Gary wrote: > Josh wrote:
>> Warning: I'm very new to Linux so hopefully the error I'm hitting is >> merely due to inexperience and not something more involved. >> Debian - current stable >> postfix - 2.1.5-9 >> amavisd-new - 20030616p10-5 >> spamassassin - 3.0.3-2 >> I'm setting up a Debian anti-spam, anti-virus gateway as described in >> the excellent walkthrough provided at www.freespamfilter.org. I've >> finished setting up postfix, amavisd-new, pyzor, razor, DCC and >> SpamAssassin. I have not yet set up ClamAV. At this point everything >> looks good running amavisd-new debug until I send in a test email. The >> mail hits the Debian box and makes it through various steps ok up >> until the MIME extraction section. Here are the relevant debug lines: >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) Extracting mime components >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) Issued a new file name: p001 >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) TROUBLE in check_mail: mime_decode-1 FAILED: write-open >> ../var/lib/amavis/amavis-20051011T113838-01102/parts/p001: No such >> file or directory at /usr/share/perl5/MIME/Body.pm line 414. >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) sending SMTP response: "451 4.5.0 Error in processing, >> id=01102-01, mime_decode-1 FAILED: write-open >> ../var/lib/amavis/amavis-20051011T113838-01102/parts/p001: No such >> file or directory at /usr/share/perl5/MIME/Body.pm line 414." >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) timer stopped after DATA end >> Oct 11 11:38:38 spambox.mydomain.com /usr/sbin/amavisd-new[1102]: >> (01102-01) PRESERVING EVIDENCE in >> ../var/lib/amavis/amavis-20051011T113838-01102 >> At someone's suggestion, I tried the following: >> amavisd-new stop >> apt-get --reinstall install libmime-perl >> chown -R amavis:amavis /var/lib/amavis >> chmod -R 0750 /var/lib/amavis >> amavisd-new start >> This had no effect - I still get the same error. >> Thanks for any help you can offer. http://marc.theaimsgroup.com/?l=amavis-user&m=108496949300770&w=2 Then again this link may not apply, since the problem line is: $IO = FileHandle->new(">$path") || die "write-open $path: $!"; Since this box is not in production, you might try stopping amavisd-new, removing any left over amavis-200510... temp directories and deleting any junk from the Postfix deferred queue, and trying again. 'postsuper -d ALL deferred' to clean up Postfix. Check amavisd.conf, make sure there is no typo here: $daemon_user = 'amavis'; $daemon_group = 'amavis'; (I know this setup uses 'amavis') BTW, I also had Josh do: mkdir /var/lib/amavis/tmp mkdir /var/lib/amavis/db mkdir /var/lib/amavis/var chown -R amavis:amavis /var/lib/amavis chmod -R 750 /var/lib/amavis I also know that Josh has sufficient ram for his configuration, so I am out of ideas. Gary V ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ AMaViS-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/amavis-user AMaViS-FAQ:http://www.amavis.org/amavis-faq.php3 AMaViS-HowTos:http://www.amavis.org/howto/
