee00000
taper: buffer[01] at fee08000
taper: buffer[02] at fee10000
taper: buffer[03] at fee18000
taper: buffer[04] at fee20000
taper: buffer[05] at fee28000
taper: buffer[06] at fee30000
taper: buffer[07] at fee38000
taper: buffer[08] at fee40000
taper: buffer[09] at fee48000
taper: buffer[10] at fee50000
taper: buffer[11] at fee58000
taper: buffer[12] at fee60000
taper: buffer[13] at fee68000
taper: buffer[14] at fee70000
taper: buffer[15] at fee78000
taper: buffer[16] at fee80000
taper: buffer[17] at fee88000
taper: buffer[18] at fee90000
taper: buffer[19] at fee98000
taper: buffer structures at feea0000 for 240 bytes
changer_query: changer return was 15 1 1
changer_query: searchable = 1
changer_find: looking for geo-daily-02 changer is searchable = 1
changer_search: geo-daily-02
taper: Building type 2 (TAPESTART) header of size 32768 using:
taper: Contents of *(dumpfile_t *)ffbfda50:
taper: type = 2 (TAPESTART)
taper: datestamp = '20100423091304'
taper: dumplevel = 0
taper: compressed = 0
taper: encrypted = 0
taper: comp_suffix = ''
taper: encrypt_suffix = ''
taper: name = 'geo-daily-02'
taper: disk = ''
taper: program = ''
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ''
taper: uncompress_cmd = ''
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
taper: Building type 4 (FILE) header of size 32768 using:
taper: Contents of *(dumpfile_t *)332dc:
taper: type = 4 (FILE)
taper: datestamp = '20100410004501'
taper: dumplevel = 1
taper: compressed = -32
taper: encrypted = 0
taper: comp_suffix = '.gz'
taper: encrypt_suffix = ''
taper: name = 'gis.geo.umass.edu'
taper: disk = '/u1/home/students'
taper: program = '/usr/local/etc/amanda/tools/ufsdump'
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ' /usr/sbin/ufsrestore -f - ...'
taper: uncompress_cmd = ' /usr/bin/gzip -dc |'
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
taper: Building type 4 (FILE) header of size 32768 using:
taper: Contents of *(dumpfile_t *)332dc:
taper: type = 4 (FILE)
taper: datestamp = '20100410004501'
taper: dumplevel = 1
taper: compressed = -32
taper: encrypted = 0
taper: comp_suffix = '.gz'
taper: encrypt_suffix = ''
taper: name = 'eclogite.geo.umass.edu'
taper: disk = '/export/geoff/archive'
taper: program = '/usr/local/etc/amanda/tools/ufsdump'
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ' /usr/sbin/ufsrestore -f - ...'
taper: uncompress_cmd = ' /usr/bin/gzip -dc |'
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
taper: Building type 4 (FILE) header of size 32768 using:
taper: Contents of *(dumpfile_t *)332dc:
taper: type = 4 (FILE)
taper: datestamp = '20100410004501'
taper: dumplevel = 1
taper: compressed = -32
taper: encrypted = 0
taper: comp_suffix = '.gz'
taper: encrypt_suffix = ''
taper: name = 'eclogite.geo.umass.edu'
taper: disk = '/u1/home/grad'
taper: program = '/usr/local/etc/amanda/tools/ufsdump'
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ' /usr/sbin/ufsrestore -f - ...'
taper: uncompress_cmd = ' /usr/bin/gzip -dc |'
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
taper: Building type 4 (FILE) header of size 32768 using:
taper: Contents of *(dumpfile_t *)332dc:
taper: type = 4 (FILE)
taper: datestamp = '20100410204501'
taper: dumplevel = 0
taper: compressed = -32
taper: encrypted = 0
taper: comp_suffix = '.gz'
taper: encrypt_suffix = ''
taper: name = 'eclogite.geo.umass.edu'
taper: disk = '/var/adm/archive'
taper: program = '/usr/local/etc/amanda/tools/ufsdump'
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ' /usr/sbin/ufsrestore -f - ...'
taper: uncompress_cmd = ' /usr/bin/gzip -dc |'
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
taper: Building type 4 (FILE) header of size 32768 using:
taper: Contents of *(dumpfile_t *)332dc:
taper: type = 4 (FILE)
taper: datestamp = '20100410204501'
taper: dumplevel = 0
taper: compressed = -32
taper: encrypted = 0
taper: comp_suffix = '.gz'
taper: encrypt_suffix = ''
taper: name = 'gis.geo.umass.edu'
taper: disk = '/export/hampshire'
taper: program = '/usr/local/etc/amanda/tools/ufsdump'
taper: srvcompprog = ''
taper: clntcompprog = ''
taper: srv_encrypt = ''
taper: clnt_encrypt = ''
taper: recover_cmd = ' /usr/sbin/ufsrestore -f - ...'
taper: uncompress_cmd = ' /usr/bin/gzip -dc |'
taper: encrypt_cmd = ''
taper: decrypt_cmd = ''
taper: srv_decrypt_opt = ''
taper: clnt_decrypt_opt = ''
taper: cont_filename = ''
taper: is_partial = 0
taper: partnum = 0
taper: totalparts = 0
taper: blocksize = 32768
etc.
