Jean-Louis,
On Thu, Apr 25, 2013 at 11:03:50AM -0400, Jean-Louis Martineau wrote:
> On 04/25/2013 10:39 AM, Brian Cuttler wrote:
> >Already, _now_ I'm ready to solve the real problem...
> >
> >Server is Solaris 10 x86, Amanda server 3.1.2.
> >
> >Client, a CentOS 5x box has had amanda 2.5.... removed
> >in favor of 3.3.0-1.
> >
> >I've finally figured out the dumptype/auth/protocal, amcheck
> >is running properly.
> >
> > From the amanda debug file, I find the config directory to be
> >/etc/amanda, and the default config name "DailySet1", so I
> >have copied the amanda.conf from the server to
> >/etc/amanda/DailySet1/amanda-client.conf (on the client).
> amandad process do not read the per-config amanda-client.conf.
> Put it in /etc/amanda/amanda-client.conf
JML replies
> Btw. The bsdtcp auth, it is a lot easier to configure, that's why it is the
> default auth in 3.3
On the server I changed the DLE dumptype of my user-tar2 which
specifies auth bsdtcp.
On the client changed the /etc/xinetd.d/amanda
socket_type from dgram to stream
protocal from udp to tcp
and
server_args from -auth=bsd amdump to -auth=bsdtcp amdump
and restarted the xinetd on the client.
This didn't work... don't know what I missed, and reverted
the changes because I'd thought I was close the other way...
Q1: What did I miss?
I moved the amanda-client.conf from /etc/amanda/DailySet1/ to
/etc/amanda and began removing lines that the amdump report
said where invalid. I quickly decided to google it and found
the 15-minute install guide and trashed my amanda-client.conf,
leaving only the following lines.
[root@stema amanda]# more amanda-client.conf
conf "curie"
auth "bsd"
unreserved-tcp-port 1083,10101
reserved-udp-port 931,949
Now when I run # amdump curie stemcell-stage, on the server
the amanda report shows:
stemcell-stage /etc lev 1 FAILED [too many dumper retry: [could not
connect DATA stream: can't connect stream to stema.wadsworth.org port
1753: Connection timed out]]
Not sure where I'm goofing this up.
Not against using BSDTCP, just don't understand why I can't seem
to configure it.
thank you,
Brian
---
Brian R Cuttler [email protected]
Computer Systems Support (v) 518 486-1697
Wadsworth Center (f) 518 473-6384
NYS Department of Health Help Desk 518 473-0773
