On 1/19/21 11:39 AM, Chen, Horace wrote:

[AMD Official Use Only - Internal Distribution Only]


Hi Andrey,

I think the list in the XGMI hive won't be break in the middle if we lock the device before we change the list. Because if 2 devices in 1 hive went into the function, it will follow the same sequence to lock the devices. So one of them will definately break at the first device. I add iterate devices here is just to lock all device in the hive since we will change the device sequence in the hive soon after.


I didn't mean break in a sense of breaking the list itself, I just meant the literal 'break' instruction
to terminate the iteration once you failed to lock a particular device.



The reason to break the interation in the middle is that the list is changed during the iteration without taking any lock. It is quite bad since I'm fixing one of this issue. And for XGMI hive, there are 2 locks protecting the list, one is the device lock I changed here, the other one is in front of my change, there is a hive->lock to protect the hive.

Even the bad thing really happened, I think moving back through the list is also very dengerous since we don't know what the list finally be, Unless we stack the devices we have iterated through a mirrored list. That can be a big change.


Not sure we are on the same page, my concern is let's sat your XGMI hive consists of 2 devices, you manged to call successfully do amdgpu_device_lock_adev for dev1 but then failed for dev2, in this case you will bail out without releasing dev1, no ?


Andrey




I'm ok to seperate the locking in amdgpu_device_lock_adev here, I'll do some test and update the code later.

Thanks & Regards,
Horace.
--------------------------------------------------------------------------------
*发件人:* Grodzovsky, Andrey <andrey.grodzov...@amd.com>
*发送时间:* 2021年1月19日 22:33
*收件人:* Chen, Horace <horace.c...@amd.com>; amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org> *抄送:* Quan, Evan <evan.q...@amd.com>; Tuikov, Luben <luben.tui...@amd.com>; Koenig, Christian <christian.koe...@amd.com>; Deucher, Alexander <alexander.deuc...@amd.com>; Xiao, Jack <jack.x...@amd.com>; Zhang, Hawking <hawking.zh...@amd.com>; Liu, Monk <monk....@amd.com>; Xu, Feifei <feifei...@amd.com>; Wang, Kevin(Yang) <kevin1.w...@amd.com>; Xiaojie Yuan <xiaojie.y...@amd.com>
*主题:* Re: [PATCH 1/2] drm/amdgpu: race issue when jobs on 2 ring timeout

On 1/19/21 7:22 AM, Horace Chen wrote:
> Fix a racing issue when jobs on 2 rings timeout simultaneously.
>
> If 2 rings timed out at the same time, the amdgpu_device_gpu_recover
> will be reentered. Then the adev->gmc.xgmi.head will be grabbed
> by 2 local linked list, which may cause wild pointer issue in
> iterating.
>
> lock the device earily to prevent the node be added to 2 different
> lists.
>
> Signed-off-by: Horace Chen <horace.c...@amd.com>
> ---
>   drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 42 +++++++++++++++-------
>   1 file changed, 30 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index 4d434803fb49..9574da3abc32 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -4540,6 +4540,7 @@ int amdgpu_device_gpu_recover(struct amdgpu_device 
*adev,
>        int i, r = 0;
>        bool need_emergency_restart = false;
>        bool audio_suspended = false;
> +     bool get_dev_lock = false;
>
>        /*
>         * Special case: RAS triggered and full reset isn't supported
> @@ -4582,28 +4583,45 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
>         * Build list of devices to reset.
>         * In case we are in XGMI hive mode, resort the device list
>         * to put adev in the 1st position.
> +      *
> +      * lock the device before we try to operate the linked list
> +      * if didn't get the device lock, don't touch the linked list since
> +      * others may iterating it.
>         */
>        INIT_LIST_HEAD(&device_list);
>        if (adev->gmc.xgmi.num_physical_nodes > 1) {
>                if (!hive)
>                        return -ENODEV;
> -             if (!list_is_first(&adev->gmc.xgmi.head, &hive->device_list))
> - list_rotate_to_front(&adev->gmc.xgmi.head, &hive->device_list);
> -             device_list_handle = &hive->device_list;
> +
> +             list_for_each_entry(tmp_adev, &hive->device_list, 
gmc.xgmi.head) {
> +                     get_dev_lock = amdgpu_device_lock_adev(tmp_adev, hive);
> +                     if (!get_dev_lock)
> +                             break;


What about unlocking back all the devices you already locked if the break
happens in the middle of the iteration ?
Note that at skip_recovery: we don't do it. BTW, i see this issue is already in
the current code.

Also, maybe now it's better to separate the actual locking in
amdgpu_device_lock_adev
from the other stuff going on there since I don't think you would wont to toggle
stuff
like adev->mp1_state back and forth and also the function name is not
descriptive of
the other stuff going on there anyway.

Andrey


> +             }
> +             if (get_dev_lock) {
> +                     if (!list_is_first(&adev->gmc.xgmi.head, &hive->device_list))
> + list_rotate_to_front(&adev->gmc.xgmi.head, &hive->device_list);
> +                     device_list_handle = &hive->device_list;
> +             }
>        } else {
> - list_add_tail(&adev->gmc.xgmi.head, &device_list);
> -             device_list_handle = &device_list;
> +             get_dev_lock = amdgpu_device_lock_adev(adev, hive);
> +             tmp_adev = adev;
> +             if (get_dev_lock) {
> + list_add_tail(&adev->gmc.xgmi.head, &device_list);
> +                     device_list_handle = &device_list;
> +             }
> +     }
> +
> +     if (!get_dev_lock) {
> +             dev_info(tmp_adev->dev, "Bailing on TDR for s_job:%llx, as another already in progress",
> +                                     job ? job->base.id : -1);
> +             r = 0;
> +             /* even we skipped this reset, still need to set the job to guilty */
> +             goto skip_recovery;
>        }
>
>        /* block all schedulers and reset given job's ring */
>        list_for_each_entry(tmp_adev, device_list_handle, gmc.xgmi.head) {
> -             if (!amdgpu_device_lock_adev(tmp_adev, hive)) {
> -                     dev_info(tmp_adev->dev, "Bailing on TDR for s_job:%llx, as another already in progress",
> -                               job ? job->base.id : -1);
> -                     r = 0;
> -                     goto skip_recovery;
> -             }
> -
>                /*
>                 * Try to put the audio codec into suspend state
>                 * before gpu reset started.
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Reply via email to