Read buffers no longer expose the I2C address, and so we don't need to
offset by two when we get the read data.

Cc: Alex Deucher <[email protected]>
Cc: Kent Russell <[email protected]>
Cc: Andrey Grodzovsky <[email protected]>
Fixes: bd607166af7fe3 ("drm/amdgpu: Enable reading FRU chip via I2C v3")
Signed-off-by: Luben Tuikov <[email protected]>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c 
b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
index 792337433a9ee5..61c4e71e399855 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
@@ -103,17 +103,13 @@ static int amdgpu_fru_read_eeprom(struct amdgpu_device 
*adev, uint32_t addrptr,
 
 int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
 {
-       unsigned char buf[AMDGPU_PRODUCT_NAME_LEN+2];
+       unsigned char buf[AMDGPU_PRODUCT_NAME_LEN];
        u32 addrptr;
        int size, len;
-       int offset = 2;
 
        if (!is_fru_eeprom_supported(adev))
                return 0;
 
-       if (adev->asic_type == CHIP_ALDEBARAN)
-               offset = 0;
-
        /* If algo exists, it means that the i2c_adapter's initialized */
        if (!adev->pm.fru_eeprom_i2c_bus || !adev->pm.fru_eeprom_i2c_bus->algo) 
{
                DRM_WARN("Cannot access FRU, EEPROM accessor not initialized");
@@ -155,8 +151,7 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
                                AMDGPU_PRODUCT_NAME_LEN);
                len = AMDGPU_PRODUCT_NAME_LEN - 1;
        }
-       /* Start at 2 due to buf using fields 0 and 1 for the address */
-       memcpy(adev->product_name, &buf[offset], len);
+       memcpy(adev->product_name, buf, len);
        adev->product_name[len] = '\0';
 
        addrptr += size + 1;
@@ -174,7 +169,7 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
                DRM_WARN("FRU Product Number is larger than 16 characters. This 
is likely a mistake");
                len = sizeof(adev->product_number) - 1;
        }
-       memcpy(adev->product_number, &buf[offset], len);
+       memcpy(adev->product_number, buf, len);
        adev->product_number[len] = '\0';
 
        addrptr += size + 1;
@@ -201,7 +196,7 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
                DRM_WARN("FRU Serial Number is larger than 16 characters. This 
is likely a mistake");
                len = sizeof(adev->serial) - 1;
        }
-       memcpy(adev->serial, &buf[offset], len);
+       memcpy(adev->serial, buf, len);
        adev->serial[len] = '\0';
 
        return 0;
-- 
2.35.0.3.gb23dac905b

Reply via email to