Enable SMU i2c bus access for sienna_cichlid asics.
v2: change callback name
Signed-off-by: Alex Deucher <alexander.deuc...@amd.com>
---
.../drm/amd/powerplay/sienna_cichlid_ppt.c | 239 ++++++++++++++++++
1 file changed, 239 insertions(+)
diff --git a/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
b/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
index 5faef41b63a3..2438751359e7 100644
--- a/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
@@ -23,6 +23,7 @@
#include <linux/firmware.h>
#include <linux/pci.h>
+#include <linux/i2c.h>
#include "amdgpu.h"
#include "amdgpu_smu.h"
#include "smu_internal.h"
@@ -52,6 +53,8 @@
#undef pr_info
#undef pr_debug
+#define to_amdgpu_device(x) (container_of(x, struct amdgpu_device, pm.smu_i2c))
+
#define FEATURE_MASK(feature) (1ULL << feature)
#define SMC_DPM_FEATURE ( \
FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) | \
@@ -455,6 +458,8 @@ static int sienna_cichlid_tables_init(struct smu_context
*smu, struct smu_table
PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_t),
PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
+ SMU_TABLE_INIT(tables, SMU_TABLE_I2C_COMMANDS, sizeof(SwI2cRequest_t),
+ PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
SMU_TABLE_INIT(tables, SMU_TABLE_OVERDRIVE, sizeof(OverDriveTable_t),
PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
SMU_TABLE_INIT(tables, SMU_TABLE_PMSTATUSLOG, SMU11_TOOL_SIZE,
@@ -2487,6 +2492,238 @@ static void sienna_cichlid_dump_pptable(struct
smu_context *smu)
dev_info(smu->adev->dev, "MmHubPadding[7] = 0x%x\n",
pptable->MmHubPadding[7]);
}
+static void sienna_cichlid_fill_i2c_req(SwI2cRequest_t *req, bool write,
+ uint8_t address, uint32_t numbytes,
+ uint8_t *data)
+{
+ int i;
+
+ BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);
+
+ req->I2CcontrollerPort = 0;
+ req->I2CSpeed = 2;
+ req->SlaveAddress = address;
+ req->NumCmds = numbytes;
+
+ for (i = 0; i < numbytes; i++) {
+ SwI2cCmd_t *cmd = &req->SwI2cCmds[i];
+
+ /* First 2 bytes are always write for lower 2b EEPROM address */
+ if (i < 2)
+ cmd->CmdConfig = CMDCONFIG_READWRITE_MASK;
+ else
+ cmd->CmdConfig = write ? CMDCONFIG_READWRITE_MASK : 0;
+
+
+ /* Add RESTART for read after address filled */
+ cmd->CmdConfig |= (i == 2 && !write) ? CMDCONFIG_RESTART_MASK :
0;
+
+ /* Add STOP in the end */
+ cmd->CmdConfig |= (i == (numbytes - 1)) ? CMDCONFIG_STOP_MASK :
0;
+
+ /* Fill with data regardless if read or write to simplify code
*/
+ cmd->ReadWriteData = data[i];
+ }
+}
+
+static int sienna_cichlid_i2c_read_data(struct i2c_adapter *control,
+ uint8_t address,
+ uint8_t *data,
+ uint32_t numbytes)
+{
+ uint32_t i, ret = 0;
+ SwI2cRequest_t req;
+ struct amdgpu_device *adev = to_amdgpu_device(control);
+ struct smu_table_context *smu_table = &adev->smu.smu_table;
+ struct smu_table *table = &smu_table->driver_table;
+
+ memset(&req, 0, sizeof(req));
+ sienna_cichlid_fill_i2c_req(&req, false, address, numbytes, data);
+
+ mutex_lock(&adev->smu.mutex);
+ /* Now read data starting with that address */
+ ret = smu_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req,
+ true);
+ mutex_unlock(&adev->smu.mutex);
+
+ if (!ret) {
+ SwI2cRequest_t *res = (SwI2cRequest_t *)table->cpu_addr;
+
+ /* Assume SMU fills res.SwI2cCmds[i].Data with read bytes */
+ for (i = 0; i < numbytes; i++)
+ data[i] = res->SwI2cCmds[i].ReadWriteData;
+
+ dev_dbg(adev->dev, "sienna_cichlid_i2c_read_data, address = %x,
bytes = %d, data :",
+ (uint16_t)address, numbytes);
+
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
+ 8, 1, data, numbytes, false);
+ } else
+ dev_err(adev->dev, "sienna_cichlid_i2c_read_data - error
occurred :%x", ret);
+
+ return ret;
+}
+
+static int sienna_cichlid_i2c_write_data(struct i2c_adapter *control,
+ uint8_t address,
+ uint8_t *data,
+ uint32_t numbytes)
+{
+ uint32_t ret;
+ SwI2cRequest_t req;
+ struct amdgpu_device *adev = to_amdgpu_device(control);
+
+ memset(&req, 0, sizeof(req));
+ sienna_cichlid_fill_i2c_req(&req, true, address, numbytes, data);
+
+ mutex_lock(&adev->smu.mutex);
+ ret = smu_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req,
true);
+ mutex_unlock(&adev->smu.mutex);
+
+ if (!ret) {
+ dev_dbg(adev->dev, "sienna_cichlid_i2c_write(), address = %x,
bytes = %d , data: ",
+ (uint16_t)address, numbytes);
+
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
+ 8, 1, data, numbytes, false);
+ /*
+ * According to EEPROM spec there is a MAX of 10 ms required for
+ * EEPROM to flush internal RX buffer after STOP was issued at
the
+ * end of write transaction. During this time the EEPROM will
not be
+ * responsive to any more commands - so wait a bit more.
