From: "Tianci.Yin" <tianci....@amd.com>
[why]
CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there
is no use case.
[how]
Disable 3D pipe 1 on Navi1x.
Change-Id: I6898bdfe31d4e7908bd9bcfa82b6a75e118e8727
Reviewed-by: Hawking Zhang <hawking.zh...@amd.com>
Signed-off-by: Tianci.Yin <tianci....@amd.com>
---
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 97 ++++++++++++++------------
1 file changed, 51 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 760fe2ebe799..f348512eb8c3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -52,7 +52,7 @@
* 1. Primary ring
* 2. Async ring
*/
-#define GFX10_NUM_GFX_RINGS 2
+#define GFX10_NUM_GFX_RINGS_NV1X 1
#define GFX10_MEC_HPD_SIZE 2048
#define F32_CE_PROGRAM_RAM_SIZE 65536
@@ -1305,7 +1305,7 @@ static int gfx_v10_0_sw_init(void *handle)
case CHIP_NAVI14:
case CHIP_NAVI12:
adev->gfx.me.num_me = 1;
- adev->gfx.me.num_pipe_per_me = 2;
+ adev->gfx.me.num_pipe_per_me = 1;
adev->gfx.me.num_queue_per_pipe = 1;
adev->gfx.mec.num_mec = 2;
adev->gfx.mec.num_pipe_per_mec = 4;
@@ -2711,18 +2711,20 @@ static int gfx_v10_0_cp_gfx_start(struct amdgpu_device
*adev)
amdgpu_ring_commit(ring);
/* submit cs packet to copy state 0 to next available state */
- ring = &adev->gfx.gfx_ring[1];
- r = amdgpu_ring_alloc(ring, 2);
- if (r) {
- DRM_ERROR("amdgpu: cp failed to lock ring (%d).\n", r);
- return r;
- }
-
- amdgpu_ring_write(ring, PACKET3(PACKET3_CLEAR_STATE, 0));
- amdgpu_ring_write(ring, 0);
+ if (adev->gfx.num_gfx_rings > 1) {
+ /* maximum supported gfx ring is 2 */
+ ring = &adev->gfx.gfx_ring[1];
+ r = amdgpu_ring_alloc(ring, 2);
+ if (r) {
+ DRM_ERROR("amdgpu: cp failed to lock ring (%d).\n", r);
+ return r;
+ }
- amdgpu_ring_commit(ring);
+ amdgpu_ring_write(ring, PACKET3(PACKET3_CLEAR_STATE, 0));
+ amdgpu_ring_write(ring, 0);
+ amdgpu_ring_commit(ring);
+ }
return 0;
}
@@ -2819,39 +2821,41 @@ static int gfx_v10_0_cp_gfx_resume(struct amdgpu_device
*adev)
mutex_unlock(&adev->srbm_mutex);
/* Init gfx ring 1 for pipe 1 */
- mutex_lock(&adev->srbm_mutex);
- gfx_v10_0_cp_gfx_switch_pipe(adev, PIPE_ID1);
- ring = &adev->gfx.gfx_ring[1];
- rb_bufsz = order_base_2(ring->ring_size / 8);
- tmp = REG_SET_FIELD(0, CP_RB1_CNTL, RB_BUFSZ, rb_bufsz);
- tmp = REG_SET_FIELD(tmp, CP_RB1_CNTL, RB_BLKSZ, rb_bufsz - 2);
- WREG32_SOC15(GC, 0, mmCP_RB1_CNTL, tmp);
- /* Initialize the ring buffer's write pointers */
- ring->wptr = 0;
- WREG32_SOC15(GC, 0, mmCP_RB1_WPTR, lower_32_bits(ring->wptr));
- WREG32_SOC15(GC, 0, mmCP_RB1_WPTR_HI, upper_32_bits(ring->wptr));
- /* Set the wb address wether it's enabled or not */
- rptr_addr = adev->wb.gpu_addr + (ring->rptr_offs * 4);
