Hi
I want to start smtp authentication in sendmail-dual + amavisd-new
I did everything was requried for use smtp auth .
I compiled sendmail with cyrus-sasl2 + TLS . I send sendmail-rx.mc and
sendmail.mc . I don't know where is my problem for using smtp auth in
sendmail. now tls is active but smtp auth no.
-- With Regards
-- Sophia Alikhani
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/
divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make changes to
dnl # /etc/mail/sendmail.mc, you will need to regenerate the
dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is
dnl # installed and then performing a
dnl #
dnl # make -C /etc/mail
dnl #
include(`/usr/local/src/sendmail-8.13.4/cf/m4/cf.m4')dnl
VERSIONID(`setup for Red Hat Linux')dnl
OSTYPE(`linux')dnl
dnl #
dnl # Uncomment and edit the following line if your outgoing mail needs to
dnl # be sent out through an external mail server:
dnl #
dnl define(`SMART_HOST',`smtp.your.provider')
dnl #
define(`confDEF_USER_ID',``8:12'')dnl
define(`confTRUSTED_USER', `smmsp')dnl
dnl define(`confAUTO_REBUILD')dnl
define(`confTO_CONNECT', `1m')dnl
define(`confTRY_NULL_MX_LIST',true)dnl
define(`confDONT_PROBE_INTERFACES',true)dnl
define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
define(`ALIAS_FILE', `/etc/mail/aliases')dnl
dnl define(`STATUS_FILE', `/etc/mail/statistics')dnl
define(`UUCP_MAILER_MAX', `2000000')dnl
define(`confMAX_MESSAGE_SIZE', `15000000')dnl
define(`confMAX_DAEMON_CHILDREN', `30')dnl
define(`confCONNECTION_RATE_THROTTLE', `2')dnl
define(`confMAXRCPTSPERMESSAGE', `50')dnl
define(`confSINGLE_LINE_FROM_HEADER', `True')dnl
define(`confSMTP_LOGIN_MSG', `$w.tx.$m Sendmail $v/$Z; $b')dnl
define(`confTO_INITIAL', `6m')dnl
define(`confTO_HELO', `5m')dnl
define(`confTO_HOSTSTATUS', `2m')dnl
define(`confTO_DATAINIT', `6m')dnl
define(`confTO_DATABLOCK', `35m')dnl
define(`confTO_DATAFINAL', `35m')dnl
define(`confALIAS_WAIT', `0')dnl
define(`confMAX_HOP', `45')dnl
define(`confQUEUE_LA', `5')dnl
define(`confREFUSE_LA', `999')dnl
define(`confSEPARATE_PROC', `False')dnl
define(`confWORD_RECIPIENT_FACTOR', `1000')dnl
define(`confWORK_TIME_FACTOR', `3000')dnl
define(`confQUEUE_SORT_ORDER', `Time')dnl
define(`confPRIVACY_FLAGS',
`authwarnings,goaway,restrictmailq,restrictqrun,needmailhelo')dnl
define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl
define(`confMAPDEF', `-DNDBM -DMAP-REGEX -DNEWDB')dnl
define(`confLIBS', `-lsocket -lnsl -ldb')dnl
define(`confDONT_INSTALL_CATMAN', `true')dnl
dnl #
dnl # The following allows relaying if the user authenticates, and disallows
dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links
dnl #
dnl define(`confAUTH_OPTIONS', `A p')dnl
dnl #
dnl # PLAIN is the preferred plaintext authentication method and used by
dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do
dnl # use LOGIN. Other mechanisms should be used if the connection is not
dnl # guaranteed secure.
