I did load the *'amforth-6.9\appl\eval-pollin\p644.*'* hex and eep files to check things. It works and I can make new words. But, when I loaded (via realterm, all ok):
- to-name.frt - see.frt see always returns 'not found' on any word I try. > ' see see not found ok > ' reveal see not found ok > ------------------------------ In addition ----------------------- For whatever reason the "sanguino" does not work. See previous for UART setup, I used what was there in the assembly file. I did check all of the hardware and settings you mentioned. The 644 that I am using is the same as above. Same baud rate (preamble.inc). It does not appear to me, on the surface, that there is a difference between this and the p644 (from a hardware/setup perspective), just a USART. I have been busier than usual, but will work on things this weekend, dig into the template file and start from scratch. Regards & thanks. _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
