Jon LaBadie schrieb:
> Are you certain that the taper was idle during this period?
Yes, it is:
SUMMARY part real estimated
size size
partition : 121
estimated : 121 375374m
flush : 0 0m
failed : 0 0m ( 0.00%)
wait for dumping: 50 212037m ( 56.49%)
dumping to tape : 0 0m ( 0.00%)
dumping : 10 1913m 160783m ( 1.19%) ( 0.51%)
dumped : 61 2268m 2552m ( 88.86%) ( 0.60%)
wait for writing: 60 2268m 2552m ( 88.86%) ( 0.60%)
wait to flush : 0 0m 0m (100.00%) ( 0.00%)
writing to tape : 0 0m 0m ( 0.00%) ( 0.00%)
failed to tape : 0 0m 0m ( 0.00%) ( 0.00%)
taped : 1 0m 0m (100.00%) ( 0.00%)
tape 1 : 1 0m 0m ( 0.00%) KDD073 (2 chunks)
all dumpers active
taper status: Idle
....
> For example, flush-threshold-dumped set to 75, will not tape
> until the amount of completed DLE data available on the holding disk is
> enough to fill a tape at least 75%.
flush-threshold-dumped, flush-threshold-scheduled and taperflush are not
set. Default for all is 0.