+ */
+ msleep(10);
+
+ } else
+ dev_err(adev->dev, "sienna_cichlid_i2c_write- error occurred
:%x", ret);
+
+ return ret;
+}
+
+static int sienna_cichlid_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msgs, int num)
+{
+ uint32_t i, j, ret, data_size, data_chunk_size, next_eeprom_addr = 0;
+ uint8_t *data_ptr, data_chunk[MAX_SW_I2C_COMMANDS] = { 0 };
+
+ for (i = 0; i < num; i++) {
+ /*
+ * SMU interface allows at most MAX_SW_I2C_COMMANDS bytes of
data at
+ * once and hence the data needs to be spliced into chunks and
sent each
+ * chunk separately
+ */
+ data_size = msgs[i].len - 2;
+ data_chunk_size = MAX_SW_I2C_COMMANDS - 2;
+ next_eeprom_addr = (msgs[i].buf[0] << 8 & 0xff00) |
(msgs[i].buf[1] & 0xff);
+ data_ptr = msgs[i].buf + 2;
+
+ for (j = 0; j < data_size / data_chunk_size; j++) {
+ /* Insert the EEPROM dest addess, bits 0-15 */
+ data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
+ data_chunk[1] = (next_eeprom_addr & 0xff);
+
+ if (msgs[i].flags & I2C_M_RD) {
+ ret = sienna_cichlid_i2c_read_data(i2c_adap,
+
(uint8_t)msgs[i].addr,
+ data_chunk,
MAX_SW_I2C_COMMANDS);
+
+ memcpy(data_ptr, data_chunk + 2,
data_chunk_size);
+ } else {
+
+ memcpy(data_chunk + 2, data_ptr,
data_chunk_size);
+
+ ret = sienna_cichlid_i2c_write_data(i2c_adap,
+
(uint8_t)msgs[i].addr,
+ data_chunk,
MAX_SW_I2C_COMMANDS);
+ }
+
+ if (ret) {
+ num = -EIO;
+ goto fail;
+ }
+
+ next_eeprom_addr += data_chunk_size;
+ data_ptr += data_chunk_size;
+ }
+
+ if (data_size % data_chunk_size) {
+ data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
+ data_chunk[1] = (next_eeprom_addr & 0xff);
+
+ if (msgs[i].flags & I2C_M_RD) {
+ ret = sienna_cichlid_i2c_read_data(i2c_adap,
+
(uint8_t)msgs[i].addr,
+ data_chunk,
(data_size % data_chunk_size) + 2);
+
+ memcpy(data_ptr, data_chunk + 2, data_size %
data_chunk_size);
+ } else {
+ memcpy(data_chunk + 2, data_ptr, data_size %
data_chunk_size);
+
+ ret = sienna_cichlid_i2c_write_data(i2c_adap,
+
(uint8_t)msgs[i].addr,
+ data_chunk,
(data_size % data_chunk_size) + 2);
+ }
+
+ if (ret) {
+ num = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+fail:
+ return num;
+}
+
+static u32 sienna_cichlid_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+
+static const struct i2c_algorithm sienna_cichlid_i2c_algo = {
+ .master_xfer = sienna_cichlid_i2c_xfer,
+ .functionality = sienna_cichlid_i2c_func,
+};
+
+static bool sienna_cichlid_i2c_adapter_is_added(struct i2c_adapter *control)
+{
+ struct amdgpu_device *adev = to_amdgpu_device(control);
+
+ return control->dev.parent == &adev->pdev->dev;
+}
+
+static int sienna_cichlid_i2c_control_init(struct smu_context *smu, struct
i2c_adapter *control)
+{
+ struct amdgpu_device *adev = to_amdgpu_device(control);
+ int res;
+
+ /* smu_i2c_eeprom_init may be called twice in sriov */
+ if (sienna_cichlid_i2c_adapter_is_added(control))
+ return 0;
+
+ control->owner = THIS_MODULE;
+ control->class = I2C_CLASS_SPD;
+ control->dev.parent = &adev->pdev->dev;
+ control->algo = &sienna_cichlid_i2c_algo;
+ snprintf(control->name, sizeof(control->name), "AMDGPU SMU");
+
+ res = i2c_add_adapter(control);
+ if (res)
+ DRM_ERROR("Failed to register hw i2c, err: %d\n", res);
+
+ return res;
+}
+
+static void sienna_cichlid_i2c_control_fini(struct smu_context *smu, struct
i2c_adapter *control)
+{
+ if (!sienna_cichlid_i2c_adapter_is_added(control))
+ return;
+
+ i2c_del_adapter(control);
+}
+
+
static const struct pptable_funcs sienna_cichlid_ppt_funcs = {
.tables_init = sienna_cichlid_tables_init,
.alloc_dpm_context = sienna_cichlid_allocate_dpm_context,
@@ -2500,6 +2737,8 @@ static const struct pptable_funcs
sienna_cichlid_ppt_funcs = {
.set_default_dpm_table = sienna_cichlid_set_default_dpm_table,
.dpm_set_vcn_enable = sienna_cichlid_dpm_set_vcn_enable,
.dpm_set_jpeg_enable = sienna_cichlid_dpm_set_jpeg_enable,
+ .i2c_init = sienna_cichlid_i2c_control_init,
+ .i2c_fini = sienna_cichlid_i2c_control_fini,
.print_clk_levels = sienna_cichlid_print_clk_levels,
.force_clk_levels = sienna_cichlid_force_clk_levels,
.populate_umd_state_clk = sienna_cichlid_populate_umd_state_clk,
--
2.25.4
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
