To handle changing device names use ex /dev/tape/by-id/scsi-HUE12340E22-nst and
/dev/tape/by-id/scsi-DEC1234567
Anton "exuvo" Olsson
ex...@exuvo.se
On 2022-05-25 14:50, Stefan G. Weichinger wrote:
Am 25.05.22 um 14:41 schrieb Nuno Dias:
My conf (the relevant parts)
tpchanger "robot"
define changer robot {
tpchanger "chg-robot:/dev/changer"
changerfile "/etc/amanda/XXXX/changer-state"
property "tape-device" "0=tape:/dev/nst0"
property "eject-before-unload" "no"
property "use-slots" "1-100"
property "load-poll" "0s poll 3s until 120s"
}
amrecover_changer "/dev/changer"
and /dev/changer is a sym link to /dev/sg11
So let me explain what is /dev/sg11 ... this is the device that
allows the manipulation and see the tapes and drives of the
robot, for example can be used with the command mtx
$ mtx -f /dev/sg11 status
Sure, thanks, I know what /dev/sg11 is ;-) in my case /dev/sg21
(although that seems to change with reboots sometimes .. another topic)
The difference between your and my conf is only that symlink.
I directly have
tpchanger "chg-robot:/dev/sg21"
and
amrecover_changer "/dev/sg21"
-
Currently I have another amrecover running. It restored from tape1 .. and now I only see
these lines in the current debug file "amidxtaped.20220525123652.debug":
Wed May 25 14:48:25.078884308 2022: pid 705002: thd-0x556f690aca00: amidxtaped:
/usr/lib64/perl5/vendor_perl/5.32/Amanda/Restore.pm:1719:info:4900000 12472320
kb
Wed May 25 14:48:40.090891256 2022: pid 705002: thd-0x556f690aca00: amidxtaped:
/usr/lib64/perl5/vendor_perl/5.32/Amanda/Restore.pm:1719:info:4900000 12472320
kb
Wed May 25 14:48:55.102880465 2022: pid 705002: thd-0x556f690aca00: amidxtaped:
/usr/lib64/perl5/vendor_perl/5.32/Amanda/Restore.pm:1719:info:4900000 12472320
kb
... for hours now.
Is that OK? Maybe tar still "scans" through that first tarball on tape ... ?