Correct. It should be put in the disklist.conf file for each DLE. Paul
On Tue, 2010-10-26 at 23:31 -0400, Robert Reilly wrote: > and how to i accomplish with amanda enterprise ?, it is for the dump > type correct ? > > Thanks, > Robert Reilly > Dir Sys Eng > C 203.297.3653 > > > -----Original Message----- > From: Paul Yeatman [mailto:[email protected]] > Sent: Tuesday, October 26, 2010 11:25 PM > To: Robert Reilly > Cc: [email protected]; [email protected] > Subject: Re: bumping > > On Tue, 2010-10-26 at 22:49 -0400, Robert Reilly wrote: > > Hey all, I have a disk list that contains two file systems, total it > > about 2TB, i really only want one full a week, but it seems to do a > > full every other day. I dont care about restore time and needing more > > tapes.. so any help setting the bump parameters to achieve this is > > appreciated. > > > > It sounds like it is a case of overpromoting more than a matter of your > bump parameters. This is a common scenario for overpromoting when your > number of DLEs is less than the days in your dumpcycle. Likely the > dumptype parameter "maxpromoteday" set to 1 or 2 or even 0 would give > you what you want. > > Paul > > > > > > > > > > > Thanks, > > > > > > > > > > > > Robert Reilly > > > > Director Systems Engineering > > > > C 203.297.3653 > > > > W 718.928.1172 > > > > > > > > > -- Paul Yeatman Technical Support Engineer Zmanda, Inc. http://www.zmanda.com
