On Mon, Feb 11, 2019 at 4:01 PM Kazlauskas, Nicholas
<nicholas.kazlaus...@amd.com> wrote:
>
> On 2/11/19 3:35 AM, Daniel Vetter wrote:
> > On Mon, Feb 11, 2019 at 04:22:24AM +0100, Mario Kleiner wrote:
> >> The pageflip completion timestamps transmitted to userspace
> >> via pageflip completion events are supposed to describe the
> >> time at which the first pixel of the new post-pageflip scanout
> >> buffer leaves the video output of the gpu. This time is
> >> identical to end of vblank, when active scanout starts.
> >>
> >> For a crtc in standard fixed refresh rate, the end of vblank
> >> is identical to the vblank timestamps calculated by
> >> drm_update_vblank_count() at each vblank interrupt, or each
> >> vblank dis-/enable. Therefore pageflip events just carry
> >> that vblank timestamp as their pageflip timestamp.
> >>
> >> For a crtc switched to variable refresh rate mode (vrr), the
> >> pageflip completion timestamps are identical to the vblank
> >> timestamps iff the pageflip was executed early in vblank,
> >> before the minimum vblank duration elapsed. In this case
> >> the time of display onset is identical to when the crtc
> >> is running in fixed refresh rate.
> >>
> >> However, if a pageflip completes later in the vblank, inside
> >> the "extended front porch" in vrr mode, then the vblank will
> >> terminate at a fixed (back porch) duration after flip, so
> >> the display onset time is delayed correspondingly. In this
> >> case the vblank timestamp computed at vblank irq time would
> >> be too early, and we need a way to calculate an estimated
> >> pageflip timestamp that will be later than the vblank timestamp.
> >>
> >> How a driver determines such a "late flip" timestamp is hw
> >> and driver specific, but this patch adds a new helper function
> >> that allows the driver to propose such an alternate "late flip"
> >> timestamp for use in pageflip events:
> >>
> >> drm_crtc_set_vrr_pageflip_timestamp(crtc, flip_timestamp);
> >>
> >> When sending out pageflip events, we now compare that proposed
> >> flip_timestamp against the vblank timestamp of the current
> >> vblank of flip completion and choose to send out the greater/
> >> later timestamp as flip completion timestamp.
> >>
> >> The most simple way for a kms driver to supply a suitable
> >> flip_timestamp in vrr mode would be to simply take a timestamp
> >> at start of the pageflip completion handler, e.g., pageflip
> >> irq handler: flip_timestamp = ktime_get(); and then set that
> >> as proposed "late" alternative timestamp via ...
> >> drm_crtc_set_vrr_pageflip_timestamp(crtc, flip_timestamp);
> >>
> >> More clever approaches could try to add some corrective offset
> >> for fixed back porch duration, or ideally use hardware features
> >> like hw timestamps to calculate the exact end time of vblank.
> >>
> >> Signed-off-by: Mario Kleiner <mario.kleiner...@gmail.com>
> >> Cc: Nicholas Kazlauskas <nicholas.kazlaus...@amd.com>
> >> Cc: Harry Wentland <harry.wentl...@amd.com>
> >> Cc: Alex Deucher <alexander.deuc...@amd.com>
> >
> > Uh, this looks like a pretty bad hack. Can't we fix amdgpu to only give us
> > the right timestampe, once? With this I guess if you do a vblank query in
> > between the wrong and the right vblank you'll get the bogus value. Not
> > really great for userspace.
> > -Daniel
>
> I think we calculate the timestamp and send the vblank event both within
> the pageflip IRQ handler so calculating the right pageflip timestamp
> once could probably be done. I'm not sure if it's easier than proposing
> a later flip time with an API like this though.
>
> The actual scanout time should be known from the page-flip handler so
> the semantics for VRR on/off remain the same. This is because the
> page-flip triggers entering the back porch if we're in the extended
> front porch.
>
> But scanout time from vblank events for something like
> DRM_IOCTL_WAIT_VBLANK are going to be wrong in most cases and are only
> treated as estimates. If we're in the regular front porch then the
> timing to scanout is based on the fixed duration front porch for the
> current mode. If we're in the extended back porch then it's technically
> driver defined but the most reasonable guess is to assume that the front
> porch is going to end at any moment, so just return the length of the
> back porch for getting the scanout time.
>
> Proposing the late timestamp shouldn't affect vblank event in the
> DRM_IOCTL_WAIT_VBLANK case and should only be used in the page-flip
> event case. I'm not sure if that's what's guaranteed to happen with this
> patch though. There doesn't seem to be any locking on either
> dev->vblank_time_lock or the vblank->seqlock so while it's likely to get
> the same vblank event back as the one just stored I don't think it's
> guaranteed.

That's the inconsistency I mean to highlight - the timestamp for the
same frame as observed through flip complete and through the
wait_vblank ioctl can differ. Which they really shouldn't.

