Kevin.
The problem is because one of the dle is bigger than a tape.
I'm working on a fix.
Jean-Louis
Kevin Zembower wrote:
Sorry this has taken so long. Thank you for any help or advice you can
provide.
-Kevin
On Wed, 2010-12-22 at 07:15 -0500, Jean-Louis Martineau wrote:
Kevin,
Post the amdump.? log file, I want to look at it.
Jean-Louis
Kevin Zembower wrote:
> I'm having problems when I try to set amanda up to completely fill my
> tapes. One of my disklist entries is about 600GB at level 0. I'm using
> amanda 3.2.1 on a RHEL5 tapehost with Ultrium tapes that hold 200GB. I
> set:
> flush-threshold-dumped 100
> flush-threshold-scheduled 100
> taperflush 100
> autoflush yes
>
> When I watch amstatus, I see the big DLE tape tape up to 100%, but then
> it reports a PARTIAL tape. Then all the other DLEs waiting to tape
> report "process canceled waiting to be taped" and they stay on the
> holding disk. The report states that 602GB were left on the holding
> disk.
>
> When I set the three variables to 0, taping proceeds normally, and the
> big DLE and the rest of the DLEs span four tapes correctly. However,
> most of the time, the tapes are only filled to less than 5%.
>
> Any suggestions on what I can do to fill tapes to capacity? Thanks for
> your help and suggestions.
>
> -Kevin
>
>
