hi everyone,
I installed Amanda-3.3.2 on debian (32 bit) from source code.
./configure --with-user=amanda --with-group=backup --with-rsh-security
--with-ssh-security --with-smbclient --with-bsdtcp-security --disable-nls
Everytihnks goes fine but I can't run amlabel, amdump or amcheck with "-t"
parameter.
amanda@bulut:/usr/local/etc/amanda/SERVERS$ amcheck -t SERVERS
Amanda Tape Server Host Check
-----------------------------
Current slot not loaded
Taper scan algorithm did not find an acceptable volume.
(expecting a new volume)
ERROR: No acceptable volumes found
Server check took 2.141 seconds
(brought to you by Amanda 3.3.2)
amanda@bulut:/usr/local/etc/amanda/SERVERS$ amlabel -f SERVERS Tape-02
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 2: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 2: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 6: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 6: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 9: FIRST, FIRSTFIT, LARGEST,
LARGESTFIT, SMALLEST or LAST expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 11: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 11: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 21: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 21: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 22: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 27: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 27: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 29: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 29: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 31: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 31: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 35: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 35: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 36: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 38: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 38: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 52: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 52: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 60: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 60: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 61: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 62: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 63: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 63: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 65: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 66: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 66: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 67: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 68: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 70: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 70: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 72: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 72: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 74: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 74: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 77: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 77: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 78: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 78: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 80: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 81: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 82: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 82: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 83: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 84: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 85: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 87: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 87: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 88: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 88: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 90: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 91: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 92: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 93: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 93: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 95: duplicate parameter;
previous definition /usr/local/etc/amanda/SERVERS/amanda.conf:16
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 96: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 97: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 100: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 100: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 101: error: not a keyword.
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 101: end of line is expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 103: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 104: configuration keyword
expected
"/usr/local/etc/amanda/SERVERS/amanda.conf", line 105: error: not a keyword.
parse error: tapetype HP-DAT is not defined
I have a tape unit with no tape changer: /dev/nst0
I notice my amanda.conf file but I can't find anything strange
My amanda.conf file is here;
org "etc" # your organization name for reports
mailto "[email protected]" # space separated list of operators at your site
dumpuser "amanda" # the user to run dumps under
inparallel 1
dumporder "sssS" # specify the priority order of each dumper
taperalgo first # The algorithm used to choose which dump image to send
displayunit "k" # Possible values: "k|m|g|t"
netusage 8000 Kbps # maximum net bandwidth for Amanda, in KB per sec
dumpcycle 4 weeks # the number of days in the normal dump cycle
runspercycle 20 # the number of amdump runs in dumpcycle days
# (4 weeks * 5 amdump runs per week -- just weekdays)
tapecycle 25 tapes # the number of tapes in rotation
bumpsize 20 Mb # minimum savings (threshold) to bump level 1 -> 2
bumppercent 20 # minimum savings (threshold) to bump level 1 -> 2
bumpdays 1 # minimum days at each level
bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
etimeout 300 # number of seconds per filesystem for estimates.
dtimeout 1800 # number of idle seconds before a dump is aborted.
ctimeout 30 # maximum number of seconds that amcheck waits
# for each client host
device_output_buffer_size 1280k
usetimestamps yes
flush-threshold-dumped 0
flush-threshold-scheduled 0
taperflush 0
autoflush no
runtapes 1 # number of tapes to be used in a single run of
amdump
tpchanger "chg-manual"
changerdev "/dev/null"
tapedev "/dev/nst0"
maxdumpsize -1 # Maximum number of bytes the planner will schedule
# for a run (default: runtapes * tape_length).
tapetype HP-DAT # what kind of tape it is (see tapetypes below)
labelstr "^Tape-[0-9][0-9]*$" # label constraint regex: all tapes must match
amrecover_changer "changer" # amrecover will use the changer if you restore
holdingdisk hd1 {
comment "main holding disk"
directory "/tmp/holdingdisk"
use -100 Mb
chunksize 1Gb
}
infofile "/usr/local/etc/amanda/SERVERS/curinfo" # database DIRECTORY
logdir "/usr/local/etc/amanda/SERVERS" # log directory
indexdir "/usr/local/etc/amanda/SERVERS/index" # index directory
define tapetype HP-DAT {
comment "DAT tape drives"
length 1930 mbytes
filemark 111 kbytes
speed 468 kbytes
}
define dumptype dump-local {
comment "Full dump of this filesystem always"
compress none
program "GNUTAR"
priority high
dumpcycle 0
auth "local"
}
define interface local {
comment "a local disk"
use 8000 kbps
}
Note: I installed amanda-server and amanda-client with apt but same errors
happenned.
+----------------------------------------------------------------------
|This was sent by [email protected] via Backup Central.
|Forward SPAM to [email protected].
+----------------------------------------------------------------------
