On 02/05/2024 15:06, Kasiviswanathan, Harish wrote:
[AMD Official Use Only - General]
-----Original Message-----
From: amd-gfx <amd-gfx-boun...@lists.freedesktop.org> On Behalf Of Sharma,
Shashank
Sent: Thursday, May 2, 2024 1:32 AM
To: Alex Deucher <alexdeuc...@gmail.com>
Cc: amd-gfx@lists.freedesktop.org; Yadav, Arvind <arvind.ya...@amd.com>; Deucher, Alexander
<alexander.deuc...@amd.com>; Koenig, Christian <christian.koe...@amd.com>
Subject: Re: [PATCH v9 08/14] drm/amdgpu: map wptr BO into GART
On 01/05/2024 23:36, Alex Deucher wrote:
On Fri, Apr 26, 2024 at 9:57 AM Shashank Sharma <shashank.sha...@amd.com> wrote:
To support oversubscription, MES FW expects WPTR BOs to
be mapped into GART, before they are submitted to usermode
queues. This patch adds a function for the same.
V4: fix the wptr value before mapping lookup (Bas, Christian).
V5: Addressed review comments from Christian:
- Either pin object or allocate from GART, but not both.
- All the handling must be done with the VM locks held.
V7: Addressed review comments from Christian:
- Do not take vm->eviction_lock
- Use amdgpu_bo_gpu_offset to get the wptr_bo GPU offset
V8: Rebase
V9: Changed the function names from gfx_v11* to mes_v11*
Cc: Alex Deucher <alexander.deuc...@amd.com>
Cc: Christian Koenig <christian.koe...@amd.com>
Signed-off-by: Shashank Sharma <shashank.sha...@amd.com>
Signed-off-by: Arvind Yadav <arvind.ya...@amd.com>
---
.../gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c | 77 +++++++++++++++++++
.../gpu/drm/amd/include/amdgpu_userqueue.h | 1 +
2 files changed, 78 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c
b/drivers/gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c
index 8d2cd61af26b..37b80626e792 100644
--- a/drivers/gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c
+++ b/drivers/gpu/drm/amd/amdgpu/mes_v11_0_userqueue.c
@@ -30,6 +30,74 @@
#define AMDGPU_USERQ_PROC_CTX_SZ PAGE_SIZE
#define AMDGPU_USERQ_GANG_CTX_SZ PAGE_SIZE
+static int
+mes_v11_0_map_gtt_bo_to_gart(struct amdgpu_device *adev, struct amdgpu_bo *bo)
+{
+ int ret;
+
+ ret = amdgpu_bo_reserve(bo, true);
+ if (ret) {
+ DRM_ERROR("Failed to reserve bo. ret %d\n", ret);
+ goto err_reserve_bo_failed;
+ }
+
+ ret = amdgpu_ttm_alloc_gart(&bo->tbo);
+ if (ret) {
+ DRM_ERROR("Failed to bind bo to GART. ret %d\n", ret);
+ goto err_map_bo_gart_failed;
+ }
+
+ amdgpu_bo_unreserve(bo);
+ bo = amdgpu_bo_ref(bo);
+
+ return 0;
+
+err_map_bo_gart_failed:
+ amdgpu_bo_unreserve(bo);
+err_reserve_bo_failed:
+ return ret;
+}
+
There is a very similar function amdgpu_amdkfd_map_gtt_bo_to_gart(). Is it
possible to unify. Also, adev parameter in the above function is confusing.
This was also removed from amdgpu_amdkfd_map_gtt_bo_to_gart(). It looks like bo
is mapped to gart of adev, however it doesn't have to be. It is mapped to the
gart to which bo is associated.
I don't think unification makes much sense here, but I agree that adev
can be removed from the input args. I will update this.
