Fix double 'u' in 'frequuency'
Signed-off-by: Daniil Ryabov <[email protected]>
---
drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
index 681799468..d897f8a30 100644
--- a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
+++ b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c
@@ -1393,7 +1393,7 @@ static void calculate_bandwidth(
if
((bw_mtn(data->dram_speed_change_margin, bw_int_to_fixed(0)) &&
bw_ltn(data->dram_speed_change_margin, bw_int_to_fixed(9999)))) {
/*determine the minimum
dram clock change margin for each set of clock frequencies*/
data->min_dram_speed_change_margin[i][j] =
bw_min2(data->min_dram_speed_change_margin[i][j],
data->dram_speed_change_margin);
- /*compute the maximum
clock frequuency required for the dram clock change at each set of clock
frequencies*/
+ /*compute the maximum
clock frequency required for the dram clock change at each set of clock
frequencies*/
data->dispclk_required_for_dram_speed_change_pipe[i][j] =
bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k],
dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk),
(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k],
vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]),
data->dram_speed_change_line_source_transfer_time[k][i][j]))),
bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k],
dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk),
(bw_add(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k],
vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]),
data->dram_speed_change_line_source_transfer_time[k][i][j]),
data->active_time[k]))));
if
((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j],
vbios->high_voltage_max_dispclk))) {
data->display_pstate_change_enable[k] = 1;
@@ -1407,7 +1407,7 @@ static void calculate_bandwidth(
if
((bw_mtn(data->dram_speed_change_margin, bw_int_to_fixed(0)) &&
bw_ltn(data->dram_speed_change_margin, bw_int_to_fixed(9999)))) {
/*determine the minimum
dram clock change margin for each display pipe*/
data->min_dram_speed_change_margin[i][j] =
bw_min2(data->min_dram_speed_change_margin[i][j],
data->dram_speed_change_margin);
- /*compute the maximum
clock frequuency required for the dram clock change at each set of clock
frequencies*/
+ /*compute the maximum
clock frequency required for the dram clock change at each set of clock
frequencies*/
data->dispclk_required_for_dram_speed_change_pipe[i][j] =
bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k],
dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk),
(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k],
vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]),
data->dram_speed_change_line_source_transfer_time[k][i][j]),
data->mcifwr_burst_time[i][j]))),
bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k],
dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk),
(bw_add(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k],
vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]),
data->dram_speed_change_line_source_transfer_time[k][i][j]),
data->mcifwr_burst_time[i][j]), data->active_time[k]))));
if
((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j],
vbios->high_voltage_max_dispclk))) {
data->display_pstate_change_enable[k] = 1;
--
2.43.0
