I've been using "Mosaic Terminal" (free download, designed for forth)under XP. Just set "Wait for Echo" ON and "Binary Char Delay" 0.005 (or less). It runs 115200 8N1 without a problem (when your crystal allows such speed, of course). Copy/paste sources. This terminal is the only one I can use with amforth. For FlashForth the Tera Term (FF supports Xon/Xoff) is the one which works fine any speed. Pito
----- PŮVODNÍ ZPRÁVA ----- Od: "Kalus Michael" <[email protected]> Komu: "Everything around amforth" <[email protected]> Předmět: Re: [Amforth-devel] Progress and More Difficulties with Hello Datum: 30.3.2011 - 4:47:21 > Hi. > > > Am 29.03.2011 um 21:33 schrieb Matthias Trute: > .. > > Receiving characters is a completly different > > thing. The characters > > > can come at any time, therefore the code needs > > to deal with the > > > situation relativly fast (at least before the > > next character > > > arrives). > > If you just want to connect a terminal to type in > commands, amforth > is fast enough to handle this situation: Wait for > a key, grab it, put > it in inputbuffer, wait again. > amforths accepts keys till end of line, then > interprets the line. > See: uart-rx-poll.asm > Since you - the user - wait for the ok of amforth > to appear, there is > no overflow. > I use 12Mhz chrystal, 14400 Baud, atmega168, works > fine this way. > > But to download a file you have to make shure your > sending program > will immediatly stop sending if a CR is echoed, > and continues after > OK is encounterd. Terminals usualy can not handle > this situation. > That is why Mathias is using a Phyton script for > downloads. > > I use ZTerm with Mac OSX. In typing mode, it stops > sending when XOFF > character is echoed, and continues after XON. So > my amforth CR sends > xoff to the Terminal too, and the OK is followed > by XON. > (Typing mode: copy&paste forth souce into ZTerm > window, do not use > ZTerms file transfer feature. Setup the ZTerm as > VT100 with line > prompt character ^C ($13 = xoff)). > > There may be about two characters on its way down > to amforth till > terminal finaly stops sending more characters. I > allways insert 4 or > more blanks at the beginning of each line in my > forth sources to > handle this situation. This way interpretation of > a line stays > successful even if some characters are lost in the > handshaking process. > > : hallo ." hallo world" ; > ^^^^ > > Maybe this helps. > Michael > > > ------------------------------------------------------------------------------ > > Enable your software for Intel(R) Active > Management Technology to meet the > growing manageability and security demands of your > customers. Businesses > are taking advantage of Intel(R) vPro (TM) > technology - will your software > be a part of the solution? Download the Intel(R) > Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > Amforth-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/amforth-devel > ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Amforth-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/amforth-devel