- Shashank
+static int
+mes_v11_0_create_wptr_mapping(struct amdgpu_userq_mgr *uq_mgr,
+ struct amdgpu_usermode_queue *queue,
+ uint64_t wptr)
+{
+ struct amdgpu_device *adev = uq_mgr->adev;
+ struct amdgpu_bo_va_mapping *wptr_mapping;
+ struct amdgpu_vm *wptr_vm;
+ struct amdgpu_userq_obj *wptr_obj = &queue->wptr_obj;
+ int ret;
+
+ wptr_vm = queue->vm;
+ ret = amdgpu_bo_reserve(wptr_vm->root.bo, false);
+ if (ret)
+ return ret;
+
+ wptr &= AMDGPU_GMC_HOLE_MASK;
+ wptr_mapping = amdgpu_vm_bo_lookup_mapping(wptr_vm, wptr >> PAGE_SHIFT);
+ amdgpu_bo_unreserve(wptr_vm->root.bo);
+ if (!wptr_mapping) {
+ DRM_ERROR("Failed to lookup wptr bo\n");
+ return -EINVAL;
+ }
+
+ wptr_obj->obj = wptr_mapping->bo_va->base.bo;
+ if (wptr_obj->obj->tbo.base.size > PAGE_SIZE) {
+ DRM_ERROR("Requested GART mapping for wptr bo larger than one
page\n");
+ return -EINVAL;
+ }
+
+ ret = mes_v11_0_map_gtt_bo_to_gart(adev, wptr_obj->obj);
+ if (ret) {
+ DRM_ERROR("Failed to map wptr bo to GART\n");
+ return ret;
+ }
+
+ queue->wptr_obj.gpu_addr = amdgpu_bo_gpu_offset_no_check(wptr_obj->obj);
The wptr virtual address from the user may not be at offset 0 from the
start of the object. We should add the offset to the base vmid0 GPU
address.
can you please elaborate a bit here ? wptr_obj->obj is already mapped to
gart, do we still need this ?
- Shashank
Alex
+ return 0;
+}
+
static int mes_v11_0_userq_map(struct amdgpu_userq_mgr *uq_mgr,
struct amdgpu_usermode_queue *queue,
struct amdgpu_mqd_prop *userq_props)
@@ -61,6 +129,7 @@ static int mes_v11_0_userq_map(struct amdgpu_userq_mgr
*uq_mgr,
queue_input.queue_size = userq_props->queue_size >> 2;
queue_input.doorbell_offset = userq_props->doorbell_index;
queue_input.page_table_base_addr =
amdgpu_gmc_pd_addr(queue->vm->root.bo);
+ queue_input.wptr_mc_addr = queue->wptr_obj.gpu_addr;
amdgpu_mes_lock(&adev->mes);
r = adev->mes.funcs->add_hw_queue(&adev->mes, &queue_input);
@@ -187,6 +256,13 @@ static int mes_v11_0_userq_mqd_create(struct
amdgpu_userq_mgr *uq_mgr,
goto free_mqd;
}
+ /* FW expects WPTR BOs to be mapped into GART */
+ r = mes_v11_0_create_wptr_mapping(uq_mgr, queue,
userq_props->wptr_gpu_addr);
+ if (r) {
+ DRM_ERROR("Failed to create WPTR mapping\n");
+ goto free_ctx;
+ }
+
/* Map userqueue into FW using MES */
r = mes_v11_0_userq_map(uq_mgr, queue, userq_props);
if (r) {
@@ -216,6 +292,7 @@ mes_v11_0_userq_mqd_destroy(struct amdgpu_userq_mgr *uq_mgr,
struct amdgpu_usermode_queue *queue)
{
mes_v11_0_userq_unmap(uq_mgr, queue);
+ amdgpu_bo_unref(&queue->wptr_obj.obj);
amdgpu_userqueue_destroy_object(uq_mgr, &queue->fw_obj);
kfree(queue->userq_prop);
amdgpu_userqueue_destroy_object(uq_mgr, &queue->mqd);
diff --git a/drivers/gpu/drm/amd/include/amdgpu_userqueue.h
b/drivers/gpu/drm/amd/include/amdgpu_userqueue.h
index 643f31474bd8..ffe8a3d73756 100644
--- a/drivers/gpu/drm/amd/include/amdgpu_userqueue.h
+++ b/drivers/gpu/drm/amd/include/amdgpu_userqueue.h
@@ -45,6 +45,7 @@ struct amdgpu_usermode_queue {
struct amdgpu_vm *vm;
struct amdgpu_userq_obj mqd;
struct amdgpu_userq_obj fw_obj;
+ struct amdgpu_userq_obj wptr_obj;
};
struct amdgpu_userq_funcs {
--
2.43.2
