From: Swapnil Patel <swapnil.pa...@amd.com>
[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.
[How]
Only check DCN registers if we aren't using AUX based brightness control.
Reviewed-by: Wenjing Liu <wenjing....@amd.com>
Acked-by: Stylon Wang <stylon.w...@amd.com>
Signed-off-by: Swapnil Patel <swapnil.pa...@amd.com>
---
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 602fb149dc10..31454db00ed5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -964,7 +964,9 @@ void dce110_edp_backlight_control(
return;
}
- if (link->panel_cntl) {
+ if (link->panel_cntl && !(link->dpcd_sink_ext_caps.bits.oled ||
+ link->dpcd_sink_ext_caps.bits.hdr_aux_backlight_control == 1 ||
+ link->dpcd_sink_ext_caps.bits.sdr_aux_backlight_control == 1)) {
bool is_backlight_on =
link->panel_cntl->funcs->is_panel_backlight_on(link->panel_cntl);
if ((enable && is_backlight_on) || (!enable &&
!is_backlight_on)) {
--
2.42.0
