Vega20 supports only sclk voltage overdrive. And user can
only tell three groups of <frequency, voltage_offset>. SMU
firmware will recalculate the frequency/voltage curve. Other
intermediate levles will be stretched/shrunk accordingly.
Change-Id: I403cb38a95863db664cf06d030ac42a19bff6b33
Signed-off-by: Evan Quan <evan.q...@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 26 +++
.../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 165 +++++++++++++++++-
.../drm/amd/powerplay/hwmgr/vega20_hwmgr.h | 2 +
3 files changed, 192 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index e2577518b9c6..6e0c8f583521 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -474,6 +474,8 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
* in each power level within a power state. The pp_od_clk_voltage is used for
* this.
*
+ * < For Vega10 and previous ASICs >
+ *
* Reading the file will display:
*
* - a list of engine clock levels and voltages labeled OD_SCLK
@@ -491,6 +493,30 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
* "c" (commit) to the file to commit your changes. If you want to reset to
the
* default power levels, write "r" (reset) to the file to reset them.
*
+ *
+ * < For Vega20 >
+ *
+ * Reading the file will display:
+ *
+ * - three groups of engine clock and voltage offset labeled OD_SCLK
+ *
+ * - a list of valid ranges for above three groups of sclk and voltage offset
+ * labeled OD_RANGE
+ *
+ * To manually adjust these settings:
+ *
+ * - First select manual using power_dpm_force_performance_level
+ *
+ * - Enter a new value for each group by writing a string that contains
+ * "s group_index clock voltage_offset" to the file. E.g., "s 0 500 20"
+ * will update group1 sclk to be 500 MHz with voltage increased 20mV
+ *
+ * - When you have edited all of the states as needed, write "c" (commit)
+ * to the file to commit your changes
+ *
+ * - If you want to reset to the default power levels, write "r" (reset)
+ * to the file to reset them
+ *
*/
static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index ececa2f7fe5f..9f6e070a76e0 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -1096,6 +1096,13 @@ static int vega20_od8_initialize_default_settings(
}
}
+ ret = vega20_copy_table_from_smc(hwmgr,
+ (uint8_t *)(&data->od_table),
+ TABLE_OVERDRIVE);
+ PP_ASSERT_WITH_CODE(!ret,
+ "Failed to export over drive table!",
+ return ret);
+
return 0;
}
@@ -2506,11 +2513,112 @@ static int
vega20_set_watermarks_for_clocks_ranges(struct pp_hwmgr *hwmgr,
return 0;
}
+static int vega20_odn_edit_dpm_table(struct pp_hwmgr *hwmgr,
+ enum PP_OD_DPM_TABLE_COMMAND type,
+ long *input, uint32_t size)
+{
+ struct vega20_hwmgr *data =
+ (struct vega20_hwmgr *)(hwmgr->backend);
+ struct vega20_od8_single_setting *od8_settings =
+ data->od8_settings.od8_settings_array;
+ OverDriveTable_t od_table;
+ int32_t input_index, input_clk, input_vol, i;
+ int ret = 0;
+
+ PP_ASSERT_WITH_CODE(input, "NULL user input for clock and voltage",
+ return -EINVAL);
+
+ switch (type) {
+ case PP_OD_EDIT_SCLK_VDDC_TABLE:
+ if (!(od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id)) {
+ pr_info("Sclk voltage overdrive not supported\n");
+ return 0;
+ }
+
+ for (i = 0; i < size; i += 3) {
+ if (i + 3 > size) {
+ pr_info("invalid clock voltage input\n");
+ return 0;
+ }
+
+ input_index = input[i];
+ input_clk = input[i + 1];
+ input_vol = input[i + 2];
+ if (input_index > 2 ||
+ input_clk < od8_settings[OD8_SETTING_GFXCLK_FREQ1 +
input_index * 2].min_value ||
+ input_clk > od8_settings[OD8_SETTING_GFXCLK_FREQ1 +
input_index * 2].max_value ||
+ input_vol <
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1 + input_index * 2].min_value ||
+ input_vol >
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1 + input_index * 2].max_value) {
+ pr_info("input argument is not within allowed
range\n");
+ return -EINVAL;
+ }
+
+ switch (input_index) {
+ case 0:
+ data->od_table.GfxclkFreq1 = input_clk;
+ data->od_table.GfxclkOffsetVolt1 = input_vol;
+ break;
+ case 1:
+ data->od_table.GfxclkFreq2 = input_clk;
+ data->od_table.GfxclkOffsetVolt2 = input_vol;
+ break;
+ case 2:
+ data->od_table.GfxclkFreq3 = input_clk;
+ data->od_table.GfxclkOffsetVolt3 = input_vol;
+ break;
+ }
+ }
+ break;
+
+ case PP_OD_EDIT_MCLK_VDDC_TABLE:
+ pr_info("Mclk voltage overdrive not supported!\n");
+ break;
+
+ case PP_OD_RESTORE_DEFAULT_TABLE:
+ ret = vega20_copy_table_from_smc(hwmgr,
+ (uint8_t *)(&od_table),
+ TABLE_OVERDRIVE);
+ PP_ASSERT_WITH_CODE(!ret,
+ "Failed to export over drive table!",
+ return ret);
+
+ memcpy(&data->od_table, &od_table, sizeof(od_table));
+ break;
+
+ case PP_OD_COMMIT_DPM_TABLE:
+ memcpy(&od_table, &data->od_table, sizeof(od_table));
+
+ ret = vega20_copy_table_to_smc(hwmgr,
+ (uint8_t *)(&od_table),
+ TABLE_OVERDRIVE);
+ PP_ASSERT_WITH_CODE(!ret,
+ "Failed to import over drive table!",
+ return ret);
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int vega20_print_clock_levels(struct pp_hwmgr *hwmgr,
enum pp_clock_type type, char *buf)
{
- int i, now, size = 0;
+ struct vega20_hwmgr *data =
+ (struct vega20_hwmgr *)(hwmgr->backend);
+ struct vega20_od8_single_setting *od8_settings =
+ data->od8_settings.od8_settings_array;
+ OverDriveTable_t *od_table = &data->od_table;
struct pp_clock_levels_with_latency clocks;
+ int i, now, size = 0;
int ret = 0;
switch (type) {
@@ -2551,6 +2659,59 @@ static int vega20_print_clock_levels(struct pp_hwmgr
*hwmgr,
case PP_PCIE:
break;
+ case OD_SCLK:
+ if (od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id) {
+
+ size = sprintf(buf, "%s:\n", "OD_SCLK");
+ size += sprintf(buf + size, "0: %10uMhz %10dmV\n",
+ od_table->GfxclkFreq1,
+ od_table->GfxclkOffsetVolt1);
+ size += sprintf(buf + size, "1: %10uMhz %10dmV\n",
+ od_table->GfxclkFreq2,
+ od_table->GfxclkOffsetVolt2);
+ size += sprintf(buf + size, "2: %10uMhz %10dmV\n",
+ od_table->GfxclkFreq3,
+ od_table->GfxclkOffsetVolt3);
+ }
+ break;
+
+ case OD_MCLK:
+ break;
+
+ case OD_RANGE:
+ if (od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id &&
+ od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id) {
+
+ size = sprintf(buf, "%s:\n", "OD_RANGE");
+ size += sprintf(buf + size, "SCLK[0]: %7uMhz %10uMhz\n",
+
od8_settings[OD8_SETTING_GFXCLK_FREQ1].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_FREQ1].max_value);
+ size += sprintf(buf + size, "VDDC[0]: %7dmV %11dmV\n",
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].max_value);
+ size += sprintf(buf + size, "SCLK[1]: %7uMhz %10uMhz\n",
+
od8_settings[OD8_SETTING_GFXCLK_FREQ2].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_FREQ2].max_value);
+ size += sprintf(buf + size, "VDDC[1]: %7dmV %11dmV\n",
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].max_value);
+ size += sprintf(buf + size, "SCLK[2]: %7uMhz %10uMhz\n",
+
od8_settings[OD8_SETTING_GFXCLK_FREQ3].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_FREQ3].max_value);
+ size += sprintf(buf + size, "VDDC[2]: %7dmV %11dmV\n",
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].min_value,
+
od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].max_value);
+ }
+ break;
default:
break;
}
@@ -3162,6 +3323,8 @@ static const struct pp_hwmgr_func vega20_hwmgr_funcs = {
vega20_get_mclk_od,
.set_mclk_od =
vega20_set_mclk_od,
+ .odn_edit_dpm_table =
+ vega20_odn_edit_dpm_table,
/* for sysfs to retrive/set gfxclk/memclk */
.force_clock_level =
vega20_force_clock_level,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
index 72e4f2a55641..8bb90e22efb6 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
@@ -513,6 +513,8 @@ struct vega20_hwmgr {
/* ---- Gfxoff ---- */
bool gfxoff_allowed;
uint32_t counter_gfxoff;
+
+ OverDriveTable_t od_table;
};
#define VEGA20_DPM2_NEAR_TDP_DEC 10
--
2.18.0
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