dnl #
define(`confAUTH_OPTIONS', `A p y')dnl
define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
dnl #
dnl # Rudimentary information on creating certificates for sendmail TLS:
dnl # make -C /usr/share/ssl/certs usage
dnl #
define(`confCACERT_PATH',`/etc/mail/certs')dnl
define(`confCACERT',`/etc/mail/certs/cacert.pem')dnl
define(`confSERVER_CERT',`/etc/mail/certs/sendmail.pem')dnl
define(`confSERVER_KEY',`/etc/mail/certs/sendmail.pem')dnl
define(`confCLIENT_CERT',`/etc/mail/certs/sendmail.pem')dnl
define(`confLOG_LEVEL', `14')dnl
dnl # define(`confMILTER_LOG_LEVEL', `9')dnl
dnl # define(`confMILTER_MACROS_HELO', confMILTER_MACROS_HELO`, {verify}')dnl
dnl # define(`confINPUT_MAIL_FILTERS', `clamav')
dnl #
dnl #This allows sendmail to use a keyfile that is shared with OpenLDAP's
dnl # slapd, which requires the file to be readble by group ldap
dnl #
dnl define(`confDONT_BLAME_SENDMAIL',`groupreadablekeyfile')dnl
dnl #
dnl define(`confTO_QUEUEWARN', `4h')dnl
dnl define(`confTO_QUEUERETURN', `5d')dnl
dnl define(`confQUEUE_LA', `12')dnl
dnl define(`confREFUSE_LA', `18')dnl
define(`confTO_IDENT', `0')dnl
define(`confDELIVERY_MODE', `queue')dnl
FEATURE(delay_checks)dnl
FEATURE(`no_default_msa')dnl
FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
FEATURE(`genericstable',`hash -o /etc/mail/genericstable.db')dnl
dnl #FEATURE(dnsbl, `ipwhois.rfc-ignorant.org', `"550 Mail from "
$&{client_addr} " refused. Rejected for bad WHOIS info onIP of your SMTP server
- see http://www.rfc-ignorant.org/";')dnl
FEATURE(dnsbl,`blackholes.mail-abuse.org', ` Mail from $&{client_addr}
rejected;see http://mail-abuse.org/cgi-bin/lookup?$&; {client_addr}')dnl
FEATURE(dnsbl,`dialups.mail-abuse.org', ` Mail from dial-up rejected;see
http://mail-abuse.org/dul/enduser.htm')dnl
dnl #FEATURE(rhsbl,`dsn.rfc-ignorant.org',`"550 Mail from domain " $`'&{RHS} "
refused. MX of domain do not accept bounces. This violates RFC 821/2505/2821
-see http://www.rfc-ignorant.org/";')dnl
dnl #FEATURE(rhsbl,`postmaster.rfc-ignorant.org',`"550 Mail from domain "
$`'&{RHS} " refused. MX of domain does not have a working postmaster address -
see http://www.rfc-ignorant.org/";')dnl
FEATURE(redirect)dnl
FEATURE(always_add_domain)dnl
FEATURE(use_cw_file)dnl
FEATURE(use_ct_file)dnl
dnl #
dnl # The -t option will retry delivery if e.g. the user runs over his quota.
dnl #
FEATURE(local_procmail,`',`procmail -t -Y -a $h -d $u')dnl
FEATURE(`access_db',`hash -T<TMPF> -o /etc/mail/access.db')dnl
FEATURE(`blacklist_recipients')dnl
FEATURE(`nouucp', `reject')dnl
EXPOSED_USER(`root')dnl
dnl #
dnl # The following causes sendmail to only listen on the IPv4 loopback address
dnl # 127.0.0.1 and not on any other network devices. Remove the loopback
dnl # address restriction to accept email from the internet or intranet.
dnl #
dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 587 for
dnl # mail from MUAs that authenticate. Roaming users who can't reach their
dnl # preferred sendmail daemon due to port 25 being blocked or redirected find
dnl # this useful.
dnl #
dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 465, but
dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed
dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't
dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS
dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps
dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1.
dnl #
dnl # For this to work your OpenSSL certificates must be configured.
dnl #
dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl
DAEMON_OPTIONS(`Addr=127.0.0.1, Port=10025, Name=MTA-TX')dnl
dnl #
dnl # The following causes sendmail to additionally listen on the IPv6 loopback
dnl # device. Remove the loopback address restriction listen to the network.
dnl #
dnl # NOTE: binding both IPv4 and IPv6 daemon to the same port requires
dnl # a kernel patch
dnl #
DAEMON_OPTIONS(`port=465, Name=MTA-SSL, Family=inet, M=s')dnl
dnl #
dnl # We strongly recommend not accepting unresolvable domains if you want to
dnl # protect yourself from spam. However, the laptop and users on computers
dnl # that do not have 24x7 DNS do need this.
dnl #
dnl # FEATURE(`accept_unresolvable_domains')dnl
dnl #
dnl # FEATURE(`relay_based_on_MX')dnl
dnl #
dnl # Also accept email sent to "localhost.localdomain" as local email.
dnl #
LOCAL_DOMAIN(`localhost.localdomain')dnl
dnl #
dnl # The following example makes mail from this host and any additional
dnl # specified domains appear to be sent from mydomain.com
dnl #
dnl # FEATURE(`masquerade_envelope')dnl
FEATURE(`relay_entire_domain')dnl
MASQUERADE_AS(`itrc.ac.ir')dnl
dnl #
dnl # masquerade not just the headers, but the envelope as well
dnl #
dnl FEATURE(masquerade_envelope)dnl
dnl #
dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well
dnl #
dnl FEATURE(masquerade_entire_domain)dnl
dnl #
dnl MASQUERADE_DOMAIN(localhost)dnl
dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl
dnl MASQUERADE_DOMAIN(mydomain.lan)dnl
dnl #FEATURE(dcc)
dnl #define(`LOCAL_MAILER_PATH', `/usr/local/bin/dspam')dnl
dnl #define(`LOCAL_MAILER_ARGS', `dspam -t -Y -a $h "--deliver=innocent" --user
$u -d %u')dnl
MAILER(local)dnl
MAILER(smtp)dnl
MAILER(procmail)dnlinclude(`/usr/local/src/sendmail-8.13.4/cf/m4/cf.m4')dnl
VERSIONID(`setup for Red Hat Linux')dnl
OSTYPE(`linux')dnl
dnl To be used for MTA-RX, the first MTA instance (receiving mail)
dnl Insert here the usual .mc preamble, including OSTYPE and DOMAIN calls.
