Am 14.09.2011 20:23, schrieb Andrew Holt: > Hi, > > You may, or may not, know that there is a add on for the beagle board > that is Arduino compatible and use the ATmega328. > > I would like to use amforth with this board and was wondering if I am > going to be a pioneer, or if somebody else has already done it, and > can warn be of any pit falls and “traps for the unwary".
The controller itself works fine with amforth. What could cause troubles is the selection of the right usart port. You may check the layout first or simply try-and-change: "The Trainer provides a second RS-232 serial port that interfaces to the ATmega328 processor. Commands can be transmitted back and forth between the BeagleBoard and ATmega328 processor. " Matthias ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
