Hello,
System OS:CentOS release 5.9 (Final)
Amanda:(brought to you by Amanda version 3.3.3)
Tape Library: SUN SL500 with 3 LT05 drives/90 slots
This setup works great!
However, if AMANDA attempts to change a tape and I have
the CAP door open, it will fail with:
These dumps were to tapes AMADSet5-30, AMADSet5-31, AMADSet5-32, AMADSet5-33.
The next 7 tapes Amanda expects to use are: 3 new tapes, AMADSet5-30,
AMADSet5-31, AMADSet5-32, AMADSet
5-33.
The next 3 new tapes already labelled are: AMADSet5-29, AMADSet5-34, AMADSet5-35
FAILURE DUMP SUMMARY:
taper: FATAL no device is available to check the datapath at
/usr/lib/perl5/site_perl/5.8.8/Amanda/Ta
per/Scribe.pm line 593
node36bk.rtpnc.epa.gov /5w lev 0 FAILED [data write: Connection reset by
peer]
node36bk.rtpnc.epa.gov /5w lev 0 partial taper: reservation belongs to
another instance
Is there some setting I can use to tell AMANDA to wait until the
loader is back in service?
AMANDA report and amanda.conf(partial) files are attached.
Thanks in advance...have a great day!
******************
Leslie(Pete) Boyd
Contractor: The rich man isn't the one who has the most,
Vision Technoligies but the one who needs the least.
Senior Systems Engineer
US EPA Rm. E460 --- IN GOD WE TRUST --
919/541-1438
******************
[amanda@sl501 tmp]$ more *5.rpt
Hostname: sl501.rtpnc.epa.gov
Org : US EPA(NERL/AMAD
Config : AMADSet5
Date : March 28, 2013
These dumps were to tapes AMADSet5-30, AMADSet5-31, AMADSet5-32, AMADSet5-33.
The next 7 tapes Amanda expects to use are: 3 new tapes, AMADSet5-30,
AMADSet5-31, AMADSet5-32, AMADSet
5-33.
The next 3 new tapes already labelled are: AMADSet5-29, AMADSet5-34, AMADSet5-35
FAILURE DUMP SUMMARY:
taper: FATAL no device is available to check the datapath at
/usr/lib/perl5/site_perl/5.8.8/Amanda/Ta
per/Scribe.pm line 593
node36bk.rtpnc.epa.gov /5w lev 0 FAILED [data write: Connection reset by
peer]
node36bk.rtpnc.epa.gov /5w lev 0 partial taper: reservation belongs to
another instance
STATISTICS:
Total Full Incr. Level:#
-------- -------- -------- --------
Estimate Time (hrs:min) 0:01
Run Time (hrs:min) 27:54
Dump Time (hrs:min) 0:00 0:00 0:00
Output Size (meg) 5727914.1 5727914.1 0.0
Original Size (meg) 0.0 0.0 0.0
Avg Compressed Size (%) -- -- --
DLEs Dumped 0 0 0
Avg Dump Rate (k/s) -- -- --
Tape Time (hrs:min) 27:53 27:53 0:00
Tape Size (meg) 5727914.1 5727914.1 0.0
Tape Used (%) 396.1 396.1 0.0
DLEs Taped 1 1 0
Parts Taped 4 4 0
Avg Tp Write Rate (k/s) 58427.7 58427.7 --
USAGE BY TAPE:
Label Time Size % DLEs Parts
AMADSet5-30 6:59 1451455424K 98.0 1 1
AMADSet5-31 7:04 1466921472K 99.1 0 1
AMADSet5-32 6:50 1466209792K 99.0 0 1
AMADSet5-33 6:54 1480797312K 100.0 0 1
FAILED DUMP DETAILS:
/-- node36bk.rtpnc.epa.gov /5w lev 0 FAILED [data write: Connection reset by
peer]
sendbackup: start [node36bk.rtpnc.epa.gov:/5w level 0]
sendbackup: info BACKUP=/bin/tar
sendbackup: info RECOVER_CMD=/bin/tar -xpGf - ...
sendbackup: info end
\--------
NOTES:
planner: Adding new disk node36bk.rtpnc.epa.gov:/5w.
driver: Taper protocol error
driver: going into degraded mode because of taper component error.
taper: Slot 39 with label AMADSet5-30 is usable
taper: tape AMADSet5-30 kb 1451455424 fm 1 [OK]
taper: Slot 40 with label AMADSet5-31 is usable
taper: tape AMADSet5-31 kb 1466921472 fm 1 [OK]
taper: Slot 41 with label AMADSet5-32 is usable
taper: tape AMADSet5-32 kb 1466209792 fm 1 [OK]
taper: Slot 42 with label AMADSet5-33 is usable
taper: tape AMADSet5-33 kb 1480797312 fm 1 [OK]
DUMP SUMMARY:
DUMPER STATS
TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s
MMM:SS KB/s
------------------------------------ ----------------------------------------
--------------
node36bk.rtpnc.epa.gov /5w 0 5865384000 -- PARTIAL
1673:0 58427.7 PARTIAL
(brought to you by Amanda version 3.3.3)
[amanda@sl501 tmp]$
define changer hp-robot {
tapedev "chg-robot:/dev/sg10"
property "use-slots" "38-44"
# property "tape-device" "0=tape:/dev/nst0"
# property append "tape-device" "1=tape:/dev/nst1"
property append "tape-device" "2=tape:/dev/nst2"
# property "load-poll" "20s poll 15s until 120s"
# device-property "BLOCK_SIZE" "512k"
}
