From: Anthony Koo <anthony....@amd.com>
[Why]
More clearly isolate the code that is involved in programming of
vupdate interrupt
[How]
Add function for programming of vupdate interrupt.
Call it after timing is programmed.
Change-Id: Ib05c77800300d5f9bfb43ecfb7b4f2b615778ab5
Signed-off-by: Anthony Koo <anthony....@amd.com>
Reviewed-by: Aric Cyr <aric....@amd.com>
Acked-by: Bhawanpreet Lakha <bhawanpreet.la...@amd.com>
Acked-by: Tony Cheng <tony.ch...@amd.com>
---
.../display/dc/dce110/dce110_hw_sequencer.c | 5 ++
.../gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 51 +++++++++++++++----
.../amd/display/dc/inc/hw/timing_generator.h | 3 ++
3 files changed, 48 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index db0ef41eb91c..774c51c2d039 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1341,6 +1341,11 @@ static enum dc_status apply_single_controller_ctx_to_hw(
/* */
dc->hwss.enable_stream_timing(pipe_ctx, context, dc);
+ if (pipe_ctx->stream_res.tg->funcs->program_vupdate_interrupt)
+ pipe_ctx->stream_res.tg->funcs->program_vupdate_interrupt(
+ pipe_ctx->stream_res.tg,
+ &stream->timing);
+
if (pipe_ctx->stream->signal != SIGNAL_TYPE_VIRTUAL)
pipe_ctx->stream_res.stream_enc->funcs->dig_connect_to_otg(
pipe_ctx->stream_res.stream_enc,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
index 51c98e99237e..1dbd1d3999e6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
@@ -186,6 +186,42 @@ void optc1_program_vline_interrupt(
}
}
+void optc1_program_vupdate_interrupt(
+ struct timing_generator *optc,
+ const struct dc_crtc_timing *dc_crtc_timing)
+{
+ struct optc *optc1 = DCN10TG_FROM_TG(optc);
+ int32_t vertical_line_start;
+ uint32_t asic_blank_end;
+ uint32_t vesa_sync_start;
+ struct dc_crtc_timing patched_crtc_timing;
+
+ patched_crtc_timing = *dc_crtc_timing;
+ optc1_apply_front_porch_workaround(optc, &patched_crtc_timing);
+
+ /* asic_h_blank_end = HsyncWidth + HbackPorch =
+ * vesa. usHorizontalTotal - vesa. usHorizontalSyncStart -
+ * vesa.h_left_border
+ */
+ vesa_sync_start = patched_crtc_timing.h_addressable +
+ patched_crtc_timing.h_border_right +
+ patched_crtc_timing.h_front_porch;
+
+ asic_blank_end = patched_crtc_timing.h_total -
+ vesa_sync_start -
+ patched_crtc_timing.h_border_left;
+
+ /* Use OTG_VERTICAL_INTERRUPT2 replace VUPDATE interrupt,
+ * program the reg for interrupt postition.
+ */
+ vertical_line_start = asic_blank_end -
optc->dlg_otg_param.vstartup_start + 1;
+ if (vertical_line_start < 0)
+ vertical_line_start = 0;
+
+ REG_SET(OTG_VERTICAL_INTERRUPT2_POSITION, 0,
+ OTG_VERTICAL_INTERRUPT2_LINE_START,
vertical_line_start);
+}
+
/**
* program_timing_generator used by mode timing set
* Program CRTC Timing Registers - OTG_H_*, OTG_V_*, Pixel repetition.
@@ -288,22 +324,14 @@ void optc1_program_timing(
patched_crtc_timing.v_addressable +
patched_crtc_timing.v_border_bottom);
- REG_UPDATE_2(OTG_V_BLANK_START_END,
- OTG_V_BLANK_START, asic_blank_start,
- OTG_V_BLANK_END, asic_blank_end);
-
- /* Use OTG_VERTICAL_INTERRUPT2 replace VUPDATE interrupt,
- * program the reg for interrupt postition.
- */
vertical_line_start = asic_blank_end -
optc->dlg_otg_param.vstartup_start + 1;
v_fp2 = 0;
if (vertical_line_start < 0)
v_fp2 = -vertical_line_start;
- if (vertical_line_start < 0)
- vertical_line_start = 0;
- REG_SET(OTG_VERTICAL_INTERRUPT2_POSITION, 0,
- OTG_VERTICAL_INTERRUPT2_LINE_START,
vertical_line_start);
+ REG_UPDATE_2(OTG_V_BLANK_START_END,
+ OTG_V_BLANK_START, asic_blank_start,
+ OTG_V_BLANK_END, asic_blank_end);
/* v_sync polarity */
v_sync_polarity = patched_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ?
@@ -1453,6 +1481,7 @@ static const struct timing_generator_funcs dcn10_tg_funcs
= {
.validate_timing = optc1_validate_timing,
.program_timing = optc1_program_timing,
.program_vline_interrupt = optc1_program_vline_interrupt,
+ .program_vupdate_interrupt = optc1_program_vupdate_interrupt,
.program_global_sync = optc1_program_global_sync,
.enable_crtc = optc1_enable_crtc,
.disable_crtc = optc1_disable_crtc,
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 5d6cca7826f3..03ae941895f3 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -154,6 +154,9 @@ struct timing_generator_funcs {
const struct dc_crtc_timing *dc_crtc_timing,
enum vline_select vline,
const union vline_config *vline_config);
+
+ void (*program_vupdate_interrupt)(struct timing_generator *optc,
+ const struct dc_crtc_timing *dc_crtc_timing);
bool (*enable_crtc)(struct timing_generator *tg);
bool (*disable_crtc)(struct timing_generator *tg);
bool (*is_counter_moving)(struct timing_generator *tg);
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
