From: Austin Zheng <[email protected]>

[Why]
The n-1 UTM model has 8 SOC operating points. It sets
sop_count to 8 and fills sops[0] through sops[7]. Mode
support copies latency and available bandwidth from the v3
constraint for one point. That constraint was taken from the
alternate-pstate row, so its latency and urgent bandwidth
did not match the idle row.

[How]
This change does not write sop_count. The v3 table length
stays UTM_QOS_MODEL_V3_MAX_SOP_COUNT, which is 5.
dcn6_v3_sop_table_get_sop_constraint_at_index() reads latency
from sops[IDLE][index]. dml2_utm_soc_bb_dcn6_v3_build_sop_table()
stores that row's urgent_bandwidth_KBps and
nominal_bandwidth_KBps as the minimum urgent and non-urgent
bandwidth. dcn6_v3_sop_table_is_bandwidth_supported_at_index()
still compares the highest alternate-pstate row as well.

Cc: Dillon Varone <[email protected]>
Signed-off-by: Austin Zheng <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
---
 .../dml2_utm_soc_bb/dml2_utm_soc_bb_dcn6.c    | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git 
a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_utm_soc_bb/dml2_utm_soc_bb_dcn6.c
 
b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_utm_soc_bb/dml2_utm_soc_bb_dcn6.c
index 586618d7dd58..7a1b2492969e 100644
--- 
a/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_utm_soc_bb/dml2_utm_soc_bb_dcn6.c
+++ 
b/drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_utm_soc_bb/dml2_utm_soc_bb_dcn6.c
@@ -157,8 +157,9 @@ static void 
dcn6_v3_sop_table_get_sop_constraint_at_index(const struct dml2_sop_
                unsigned int index, struct dml2_sop_constraint *constraint)
 {
        const struct utm_qos_model_dchub_v3 *dchub = table->model->dchub_v3;
+       // The mode support check is done based on the idle SOPs, not the 
active SOPs
        const struct utm_qos_model_dchub_v3_sop_entry *entry =
-                       
&dchub->sops[UTM_QOS_MODEL_V3_LOAD_LEVEL_ACTIVE_ALTERNATE_PSTATE][index];
+                       &dchub->sops[UTM_QOS_MODEL_V3_LOAD_LEVEL_IDLE][index];
 
        DML_ASSERT_MSG(index < dchub->sop_count, "unsupported sop index\n");
        constraint->dcn5.clocks.fclk_khz = 0;
@@ -174,6 +175,8 @@ static void 
dcn6_v3_sop_table_get_sop_constraint_at_index(const struct dml2_sop_
        constraint->dcn5.latency.dcn5.avg_req_latency_non_urg = 
entry->avg_req_latency_non_urg_ps / 1000000.0;
        constraint->dcn5.latency.dcn5.df_response_time_us = 
entry->df_response_time_ps / 1000000.0;
        constraint->dcn5.min_available_urgent_bandwidth_KBps = 
table->sop_min_available_urgent_bandwidths_KBps[index];
+       // non urgent bandwidth needs to be plumbed for presentation in the 
spreadsheet
+       constraint->dcn5.min_available_non_urgent_bandwidth_KBps = 
table->sop_min_available_non_urgent_bandwidths_KBps[index];
        constraint->dcn5.min_sop_index = index;
 }
 
@@ -267,14 +270,18 @@ static void 
dml2_utm_soc_bb_dcn6_v3_build_sop_table(struct dml2_sop_table *table
 
        for (i = 0; i < dchub->sop_count; i++) {
                const struct utm_qos_model_dchub_v3_sop_entry *idle_entry =
-                               
&dchub->sops[UTM_QOS_MODEL_V3_LOAD_LEVEL_IDLE][i];
-               const struct utm_qos_model_dchub_v3_sop_entry *active_entry =
-                               
&dchub->sops[UTM_QOS_MODEL_V3_LOAD_LEVEL_ACTIVE_ALTERNATE_PSTATE][i];
+                       &dchub->sops[UTM_QOS_MODEL_V3_LOAD_LEVEL_IDLE][i];
 
                table->sop_optimal_dcfclks_khz[i] =
-                               
dcn6_v3_sop_table_calculate_optimal_dcfclk_khz(utm_soc_bb, idle_entry);
+                       
dcn6_v3_sop_table_calculate_optimal_dcfclk_khz(utm_soc_bb, idle_entry);
+               // The mode support check is done based on the idle SOPs, not 
the active SOPs
                table->sop_min_available_urgent_bandwidths_KBps[i] =
-                               active_entry->urgent_bandwidth_KBps;
+                       idle_entry->urgent_bandwidth_KBps;
+               // non urgent bandwidth needs to be plumbed for presentation in 
the spreadsheet
+               table->sop_min_available_non_urgent_bandwidths_KBps[i] =
+                       idle_entry->nominal_bandwidth_KBps;
+               // TODO - remove min_available_urgent_bandwidth_KBps and move 
stutter efficiency calculation to populate informative.
+
        }
 }
 
-- 
2.43.0

Reply via email to