Eric W. Bates wrote: > I have a mysterious problem. After upgrading amavisd-new to 2.6.2 on > FreeBSD (port version 2.6.2_3,1), it simply dies after about 20 seconds > with no errors or core dumps. > > I cranked the debug level up to 5 and sent it all to syslog. > > As far as I can tell, there is no way to run amavisd non-daemonized (in > the hopes of some non-logged output).
You could try running amavisd in debug mode to see if that outputs anything unusual to the screen: amavisd debug > I have tried it both with spamd running and not running (no change). If you are running amavisd-new, then you do not need to run spamd (and should not run it), as amavisd pre-loads spamassassin and its config files into memory at startup (see: http://www.ijs.si/software/amavisd/ for more details). Bill ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ AMaViS-user mailing list AMaViS-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amavis-user AMaViS-FAQ:http://www.amavis.org/amavis-faq.php3 AMaViS-HowTos:http://www.amavis.org/howto/