dnl Specify here also access controls, relayable domains, anti-spam measures
dnl including milter settings if needed, mail submission settings, client
dnl authentication, resource controls, maximum mail size and header size,
dnl confMIN_FREE_BLOCKS, and other settings needed for receiving mail.
dnl
dnl NOTE:
dnl confMIN_FREE_BLOCKS at MTA-RX should be kept higher than the same
dnl setting at MTA-TX, to quench down clients when disk space is low,
dnl and not to stop processing the already received mail.
dnl
dnl In particular, here are some settings to be considered:
dnl ( see also http://www.sendmail.org/m4/anti_spam.html )
dnl
FEATURE(`access_db',`hash -T<TMPF> /etc/mail/access.db')dnl
dnl VIRTUSER_DOMAIN(`sub1.example.com')dnl list valid users here
dnl VIRTUSER_DOMAIN(`sub2.example.com')dnl list valid users here
FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl
FEATURE(`blacklist_recipients')dnl
dnl # define(`confMILTER_LOG_LEVEL', `9')dnl
dnl # define(`confMILTER_MACROS_HELO', confMILTER_MACROS_HELO`, {verify}')dnl
dnl # INPUT_MAIL_FILTER(`clamav', `S=local:/var/amavis/clmilter.sock, F=,
T=S:4m;R:4m')dnl
dnl # define(`confINPUT_MAIL_FILTERS', `clamav')dnl
define(`confAUTH_OPTIONS', `A p y')dnl
define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
TRUST_AUTH_MECH(`DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
dnl #
dnl # Rudimentary information on creating certificates for sendmail TLS:
dnl # make -C /usr/share/ssl/certs usage
dnl #
define(`confCACERT_PATH',`/etc/mail/certs')dnl
define(`confCACERT',`/etc/mail/certs/cacert.pem')dnl
define(`confSERVER_CERT',`/etc/mail/certs/sendmail.pem')dnl
define(`confSERVER_KEY',`/etc/mail/certs/sendmail.pem')dnl
define(`confCLIENT_CERT',`/etc/mail/certs/sendmail.pem')dnl
define(`confLOG_LEVEL', `14')dnl
define(`confPRIVACY_FLAGS', `noexpn,novrfy,authwarnings')dnl
define(`confDONT_PROBE_INTERFACES')dnl
undefine(`USE_CW_FILE')dnl
MASQUERADE_AS(itrc.ac.ir)
FEATURE(`allmasquerade')dnl
FEATURE(`masquerade_envelope')dnl
define(`confTO_IDENT', `0')dnl
define(`confMAX_MESSAGE_SIZE',`20485760')dnl
define(`confMAX_MIME_HEADER_LENGTH', `256/128')dnl
define(`confNO_RCPT_ACTION', `add-to-undisclosed')dnl
dnl # FEATURE(`nocanonify', ...)
dnl # define(`confBIND_OPTS', ...)
dnl # define(`confTO_RESOLVER_*... )
define(`confDELAY_LA', `8')dnl
define(`confREFUSE_LA', `12')dnl
define(`confMIN_FREE_BLOCKS', `10000')dnl
define(`confDEF_USER_ID', `8:12')dnl
define(`confRUN_AS_USER',`smmsp:smmsp')dnl
define(`confPID_FILE', `/var/run/sendmail-rx.pid')dnl
define(`STATUS_FILE', `/etc/mail/stat-rx')dnl
define(`QUEUE_DIR', `/var/spool/mqueue-rx')dnl
define(`confQUEUE_SORT_ORDER',`Time')dnl
dnl # Match the number of queue runners (R=) to the number of amavisd-new child
dnl processes ($max_servers). 2 to 7 OK, 10 is plenty, 20 is too many
QUEUE_GROUP(`mqueue', `P=/var/spool/mqueue-rx, R=2, F=f')dnl
FEATURE(stickyhost)dnl
define(`MAIL_HUB', `esmtp:[127.0.0.1]')dnl
define(`SMART_HOST',`esmtp:[127.0.0.1]')dnl
define(`confDELIVERY_MODE',`q')dnl
define(`ESMTP_MAILER_ARGS',`TCP $h 10024')dnl
MODIFY_MAILER_FLAGS(`ESMTP', `+z')dnl
define(`SMTP_MAILER_MAXMSGS',`10')dnl
define(`confTO_DATAFINAL',`20m')dnl
DAEMON_OPTIONS(`Name=MTA-RX')dnl
dnl Disable local delivery, as all local mail will go to MAIL_HUB
undefine(`ALIAS_FILE')dnl
define(`confFORWARD_PATH')dnl
FEATURE(`relay_entire_domain')dnl
undefine(`UUCP_RELAY')dnl
undefine(`BITNET_RELAY')dnl
undefine(`DECNET_RELAY')dnl
MAILER(smtp)
