Hello,

   Can anyone suggest a solution to this problem?
   
   I upgraded from 3.3.0 to 3.3.3 in order to use the 
   hp-robot changer.
   
   Amcheck does not report any problems.
   
   Amanda fails with:

Date    : March 12, 2013

These dumps were to tape AMADSet13a-563.
The next 15 tapes Amanda expects to use are: 14 new tapes, AMADSet13a-563.
The next 14 new tapes already labelled are: AMADSet13a-560, AMADSet13a-561, 
AMADSet13a-562, AMADSet13a-564, AMADSet13a-565, AMADSet13a-566, AMADSet13a-567, 
AMADSet13a-568, AMADSet13a-569, AMADSet13a-570, AMADSet13a-571, AMADSet13a-572, 
AMADSet13a-573, AMADSet13a-574
FAILURE DUMP SUMMARY:
  node35bk.rtpnc.epa.gov /13w lev 0  FAILED [can't dump 'holdingdisk never' dle 
in degraded mode]
  node35bk.rtpnc.epa.gov /13w lev 0  FAILED [data write: Connection reset by 
peer]
  node35bk.rtpnc.epa.gov /13w lev 0  partial taper: error from mtx: destination 
Element Address 500 is Already Full



STATISTICS:
                          Total       Full      Incr.   Level:#
                        --------   --------   --------  --------
Estimate Time (hrs:min)     0:01
Run Time (hrs:min)          0:27
Dump Time (hrs:min)         0:00       0:00       0:00
Output Size (meg)            0.0        0.0        0.0
Original Size (meg)          0.0        0.0        0.0
Avg Compressed Size (%)      --         --         --
DLEs Dumped                    0          0          0
Avg Dump Rate (k/s)          --         --         --

Tape Time (hrs:min)         0:25       0:25       0:00
Tape Size (meg)              0.0        0.0        0.0
Tape Used (%)                0.0        0.0        0.0
DLEs Taped                     1          1          0
Parts Taped                    1          1          0
Avg Tp Write Rate (k/s)      0.0        0.0        --

USAGE BY TAPE:
  Label               Time         Size      %  DLEs Parts
  AMADSet13a-563      0:07    17550496K    1.2     1     1

FAILED DUMP DETAILS:
  /-- node35bk.rtpnc.epa.gov /13w lev 0 FAILED [data write: Connection reset by 
peer]
  sendbackup: start [node35bk.rtpnc.epa.gov:/13w level 0]
  sendbackup: info BACKUP=/bin/tar
  sendbackup: info RECOVER_CMD=/bin/tar -xpGf - ...
  sendbackup: info end
  \--------

NOTES:
  planner: Adding new disk node35bk.rtpnc.epa.gov:/13w.
  taper: Slot 4 with label AMADSet13a-563 is usable
  taper: Will request retry of failed split part.
  taper: tape AMADSet13a-563 kb 0 fm 1 [OK]
  taper: error from mtx: destination Element Address 500 is Already Full
  taper: error from mtx: destination Element Address 500 is Already Full


DUMP SUMMARY:
                                                 DUMPER STATS               
TAPER STATS
HOSTNAME               DISK        L ORIG-KB  OUT-KB  COMP%  MMM:SS   KB/s 
MMM:SS   KB/s
------------------------------------ ------------------------------------- 
-------------
node35bk.rtpnc.epa.gov /13w        0                     --    PARTIAL      
25:19    0.0 PARTIAL

(brought to you by Amanda version 3.3.3)

    Thanks in advance...have a nice day!
   
******************
Leslie(Pete) Boyd         
Contractor:               The rich man isn't the one who has the most,
Vision Technoligies       but the one who needs the least. 
Senior Systems Engineer   
US EPA  Rm. E460                --- IN GOD WE TRUST --  
919/541-1438                     
******************


Reply via email to