Greetings, I'm trying to recover using Amanda-3.1.1 from tapes created by amanda-2.6p2:
-- eharia...@bkpsvr:/data$ sudo /usr/local/amanda/sbin/amrecover raw-monthly AMRECOVER Version 3.1.1. Contacting server on bkpsvr ... 220 bkpsvr AMANDA index server (3.1.1) ready. Setting restore date to today (2010-08-06) 200 Working date set to 2010-08-06. 200 Config set to raw-monthly. 200 Dump host set to bkpsvr. Use the setdisk command to choose dump disk to recover amrecover> setdisk /mnt/expl-bkp 200 Disk set to /mnt/expl-bkp. amrecover> cd raw /mnt/expl-bkp/raw-data amrecover> cd seis /mnt/expl-bkp/raw-data/seis amrecover> cd 3D-SEIS /mnt/expl-bkp/raw-data/seismic/3D-SEIS amrecover> add repro Added dir /raw-data/seismic/3D-SEIS/repro/ at date 2009-11-10-07-57-04 amrecover> extract Extracting files using tape drive tape:/dev/st0 on host bkpsvr. The following tapes are needed: raw-monthly-2 raw-monthly-3 raw-monthly-4 raw-monthly-5 raw-monthly-6 raw-monthly-7 raw-monthly-8 Extracting files using tape drive tape:/dev/st0 on host bkpsvr. Load tape raw-monthly-2 now Continue [?/Y/n/s/d]? -- I hit <enter> and after waiting for 1 hour it comes up with: "Got no header and data from server, check in amidxtaped.*.debug and amandad.*.debug files on server amrecover>". tail amidxtaped.20100806175923.debug gives me: -- 692,1693,1694,1695,1696,1697,1698,1699,1700,1701,1702,1703,1704,1705,1706,1707,1708,1709,1710,1711,1712,1713,1714,1715,1716,1717,1718,1719,1720,1721,1722,1723,1724,1725,1726,1727,1728 Fri Aug 6 17:59:23 2010: amidxtaped: CTL << FSF=1 Fri Aug 6 17:59:23 2010: amidxtaped: CTL << HEADER Fri Aug 6 17:59:23 2010: amidxtaped: CTL << DEVICE=tape:/dev/st0 Fri Aug 6 17:59:23 2010: amidxtaped: CTL << HOST=^bkpsvr$ Fri Aug 6 17:59:23 2010: amidxtaped: CTL << DISK=^/mnt/expl-bkp$ Fri Aug 6 17:59:23 2010: amidxtaped: CTL << DATESTAMP=20091110075704 Fri Aug 6 17:59:23 2010: amidxtaped: CTL << END Fri Aug 6 17:59:23 2010: amidxtaped: pid 3248 ruid 1001 euid 1001 version 3.1.1: rename at Fri Aug 6 17:59:23 2010 -- tail amandad.debug gives me: -- Fri Aug 6 17:59:23 2010: amandad: opening security stream for fd 50 Fri Aug 6 17:59:23 2010: amandad: opening security stream for fd 51 Fri Aug 6 17:59:23 2010: amandad: security_close(handle=0x8fdbb08, driver=0xb77bed60 (LOCAL)) Fri Aug 6 17:59:23 2010: amandad: security_stream_close(0x8ffc2e0) Fri Aug 6 18:34:12 2010: amandad: security_stream_close(0x8ff42a8) Fri Aug 6 18:34:12 2010: amandad: tcpm_send_token: data is still flowing Fri Aug 6 19:06:00 2010: amandad: security_stream_close(0x90143e0) Fri Aug 6 19:06:00 2010: amandad: tcpm_send_token: data is still flowing Fri Aug 6 19:06:00 2010: amandad: security_stream_close(0x901c418) -- In the past I have ever successfully recover with the same tapes and config using 2.6p2. Amanda running on Ubuntu 10.04 and using 'local' auth. How can I resolve this? -eko-
