Acked-by: Anitha Chrisanthus <anitha.chrisant...@intel.com>
> -----Original Message-----
> From: Jim Cromie <jim.cro...@gmail.com>
> Sent: Wednesday, September 6, 2023 12:02 PM
> To: linux-ker...@vger.kernel.org; dri-de...@lists.freedesktop.org; amd-
> g...@lists.freedesktop.org; intel-gvt-...@lists.freedesktop.org; intel-
> g...@lists.freedesktop.org
> Cc: daniel.vet...@ffwll.ch; dan...@ffwll.ch; Nikula, Jani
> <jani.nik...@intel.com>; ville.syrj...@linux.intel.com;
> seanp...@chromium.org; robdcl...@gmail.com; Jim Cromie
> <jim.cro...@gmail.com>; Chrisanthus, Anitha
> <anitha.chrisant...@intel.com>; Edmund Dea <edmund.j....@intel.com>;
> David Airlie <airl...@gmail.com>
> Subject: [PATCH v3 2/5] drm/kmb: add trailing newlines to drm_dbg msgs
>
> By at least strong convention, a print-buffer's trailing newline says
> "message complete, send it". The exception (no TNL, followed by a call
> to pr_cont) proves the general rule.
>
> Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG,
> 1288 drm_dbg. Clean up the remainders, in maintainer sized chunks.
>
> No functional changes.
>
> Signed-off-by: Jim Cromie <jim.cro...@gmail.com>
> ---
> drivers/gpu/drm/kmb/kmb_crtc.c | 10 +++++-----
> drivers/gpu/drm/kmb/kmb_plane.c | 6 +++---
> 2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c
> b/drivers/gpu/drm/kmb/kmb_crtc.c
> index 647872f65bff..a58baf25322d 100644
> --- a/drivers/gpu/drm/kmb/kmb_crtc.c
> +++ b/drivers/gpu/drm/kmb/kmb_crtc.c
> @@ -94,7 +94,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc,
> vm.hback_porch = 0;
> vm.hsync_len = 28;
>
> - drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d
> h-active=%d h-bp=%d h-fp=%d hsync-l=%d",
> + drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d
> h-active=%d h-bp=%d h-fp=%d hsync-l=%d\n",
> __func__, __LINE__,
> m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch,
> vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
> @@ -194,24 +194,24 @@ static enum drm_mode_status
> int vfp = mode->vsync_start - mode->vdisplay;
>
> if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) {
> - drm_dbg(dev, "height = %d less than %d",
> + drm_dbg(dev, "height = %d less than %d\n",
> mode->vdisplay, KMB_CRTC_MAX_HEIGHT);
> return MODE_BAD_VVALUE;
> }
> if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) {
> - drm_dbg(dev, "width = %d less than %d",
> + drm_dbg(dev, "width = %d less than %d\n",
> mode->hdisplay, KMB_CRTC_MAX_WIDTH);
> return MODE_BAD_HVALUE;
> }
> refresh = drm_mode_vrefresh(mode);
> if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) {
> - drm_dbg(dev, "refresh = %d less than %d or greater than %d",
> + drm_dbg(dev, "refresh = %d less than %d or greater than
> %d\n",
> refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH);
> return MODE_BAD;
> }
>
> if (vfp < KMB_CRTC_MIN_VFP) {
> - drm_dbg(dev, "vfp = %d less than %d", vfp,
> KMB_CRTC_MIN_VFP);
> + drm_dbg(dev, "vfp = %d less than %d\n", vfp,
> KMB_CRTC_MIN_VFP);
> return MODE_BAD;
> }
>
> diff --git a/drivers/gpu/drm/kmb/kmb_plane.c
> b/drivers/gpu/drm/kmb/kmb_plane.c
> index 9e0562aa2bcb..308bd1cb50c8 100644
> --- a/drivers/gpu/drm/kmb/kmb_plane.c
> +++ b/drivers/gpu/drm/kmb/kmb_plane.c
> @@ -78,7 +78,7 @@ static unsigned int check_pixel_format(struct drm_plane
> *plane, u32 format)
> * plane configuration is not supported.
> */
> if (init_disp_cfg.format && init_disp_cfg.format != format) {
> - drm_dbg(&kmb->drm, "Cannot change format after initial
> plane configuration");
> + drm_dbg(&kmb->drm, "Cannot change format after initial
> plane configuration\n");
> return -EINVAL;
> }
> for (i = 0; i < plane->format_count; i++) {
> @@ -124,7 +124,7 @@ static int kmb_plane_atomic_check(struct drm_plane
> *plane,
> if ((init_disp_cfg.width && init_disp_cfg.height) &&
> (init_disp_cfg.width != fb->width ||
> init_disp_cfg.height != fb->height)) {
> - drm_dbg(&kmb->drm, "Cannot change plane height or width
> after initial configuration");
> + drm_dbg(&kmb->drm, "Cannot change plane height or width
> after initial configuration\n");
> return -EINVAL;
> }
> can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
> @@ -375,7 +375,7 @@ static void kmb_plane_atomic_update(struct
> drm_plane *plane,
> spin_lock_irq(&kmb->irq_lock);
> if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
> spin_unlock_irq(&kmb->irq_lock);
> - drm_dbg(&kmb->drm, "plane_update:underflow!!!!
> returning");
> + drm_dbg(&kmb->drm, "plane_update:underflow!!!!
> returning\n");
> return;
> }
> spin_unlock_irq(&kmb->irq_lock);
> --
> 2.41.0
