My config merely has
holdingdisk hd1 { yada yada yada
}
Does it work because I didn't DEFINE it but merely declared it to be?
Just wondering. It works fine…. I've left the param in the dump type out,
so I guess I'm getting the "auto" for yes, do use it.
Deb
On Feb 27, 2014, at 2:21 PM, Jean-Louis Martineau <[email protected]>
wrote:
> Michael,
>
> You define the holdingdisk but you don't tell amanda to use it.
>
> Add:
> holdingdisk "holdingdisk1"
> after the define
>
> Jean-Louis
>
> On 02/27/2014 03:09 PM, Michael Stauffer wrote:
>> Amanda 3.3.4
>>
>> Hi,
>>
>> Seems like I'm having trouble getting amanda to use my holding disk.
>>
>> Here's my setup in amanda.conf:
>>
>> define holdingdisk holdingdisk1 {
>> directory "/mnt/amanda-holdingdisk1/"
>> use 4500Gb
>> chunksize 100Gb
>> }
>>
>> define dumptype gui-base {
>> global
>> program "GNUTAR"
>> comment "gui base dumptype dumped with tar"
>> compress none
>> index yes
>> maxdumps 2
>> max-warnings 100
>> allow-split true #Stauffer. Default is true.
>> holdingdisk yes #Stauffer. Default is auto.
>> }
>>
>>
>> When I run amcheck, it's not giving me any msg regarding holding disk,
>> positive or negative. A few things I've seen online have shown amcheck
>> reporting on holding disk status.
>>
>> My tapetype has this:
>>
>> #settings for splitting/spanning
>> part_size 190G # about 1/10 of tape size - should be used when using
>> holding disk
>> # these should be used when no holding disk is used - but cache size
>> determines
>> # part size (AFAIK), and lots of small parts in a dump is said to be
>> inefficient
>> part_cache_type memory
>> part_cache_max_size 12G
>>
>>
>> I ran a level 0 dump and saw this:
>>
>> USAGE BY TAPE:
>> Label Time Size % DLEs Parts
>> 000406-jet1 21:21 2152G 152.1 2 181
>> 000407-jet1 7:17660G 46.6 1 56
>>
>> which looks to me like parts of 12G, close to my 14G cache size.
>>
>> Do I need to do something else to tell amanda to use my holding disk? Thanks.
>>
>> -M
>
