On 01/02/18 01:36 PM, Deucher, Alexander wrote:
Are there any displays attached to the secondary card with the mclks
stuck high? If not, does attaching a display help?
Stealing the display from my primary (CZ in this case) does help, and
then putting it back the MCLK remains low.
Tom
Alex
------------------------------------------------------------------------
*From:* amd-gfx <amd-gfx-boun...@lists.freedesktop.org> on behalf of Tom
St Denis <tom.stde...@amd.com>
*Sent:* Thursday, February 1, 2018 1:14:43 PM
*To:* amd-gfx mailing list
*Cc:* Zhu, Rex
*Subject:* MCLK defaults high on second card
Hi,
I have a setup with a CZ + Polaris10 and on the Polaris10 the SCLK idles
low and the MCLK stays in the 2nd state (1750MHz) but on my Workstation
which has a single 560 in it the card idles at 300MHz (with the stock
FC27 kernel).
Is there an issue with non-primary cards idling properly?
Doing
echo 0 > /sys/devices/pci0000:00/0000:00:03.1/0000:21:00.0/pp_dpm_mclk
Doesn't result in low clock rates either.
Tom
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
