Steven,
Let me know if the patch works or not.
Jean-Louis
On 01/06/2014 01:13 PM, Jean-Louis Martineau wrote:
Try this patch, chg-robot retry the mtx command if it failed with 'No
Sense'.
Jean-Louis
On 01/06/2014 01:04 PM, Steven Backus wrote:
The complete output of mtx is not logged, run it on the command line to
get the complete output:
/usr/sbin/mtx -f /dev/changer nobarcode status
Storage Changer /dev/sg6:1 Drives, 7 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
Storage Element 1:Empty
Storage Element 2:Full
Storage Element 3:Full
Storage Element 4:Full
Storage Element 5:Full
Storage Element 6:Full
Storage Element 7:Full
'it always works the 2nd time', Did it always works the 3rd and 4th
time?
Yes, after the first fail, it always works. Then several days
later I try switching tapes and it fails again the first time and
always works again after that.
When is the first time?
The "first time" is Monday morning after I've done a dump to the
holding disk. I do 6 amdumps during the week:
M degraded
T flush to tape
W degraded
Th degraded
F flush to tape
S degraded
Steve
