[AMD Official Use Only - General] Hi Alex,
There are two places where VPE will lose power: When there is a system call to vpe_hw_fini(), and the vpe-thread finds that VEP has no jobs in the queue. This patch is to make sure that VPE is power up before loading firmware. Thanks, Peyton -----原始郵件----- 寄件者: Alex Deucher <[email protected]> 寄件日期: Wednesday, March 13, 2024 9:17 PM 收件者: Lee, Peyton <[email protected]> 副本: [email protected]; Deucher, Alexander <[email protected]>; Zhang, Yifan <[email protected]>; Ma, Li <[email protected]>; Yu, Lang <[email protected]> 主旨: Re: [PATCH] drm/amdgpu/vpe: power on vpe when hw_init On Wed, Mar 13, 2024 at 7:41 AM Peyton Lee <[email protected]> wrote: > > To fix mode2 reset failure. > Should power on VPE when hw_init. When does it get powered down again? Won't this leave it powered up? Alex > > Signed-off-by: Peyton Lee <[email protected]> > --- > drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > index 70c5cc80ecdc..ecfe0f36e83e 100644 > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c > @@ -396,6 +396,12 @@ static int vpe_hw_init(void *handle) > struct amdgpu_vpe *vpe = &adev->vpe; > int ret; > > + /* Power on VPE */ > + ret = amdgpu_device_ip_set_powergating_state(adev, > AMD_IP_BLOCK_TYPE_VPE, > + AMD_PG_STATE_UNGATE); > + if (ret) > + return ret; > + > ret = vpe_load_microcode(vpe); > if (ret) > return ret; > -- > 2.34.1 >
