On 5/9/2025 3:04 PM, Jesse.Zhang wrote:
> From: Asad Kamal <[email protected]>
>
> This patch enables per-queue and per-pipe reset functionality for
> GFX IP v9.5.0 when using MEC firmware version 21 (0x15) or later.
>
> Changes include:
> 1. Added IP_VERSION(9,5,0) case in gfx_v9_4_3_sw_init() to enable
> per-queue and per-pipe reset flags when MEC FW >= 21
> 2. Extended pipe reset support check in gfx_v9_4_3_pipe_reset_support()
> to include GFX 9.5.0 with MEC FW >= 0x15 requirement
>
> Signed-off-by: Asad Kamal <[email protected]>
> Signed-off-by: Jesse Zhang <[email protected]>
> ---
> drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> index 9db2bde5c59d..a832639c07b8 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> @@ -1153,6 +1153,12 @@ static int gfx_v9_4_3_sw_init(struct amdgpu_ip_block
> *ip_block)
> adev->gfx.compute_supported_reset |=
> AMDGPU_RESET_TYPE_PER_PIPE;
> }
> break;
> + case IP_VERSION(9, 5, 0):
> + if (adev->gfx.mec_fw_version >= 21) {
> + adev->gfx.compute_supported_reset |=
> AMDGPU_RESET_TYPE_PER_QUEUE;
> + adev->gfx.compute_supported_reset |=
> AMDGPU_RESET_TYPE_PER_PIPE;
> + }
> + break;
> default:
> break;
> }
> @@ -3453,8 +3459,10 @@ static int gfx_v9_4_3_unmap_done(struct amdgpu_device
> *adev, uint32_t me,
> static bool gfx_v9_4_3_pipe_reset_support(struct amdgpu_device *adev)
> {
> /*TODO: Need check gfx9.4.4 mec fw whether supports pipe reset as
> well.*/
> - if (amdgpu_ip_version(adev, GC_HWIP, 0) == IP_VERSION(9, 4, 3) &&
> - adev->gfx.mec_fw_version >= 0x0000009b)
> + if ((amdgpu_ip_version(adev, GC_HWIP, 0) == IP_VERSION(9, 4, 3) &&
> + adev->gfx.mec_fw_version >= 0x0000009b) ||
> + (amdgpu_ip_version(adev, GC_HWIP, 0) == IP_VERSION(9,
> 5, 0) &&
> + adev->gfx.mec_fw_version >= 0x15))
I think this can be replaced with !!(adev->gfx.compute_supported_reset &
AMDGPU_RESET_TYPE_PER_PIPE).
Thanks,
Lijo
> return true;
> else
> dev_warn_once(adev->dev, "Please use the latest MEC version to
> see whether support pipe reset\n");