[AMD Official Use Only - General]
Hi Leo,
Sorry, need to correct the commit message, it is unpasue, during unloading
driver, I haven't seen any place call un-pause dpg for vcn4.0 for hw fini. And
it will report "[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value
>0x00000001 != 0x00000000n ", and with adding calling un-pause dpg, then issue
>disappears.
Best wishes
Emily Deng
>-----Original Message-----
>From: Liu, Leo <leo....@amd.com>
>Sent: Monday, June 19, 2023 9:27 PM
>To: Deng, Emily <emily.d...@amd.com>; amd-gfx@lists.freedesktop.org
>Cc: Deng, Emily <emily.d...@amd.com>
>Subject: RE: [PATCH] drm/amdgpu/vcn: Need to pause dpg before stop dpg
>
>[AMD Official Use Only - General]
>
>Hi Emily,
>
>Do you want to pause or un-pause dpg mode based on and change and commit
>message?
>
>With bare metal, before calling the stop, the state of dpg should be un-paused
>within the call the of amdgpu_vcn_idle_work_handler, is it not the case for
>SRIOV?
>
>Regards,
>Leo
>
>
>-----Original Message-----
>From: amd-gfx <amd-gfx-boun...@lists.freedesktop.org> On Behalf Of Emily
>Deng
>Sent: Monday, June 19, 2023 6:24 AM
>To: amd-gfx@lists.freedesktop.org
>Cc: Deng, Emily <emily.d...@amd.com>
>Subject: [PATCH] drm/amdgpu/vcn: Need to pause dpg before stop dpg
>
>Need to pause dpg first, or it will hit follow error during stop dpg:
>"[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value
>0x00000001 != 0x00000000n"
>
>Signed-off-by: Emily Deng <emily.d...@amd.com>
>---
> drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c
>b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c
>index b48bb5212488..259795098173 100644
>--- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c
>+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c
>@@ -1424,8 +1424,10 @@ static int vcn_v4_0_start_sriov(struct
>amdgpu_device *adev)
> */
> static void vcn_v4_0_stop_dpg_mode(struct amdgpu_device *adev, int
>inst_idx) {
>+ struct dpg_pause_state state = {.fw_based =
>VCN_DPG_STATE__UNPAUSE};
> uint32_t tmp;
>
>+ vcn_v4_0_pause_dpg_mode(adev, inst_idx, &state);
> /* Wait for power status to be 1 */
> SOC15_WAIT_ON_RREG(VCN, inst_idx, regUVD_POWER_STATUS, 1,
> UVD_POWER_STATUS__UVD_POWER_STATUS_MASK);
>--
>2.36.1
>
