Allow changing to the CUSTOM profile without requiring the parameters being passed in each time. Store the values in the smu7_profiling table since it's defined here anyways
v2: Add check that CUSTOM was previously set Change-Id: I6c5e3a1487e12410a6a7670a5cf1a6599253344d Signed-off-by: Kent Russell <[email protected]> --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 32 ++++++++++++------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 83d3d935f3ac..048757e8f494 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -77,7 +77,7 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) -static const struct profile_mode_setting smu7_profiling[7] = +static struct profile_mode_setting smu7_profiling[7] = {{0, 0, 0, 0, 0, 0, 0, 0}, {1, 0, 100, 30, 1, 0, 100, 10}, {1, 10, 0, 30, 0, 0, 0, 0}, @@ -4984,17 +4984,27 @@ static int smu7_set_power_profile_mode(struct pp_hwmgr *hwmgr, long *input, uint mode = input[size]; switch (mode) { case PP_SMC_POWER_PROFILE_CUSTOM: - if (size < 8) + if (size < 8 && size != 0) return -EINVAL; - - tmp.bupdate_sclk = input[0]; - tmp.sclk_up_hyst = input[1]; - tmp.sclk_down_hyst = input[2]; - tmp.sclk_activity = input[3]; - tmp.bupdate_mclk = input[4]; - tmp.mclk_up_hyst = input[5]; - tmp.mclk_down_hyst = input[6]; - tmp.mclk_activity = input[7]; + /* If only CUSTOM is passed in, use the saved values. Check + * that we actually have a CUSTOM profile by ensuring that + * the "use sclk" or the "use mclk" bits are set + */ + tmp = smu7_profiling[PP_SMC_POWER_PROFILE_CUSTOM]; + if (size == 0) { + if (tmp.bupdate_sclk == 0 && tmp.bupdate_mclk == 0) + return -EINVAL; + } else { + tmp.bupdate_sclk = input[0]; + tmp.sclk_up_hyst = input[1]; + tmp.sclk_down_hyst = input[2]; + tmp.sclk_activity = input[3]; + tmp.bupdate_mclk = input[4]; + tmp.mclk_up_hyst = input[5]; + tmp.mclk_down_hyst = input[6]; + tmp.mclk_activity = input[7]; + smu7_profiling[PP_SMC_POWER_PROFILE_CUSTOM] = tmp; + } if (!smum_update_dpm_settings(hwmgr, &tmp)) { memcpy(&data->current_profile_setting, &tmp, sizeof(struct profile_mode_setting)); hwmgr->power_profile_mode = mode; -- 2.17.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