Now added complication is that amdgpu sends out vblank events really
early, which is used by userspace to do frontbuffer rendering in the
vblank time. But I don't think anyone wants to do both VRR and
frontbuffer rendering, hence I think it should be possible to create
correct vblank timestamps for the VRR case, while leaving the current
logic in place for everything else. But that means moving the entire
vblank processing to where you know the next frame's start time for
VRR, both for page flips and for all other vblank events.
-Daniel

>
> Nicholas Kazlauskas
>
> >
> >> ---
> >>   drivers/gpu/drm/drm_vblank.c | 49 +++++++++++++++++++++++++++++++++++-
> >>   include/drm/drm_vblank.h     |  8 ++++++
> >>   2 files changed, 56 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> >> index 98e091175921..4b3a4c38fabe 100644
> >> --- a/drivers/gpu/drm/drm_vblank.c
> >> +++ b/drivers/gpu/drm/drm_vblank.c
> >> @@ -814,10 +814,21 @@ static void send_vblank_event(struct drm_device *dev,
> >>              u64 seq, ktime_t now)
> >>   {
> >>      struct timespec64 tv;
> >> +    ktime_t alt_flip_time;
> >>
> >>      switch (e->event.base.type) {
> >> -    case DRM_EVENT_VBLANK:
> >>      case DRM_EVENT_FLIP_COMPLETE:
> >> +            /*
> >> +             * For flip completion events, override "now" time
> >> +             * with alt_flip_time provided by the driver via
> >> +             * drm_crtc_set_vrr_pageflip_timestamp() in VRR mode
> >> +             * if that time is later than given "now" vblank time.
> >> +             */
> >> +            alt_flip_time = dev->vblank[e->pipe].alt_flip_time;
> >> +            if (alt_flip_time > now)
> >> +                    now = alt_flip_time;
> >> +            /* Fallthrough */
> >> +    case DRM_EVENT_VBLANK:
> >>              tv = ktime_to_timespec64(now);
> >>              e->event.vbl.sequence = seq;
> >>              /*
> >> @@ -916,11 +927,47 @@ void drm_crtc_send_vblank_event(struct drm_crtc 
> >> *crtc,
> >>
> >>              now = ktime_get();
> >>      }
> >> +
> >>      e->pipe = pipe;
> >>      send_vblank_event(dev, e, seq, now);
> >>   }
> >>   EXPORT_SYMBOL(drm_crtc_send_vblank_event);
> >>
> >> +/**
> >> + * drm_crtc_set_vrr_pageflip_timestamp - helper to set alternate pageflip 
> >> time
> >> + * @crtc: the source CRTC of the pageflip completion event
> >> + * @flip_time: The alternate pageflip completion timestamp in VRR mode
> >> + *
> >> + * In variable refresh rate mode (VRR), a pageflip completion timestamp 
> >> carried
> >> + * by the pageflip event can never be earlier than the vblank timestamp 
> >> of the
> >> + * vblank of flip completion, as that vblank timestamp defines the end of 
> >> the
> >> + * shortest possible vblank duration. In case of a delayed flip completion
> >> + * inside the extended VRR front porch however, the end of vblank can be 
> >> much
> >> + * later, so the driver must assign an estimated timestamp of that later 
> >> end of
> >> + * vblank. For a CRTC in VRR mode, the driver should use this helper 
> >> function to
> >> + * set an alternate flip completion timestamp in case of late flip 
> >> completions
> >> + * in extended vblank. In the most simple case, this @flip_time timestamp 
> >> could
> >> + * simply be a ktime_get() timestamp taken at the start of the pageflip
> >> + * completion routine, with some constant duration of the back porch 
> >> interval
> >> + * added, although more precise estimates may be possible on some 
> >> hardware if
> >> + * the hardware provides some means of timestamping the true end of 
> >> vblank.
> >> + *
> >> + * When sending out pageflip events, e.g., via 
> >> drm_crtc_send_vblank_event(), it
> >> + * will use either the standard vblank timestamp, calculated for a minimum
> >> + * duration vblank, or the provided @flip_time if that time is later than 
> >> the
> >> + * vblank timestamp, to get the best possible estimate of start of 
> >> display of
> >> + * the new post-pageflip scanout buffer.
> >> + */
> >> +void drm_crtc_set_vrr_pageflip_timestamp(struct drm_crtc *crtc,
> >> +                                     ktime_t flip_time)
> >> +{
> >> +    struct drm_device *dev = crtc->dev;
> >> +    struct drm_vblank_crtc *vblank = &dev->vblank[drm_crtc_index(crtc)];
> >> +
> >> +    vblank->alt_flip_time = flip_time;
> >> +}
> >> +EXPORT_SYMBOL(drm_crtc_set_vrr_pageflip_timestamp);
> >> +
> >>   static int __enable_vblank(struct drm_device *dev, unsigned int pipe)
> >>   {
> >>      if (drm_core_check_feature(dev, DRIVER_MODESET)) {
> >> diff --git a/include/drm/drm_vblank.h b/include/drm/drm_vblank.h
> >> index 6ad9630d4f48..aacf44694ab6 100644
> >> --- a/include/drm/drm_vblank.h
> >> +++ b/include/drm/drm_vblank.h
> >> @@ -117,6 +117,12 @@ struct drm_vblank_crtc {
> >>       * @time: Vblank timestamp corresponding to @count.
> >>       */
> >>      ktime_t time;
> >> +    /**
> >> +     * @alt_flip_time: Vblank timestamp for end of extended vblank due to
> >> +     * a late pageflip completion in variable refresh rate mode. Pageflip
> >> +     * events will carry the later one of @time and @alt_flip_time.
> >> +     */
> >> +    ktime_t alt_flip_time;
> >>
> >>      /**
> >>       * @refcount: Number of users/waiters of the vblank interrupt. Only 
> >> when
> >> @@ -179,6 +185,8 @@ int drm_vblank_init(struct drm_device *dev, unsigned 
> >> int num_crtcs);
> >>   u64 drm_crtc_vblank_count(struct drm_crtc *crtc);
> >>   u64 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc,
> >>                                 ktime_t *vblanktime);
> >> +void drm_crtc_set_vrr_pageflip_timestamp(struct drm_crtc *crtc,
> >> +                                     ktime_t flip_time);
> >>   void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
> >>                             struct drm_pending_vblank_event *e);
> >>   void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
> >> --
> >> 2.17.1
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-de...@lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
>


-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Reply via email to