Hi all, I have a setup where I have a holding disk and vtapes. Then I try to use amvault to copy the latest full backups to tape. This works if I use amvault's --fulls-only with --src-storage parameter and use the vtapes as the source. But if I try to vault backups that are still on the holding disk by using --latest-fulls. Amvault tries to copy the first full to tape but hangs indefinitely.
The full redacted command line is sudo -u backup amvault --dest-storage tapelibrary --latest-fulls backupset Here's the relevant part of the redacted log file. ma loka 11 09:23:13.626028751 2021: pid 1126324: thd-0x562b5502a400: amvault: Amanda::Taper::Scan::traditional result: 'redacted-vault-1014' on tape:/dev/nst0 slot 8, mode 2 ma loka 11 09:23:13.627741696 2021: pid 1126324: thd-0x562b5502a400: amvault: /usr/lib/x86_64-linux-gnu/amanda/perl/Amanda/Vault.pm:1196:info:2500017 Reading '/backup/amanda/holding/20211004180502/<redacted>._.0': FILE: date 20211004180502 host <redacted> disk / lev 0 comp .gz program /bin/tar crypt enc client_encrypt /usr/sbin/amcrypt-ossl client_decrypt_option -d ma loka 11 09:23:13.627958672 2021: pid 1126324: thd-0x562b5502a400: amvault: Amanda::Recovery::Clerk: successfully located holding file for recovery ma loka 11 09:23:13.628001640 2021: pid 1126324: thd-0x562b5502a400: amvault: start_recovery called ma loka 11 09:23:13.628634814 2021: pid 1126324: thd-0x562b5502a400: amvault: Amanda::Taper::Scribe preparing to write, part size 0, using LEOM detection (no caching) (splitter) (LEOM supported) ma loka 11 09:23:13.639842536 2021: pid 1126324: thd-0x562b5502a400: amvault: Starting <Xfer@0x562b572a4850 (<XferSourceHolding@0x562b57f15010> -> <XferDestTaperSplitter@0x562b57fdf060>)> ma loka 11 09:23:13.639865559 2021: pid 1126324: thd-0x562b5502a400: amvault: Final linkage: <XferSourceHolding@0x562b57f15010> -(MEM_RING)-> <XferDestTaperSplitter@0x562b57fdf060> ma loka 11 09:23:13.639986931 2021: pid 1126324: thd-0x562b5502a400: amvault: Amanda::Recovery::Clerk: starting recovery ma loka 11 09:23:13.641060521 2021: pid 1126324: thd-0x562b5502a400: amvault: start_recovery called And then nothing. Is this a bug or am I doing something wrong? Kind regards, Rami Lehti
