Reviewed-by: Evan Quan <[email protected]> > -----Original Message----- > From: Kenneth Feng <[email protected]> > Sent: Thursday, January 9, 2020 3:13 PM > To: [email protected] > Cc: Quan, Evan <[email protected]>; Feng, Kenneth > <[email protected]> > Subject: [PATCH v2] drm/amd/powerplay: sw ctf for arcturus > > change the sw ctf setting to smu_v11_0_set_thermal_range() > since software_shutdown_temp shares the same definition and > name in all the smu11 project. > > Signed-off-by: Kenneth Feng <[email protected]> > --- > drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c > b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c > index e804f98..76bddd5 100644 > --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c > +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c > @@ -1154,11 +1154,12 @@ static int smu_v11_0_set_thermal_range(struct > smu_context *smu, > int low = SMU_THERMAL_MINIMUM_ALERT_TEMP; > int high = SMU_THERMAL_MAXIMUM_ALERT_TEMP; > uint32_t val; > + struct smu_table_context *table_context = &smu->smu_table; > + struct smu_11_0_powerplay_table *powerplay_table = table_context- > >power_play_table; > > low = max(SMU_THERMAL_MINIMUM_ALERT_TEMP, > range.min / > SMU_TEMPERATURE_UNITS_PER_CENTIGRADES); > - high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP, > - range.max / > SMU_TEMPERATURE_UNITS_PER_CENTIGRADES); > + high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP, > powerplay_table->software_shutdown_temp); > > if (low > high) > return -EINVAL; > -- > 2.7.4
_______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
