Jean-Louis,
On Fri, Nov 19, 2010 at 11:08:45AM -0500, Jean-Louis Martineau wrote:
> A 'gmake -k install' should install everything except activate-devpay,
> so everything should works.
I'll give that a try, besides the socket problems I'm having
with 3.1.2 I've also had a couple of jobs hang out on clients
and cause failures in DLE during subsequent amdump runs.
> Do you have all tools to regenerate the Makefile? Do device-src/Makefile
> was regenerated after you patched device-src/Makefile.am?
> From the output below, the patch is not used, You should see a
> '../gnulib/libgnu.la' in the command line.
I didn't run a new configure, but I do see a current timestamp
on the Makefile.
[curie]: /tmp/am-inst/amanda-3.2.0/device-src > ls -l Makefile
-rw-r--r-- 1 brian csusers 60331 Nov 19 10:41 Makefile
Should I re-run ./configure ?
thanks,
Brian
> Jean-Louis
>
> Brian Cuttler wrote:
> >I applied the patch with gmake, ran # make clean, and then # gmake
> >two times. The output of the final command is.
> >
> >[curie]: /tmp/am-inst/amanda-3.2.0/device-src > gmake
> >gmake all-am
> >gmake[1]: Entering directory `/tmp/am-inst/amanda-3.2.0/device-src'
> >/bin/bash ../libtool --tag=CC --mode=link /opt/SUNWspro/bin/cc
> >-I/usr/sfw/include -I/opt/sfw/include -I/usr/local/include
> >-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -L/usr/sfw/lib -L/opt/sfw/lib
> >-R/usr/sfw/lib -R/opt/sfw/lib -o activate-devpay activate-devpay.o -lm
> >-mt -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lglib-2.0 -lsocket -lnsl
> >-lresolv -lintl -lcrypto -L/opt/sfw/lib -lcurl -L/usr/sfw/lib -lssl
> >-lcrypto -lsocket -lnsl -lssl -lcrypto -lsocket -lnsl -ldl -lz libtool:
> >link: /opt/SUNWspro/bin/cc -I/usr/sfw/include -I/opt/sfw/include
> >-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o
> >activate-devpay activate-devpay.o -mt -L/usr/sfw/lib -L/opt/sfw/lib -lm
> >-lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lglib-2.0 -lresolv -lintl
> >/opt/sfw/lib/libcurl.so -lssl -lcrypto -lsocket -lnsl -ldl -lz -mt
> >-R/opt/sfw/lib -R/opt/sfw/lib -R/usr/sfw/lib
> >Undefined first referenced
> > symbol in file
> >rpl_ftello activate-devpay.o
> >ld: fatal: Symbol referencing errors. No output written to activate-devpay
> >gmake[1]: *** [activate-devpay] Error 1
> >gmake[1]: Leaving directory `/tmp/am-inst/amanda-3.2.0/device-src'
> >gmake: *** [all] Error 2
> >
> >
> >Oh - I also tried to install 3.2.0 thinking that perhaps unbuilt
> >files would be upwardly compattible from the prior version, didn't
> >work as I was missing an so.3.2.0 library, don't recall which one
> >but I can reproduce the error if needed.
> >
> > thanks,
> >
> > Brian
> >
> >
> >On Fri, Nov 19, 2010 at 08:02:31AM -0500, Jean-Louis Martineau wrote:
> >
> >>Brian Cuttler wrote:
> >>
> >>>Gerhard,
> >>>
> >>>Oh - continue if errors.
> >>>
> >>>Running # gmake again, with the -k I have the following result.
> >>>
> >>>I have to ask at this point, what is activate-devpay ?
> >>>
> >>>
> >>It's a utility program if you use the S3 device.
> >>
> >>Can you try the attached patch?
> >>
> >>Jean-Louis
> >>
> >
> >
> >---
> > Brian R Cuttler [email protected]
> > Computer Systems Support (v) 518 486-1697
> > Wadsworth Center (f) 518 473-6384
> > NYS Department of Health Help Desk 518 473-0773
> >
> >
> >
> >IMPORTANT NOTICE: This e-mail and any attachments may contain
> >confidential or sensitive information which is, or may be, legally
> >privileged or otherwise protected by law from further disclosure. It
> >is intended only for the addressee. If you received this in error or
> >from someone who was not authorized to send it to you, please do not
> >distribute, copy or use it or any attachments. Please notify the
> >sender immediately by reply e-mail and delete this from your
> >system. Thank you for your cooperation.
> >
> >
> >
>
---
Brian R Cuttler [email protected]
Computer Systems Support (v) 518 486-1697
Wadsworth Center (f) 518 473-6384
NYS Department of Health Help Desk 518 473-0773
IMPORTANT NOTICE: This e-mail and any attachments may contain
confidential or sensitive information which is, or may be, legally
privileged or otherwise protected by law from further disclosure. It
is intended only for the addressee. If you received this in error or
from someone who was not authorized to send it to you, please do not
distribute, copy or use it or any attachments. Please notify the
sender immediately by reply e-mail and delete this from your
system. Thank you for your cooperation.
