On Sat, 9 Aug 2025 13:57:33 +0200 "J. Barth" <jpunktba...@gmail.com> wrote:
> Hi, my name is Jochen, > I've tried to upload ports-standard.frt to my (arduino) uno to access > the adc. > > Did use amforth-6.9 with uno.hex and uno.eep.hex (manually, done > before reading the manual). > > (Had to add -I /home/user_xyz/.../amforth-6.9/common/lib , without it > did not find some #require files) > > see below: > > ./amforth-shell-upload.sh $(./amforth-dependencies.pl > ports-standard.frt) > + ../amforth-6.9/tools/amforth-shell.py -p /dev/ttyUSB0 -I > /home/jb/forth/amforth-6.9/common/lib > ../amforth-6.9/appl/arduino/blocks/ports-standard.frt > |I=appl_defs: 0 loaded > |I=getting filenames on the host > |I= Reading . > |I= Reading /home/jb/forth/amforth-6.9/common/lib > |I=using ../amforth-6.9/appl/arduino/blocks/ports-standard.frt > verbatim **** /home/jb/forth/my-amforth > |I=getting MCU name.. > |I=successfully loaded register definitions for atmega328p > |I=getting filenames on the host > |I= Reading /home/jb/forth/amforth-6.9/avr8/devices/atmega328p > |I= Reading /home/jb/forth/amforth-6.9/avr8/lib > |I= Reading . > |I= Reading /home/jb/forth/amforth-6.9/common/lib > |F=../amforth-6.9/appl/arduino/blocks/ports-standard.frt > |C| 1|\ > |C| 2|\ port definitions for Atmegas as found on the Arduino > Standard |C| 3|\ Atmega168, Atmega328p > |C| 4|\ > |S| 5|decimal > |W| 6| > |S| 7|PORTD 0 portpin: digital.0 > |S| 8|PORTD 1 portpin: digital.1 > |S| 9|PORTD 2 portpin: digital.2 > |S| 10|PORTD 3 portpin: digital.3 > |S| 11|PORTD 4 portpin: digital.4 > |S| 12|PORTD 5 portpin: digital.5 > |S| 13|PORTD 6 portpin: digital.6 > |S| 14|PORTD 7 portpin: digital.7 > |W| 15| > |S| 16|PORTB 0 portpin: digital.8 > |S| 17|PORTB 1 portpin: digital.9 > |S| 18|PORTB 2 portpin: digital.10 > |S| 19|PORTB 3 portpin: digital.11 > |S| 20|PORTB 4 portpin: digital.12 > |S| 21|PORTB 5 portpin: digital.13 > |W| 22| > |S| 23|PORTC 0 portpin: digital.14 > |S| 24|PORTC 1 portpin: digital.15 > |S| 25|PORTC 2 portpin: digital.16 > |S| 26|PORTC 3 portpin: digital.17 > |S| 27|PORTC 4 portpin: digital.18 > |S| 28|PORTC 5 portpin: digital.19 > |W| 29| > |C| 30|\ some digital ports have an alternative use > |C| 31|\ synonym is available since amforth 5.0 > |S| 32|synonym SPI:SS digital.10 > |E= ?? -13 7 > **** /home/jb/forth/amforth-6.9/appl/arduino/blocks > > Kind regards, Jochen > > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel > > Have a look at: https://amforth.sourceforge.net/faq.html#what-means https://forth-standard.org/standard/tools/SYNONYM Error -13 means "Word not found". You need to load: ./common/lib/forth2012/tools/synonym.frt You can faultfind this sort of thing by typing the following: " ' synonym drop" An error means synonym isn't found. The above snippet avoids executing synonym should it actually be present. Hope this helps. -- Regards, Martin Nicholas. E-mail: reply-2...@mgn.org.uk (Address will be valid throughout 2025). _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