- WREG32_SOC15(GC, 0, mmCP_RB1_RPTR_ADDR, lower_32_bits(rptr_addr));
- WREG32_SOC15(GC, 0, mmCP_RB1_RPTR_ADDR_HI, upper_32_bits(rptr_addr) &
- CP_RB1_RPTR_ADDR_HI__RB_RPTR_ADDR_HI_MASK);
- wptr_gpu_addr = adev->wb.gpu_addr + (ring->wptr_offs * 4);
- WREG32_SOC15(GC, 0, mmCP_RB_WPTR_POLL_ADDR_LO,
- lower_32_bits(wptr_gpu_addr));
- WREG32_SOC15(GC, 0, mmCP_RB_WPTR_POLL_ADDR_HI,
- upper_32_bits(wptr_gpu_addr));
-
- mdelay(1);
- WREG32_SOC15(GC, 0, mmCP_RB1_CNTL, tmp);
-
- rb_addr = ring->gpu_addr >> 8;
- WREG32_SOC15(GC, 0, mmCP_RB1_BASE, rb_addr);
- WREG32_SOC15(GC, 0, mmCP_RB1_BASE_HI, upper_32_bits(rb_addr));
- WREG32_SOC15(GC, 0, mmCP_RB1_ACTIVE, 1);
-
- gfx_v10_0_cp_gfx_set_doorbell(adev, ring);
- mutex_unlock(&adev->srbm_mutex);
-
+ if (adev->gfx.num_gfx_rings > 1) {
+ mutex_lock(&adev->srbm_mutex);
+ gfx_v10_0_cp_gfx_switch_pipe(adev, PIPE_ID1);
+ /* maximum supported gfx ring is 2 */
+ ring = &adev->gfx.gfx_ring[1];
+ rb_bufsz = order_base_2(ring->ring_size / 8);
+ tmp = REG_SET_FIELD(0, CP_RB1_CNTL, RB_BUFSZ, rb_bufsz);
+ tmp = REG_SET_FIELD(tmp, CP_RB1_CNTL, RB_BLKSZ, rb_bufsz - 2);
+ WREG32_SOC15(GC, 0, mmCP_RB1_CNTL, tmp);
+ /* Initialize the ring buffer's write pointers */
+ ring->wptr = 0;
+ WREG32_SOC15(GC, 0, mmCP_RB1_WPTR, lower_32_bits(ring->wptr));
+ WREG32_SOC15(GC, 0, mmCP_RB1_WPTR_HI,
upper_32_bits(ring->wptr));
+ /* Set the wb address wether it's enabled or not */
+ rptr_addr = adev->wb.gpu_addr + (ring->rptr_offs * 4);
+ WREG32_SOC15(GC, 0, mmCP_RB1_RPTR_ADDR,
lower_32_bits(rptr_addr));
+ WREG32_SOC15(GC, 0, mmCP_RB1_RPTR_ADDR_HI,
upper_32_bits(rptr_addr) &
+ CP_RB1_RPTR_ADDR_HI__RB_RPTR_ADDR_HI_MASK);
+ wptr_gpu_addr = adev->wb.gpu_addr + (ring->wptr_offs * 4);
+ WREG32_SOC15(GC, 0, mmCP_RB_WPTR_POLL_ADDR_LO,
+ lower_32_bits(wptr_gpu_addr));
+ WREG32_SOC15(GC, 0, mmCP_RB_WPTR_POLL_ADDR_HI,
+ upper_32_bits(wptr_gpu_addr));
+
+ mdelay(1);
+ WREG32_SOC15(GC, 0, mmCP_RB1_CNTL, tmp);
+
+ rb_addr = ring->gpu_addr >> 8;
+ WREG32_SOC15(GC, 0, mmCP_RB1_BASE, rb_addr);
+ WREG32_SOC15(GC, 0, mmCP_RB1_BASE_HI, upper_32_bits(rb_addr));
+ WREG32_SOC15(GC, 0, mmCP_RB1_ACTIVE, 1);
+
+ gfx_v10_0_cp_gfx_set_doorbell(adev, ring);
+ mutex_unlock(&adev->srbm_mutex);
+ }
/* Switch to pipe 0 */
mutex_lock(&adev->srbm_mutex);
gfx_v10_0_cp_gfx_switch_pipe(adev, PIPE_ID0);
@@ -3967,7 +3971,8 @@ static int gfx_v10_0_early_init(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- adev->gfx.num_gfx_rings = GFX10_NUM_GFX_RINGS;
+ adev->gfx.num_gfx_rings = GFX10_NUM_GFX_RINGS_NV1X;
+
adev->gfx.num_compute_rings = AMDGPU_MAX_COMPUTE_RINGS;
gfx_v10_0_set_kiq_pm4_funcs(adev);
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
