Installed Amanda 3.3.0 on solaris 10/x86 two days ago.
Have found that both amdumps since did not complete normally.
While completing all DLE and sending the report.
> amstatus finsen
Using /usr/local/etc/amanda/finsen/DailySet1/amdump
>From Thu Jun 6 18:30:00 EDT 2013
finsen:/ 0 43283m estimate done
finsen:/export 0 20448m estimate done
finsen:/export/home-A 0 118m estimate done
finsen:/export/home-AZ 0 0m estimate done
< MANY LINES REMOVED>
finsen:hp10p/flyshare 0 403m estimate done
finsen:hp10p/grifadmin 0 783m estimate done
finsen:hp10p/hiu 0 74691m estimate done
finsen:hp10p/hiu2 0 22763m estimate done
finsen:hp10p/ivcp 0 26015m estimate done
finsen:hp10p/virologypt 0 15m estimate done
SUMMARY part real estimated
size size
partition : 265
estimated : 265 3902078m
flush : 0 0m
failed : 0 0m ( 0.00%)
wait for dumping: 0 0m ( 0.00%)
dumping to tape : 0 0m ( 0.00%)
dumping : 0 0m 0m ( 0.00%) ( 0.00%)
dumped : 0 0m 0m ( 0.00%) ( 0.00%)
wait for writing: 0 0m 0m ( 0.00%) ( 0.00%)
wait to flush : 0 0m 0m (100.00%) ( 0.00%)
writing to tape : 0 0m 0m ( 0.00%) ( 0.00%)
failed to tape : 0 0m 0m ( 0.00%) ( 0.00%)
taped : 0 0m 0m ( 0.00%) ( 0.00%)
12 dumpers idle : not-idle
taper status: Idle
taper qlen: 0
network free kps: 8000000
holding space : 546122m (100.00%)
0 dumpers busy : 0:00:05 (100.00%) not-idle: 0:00:05 (100.00%)
we where left with processes that did not unwind.
> ps -ef | grep amanda
amanda 16257 16256 13 18:30:01 ? 879:30
/usr/local/libexec/amanda/planner finsen --starttime 20130606183000
amanda 16271 16258 0 18:30:01 ? 0:00 dumper11 finsen
amanda 16267 16258 0 18:30:01 ? 0:00 dumper7 finsen
amanda 16263 16258 0 18:30:01 ? 0:00 dumper3 finsen
amanda 27743 8729 0 09:11:17 pts/14 0:00 -tcsh
amanda 16270 16258 0 18:30:01 ? 0:00 dumper10 finsen
amanda 16260 16258 0 18:30:01 ? 0:00 dumper0 finsen
amanda 16262 16258 0 18:30:01 ? 0:00 dumper2 finsen
amanda 27766 27743 0 09:11:45 pts/14 0:00 grep amanda
amanda 16268 16258 0 18:30:01 ? 0:00 dumper8 finsen
amanda 27765 27743 0 09:11:45 pts/14 0:00 ps -ef
amanda 16256 16253 0 18:30:01 ? 0:00 /usr/local/bin/perl
/usr/local/sbin/amdump finsen
amanda 16259 16258 0 18:30:01 ? 0:00 /usr/local/bin/perl
/usr/local/libexec/amanda/taper finsen
amanda 16266 16258 0 18:30:01 ? 0:00 dumper6 finsen
amanda 16264 16258 0 18:30:01 ? 0:00 dumper4 finsen
amanda 16261 16258 0 18:30:01 ? 0:00 dumper1 finsen
amanda 16258 16256 0 18:30:01 ? 0:00
/usr/local/libexec/amanda/driver finsen
amanda 16253 541 0 18:30:01 ? 0:00 sh -c /usr/local/sbin/amdump
finsen
amanda 16265 16258 0 18:30:01 ? 0:00 dumper5 finsen
amanda 16269 16258 0 18:30:01 ? 0:00 dumper9 finsen
This is new behavior since amanda 3.3.0 which was the previous
version on this system.
Amanda server has only one client, itself.
I'm not sure where to even start unraveling this.
thank you,
Brian
---
Brian R Cuttler [email protected]
Computer Systems Support (v) 518 486-1697
Wadsworth Center (f) 518 473-6384
NYS Department of Health Help Desk 518 473-0773
