On 2026. július 2., csütörtök 14:30:20 közép-európai nyári idő Christian König 
wrote:
> On 7/2/26 13:53, Timur Kristóf wrote:
> > On 2026. július 2., csütörtök 12:38:12 közép-európai nyári idő Christian
> > König> 
> > wrote:
> >> On 7/1/26 18:17, Timur Kristóf wrote:
> >>> The retry CAM can filter interrupts which occur repeatedly,
> >>> such as page fault interrupts when retry faults are enabled.
> >>> This makes processing those interrupts much more efficient,
> >>> because the CPU won't have to deal with processing the same
> >>> interrupt repeatedly.
> >>> 
> >>> Signed-off-by: Timur Kristóf <[email protected]>
> >>> ---
> >>> 
> >>>  drivers/gpu/drm/amd/amdgpu/ih_v7_0.c | 3 ++-
> >>>  1 file changed, 2 insertions(+), 1 deletion(-)
> >>> 
> >>> diff --git a/drivers/gpu/drm/amd/amdgpu/ih_v7_0.c
> >>> b/drivers/gpu/drm/amd/amdgpu/ih_v7_0.c index 291326d2ee8b..ec0919fa8254
> >>> 100644
> >>> --- a/drivers/gpu/drm/amd/amdgpu/ih_v7_0.c
> >>> +++ b/drivers/gpu/drm/amd/amdgpu/ih_v7_0.c
> >>> @@ -390,7 +390,8 @@ static int ih_v7_0_irq_init(struct amdgpu_device
> >>> *adev)
> >>> 
> >>>   pci_set_master(adev->pdev);
> >>> 
> >>> - if (amdgpu_ip_version(adev, OSSSYS_HWIP, 0) == IP_VERSION(7, 1,
> > 
> > 0)) {
> > 
> >>> + if (amdgpu_ip_version(adev, OSSSYS_HWIP, 0) == IP_VERSION(7, 1, 0)
> >>> 
> >>> +     !(adev->flags & AMD_IS_APU)) {
> >> 
> >> I think the check should be the other way around.
> >> 
> >> In other words we can enable the cam on dGPU or APUs with IP version 7.1
> >> because that one has the CAM as well.
> > 
> > What do you mean by the other way around?
> > 
> > The patch keeps pre-existing behaviour on IH 7.1 and additionally enables
> > the retry CAM on dGPUs. The patch makes no functional changes to IH 7.1,
> > on that version the retry CAM is always enabled regardless of whether
> > it's an APU or dGPU.
> 
> I just wanted to make the logic more readable. In other words:
> 
> if (!(adev->flags & AMD_IS_APU) ||
>     amdgpu_ip_version(adev, OSSSYS_HWIP, 0) == IP_VERSION(7, 1, 0))

Thanks, and sorry for the confusion.
I'll apply this suggestion to the next version of the series.

> 
> I still need to double check why we have the exception for OSSSYS 7.1.
> 
> Could be that this is for some MI* product, but I'm not 100% sure yet.

It was added in commit e06d19420118
I don't know which products have IH 7.1 because the IH block versions are not 
mentioned in the ASIC info table. I guess IH 7.1 goes with GFX 12.1 but I 
don't have any way to verify that guess.


> 
> >>>           /* Enable IH Retry CAM */
> >>>           tmp = RREG32_SOC15(OSSSYS, 0,
> > 
> > regIH_RETRY_INT_CAM_CNTL);
> > 
> >>>           tmp = REG_SET_FIELD(tmp, IH_RETRY_INT_CAM_CNTL, ENABLE,
> > 
> > 1);




Reply via email to