I believe most receive e-mail and therefore attachments.  I suggest putting 
things in Files that are not "permanent" and send attachments to the few that 
for some reason don't want to receive e-mail.

Bill
  ----- Original Message ----- 
  From: Ton Sieverding 
  To: [email protected] 
  Sent: Thursday, June 21, 2007 2:36 PM
  Subject: Re: [amibroker] Re: Need help with formula, please...


  Yes, thanks. Correct. But it's a hell of a lot more work then just attaching 
a file in an email. But I'll try ...

  Ton.
    ----- Original Message ----- 
    From: dingo 
    To: [email protected] 
    Sent: Thursday, June 21, 2007 4:57 PM
    Subject: RE: [amibroker] Re: Need help with formula, please...



    Ton, attachments will not work with the yahoo email group. you have to go 
to the site via your browser and upload the file the group via the files 
section (see left side of page).

    d



--------------------------------------------------------------------------
      From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of 
Ton Sieverding
      Sent: Thursday, June 21, 2007 5:19 AM
      To: [email protected]
      Subject: Re: [amibroker] Re: Need help with formula, please...


      I think the misunderstanding is in the pudding Ray. With MAHULL there is 
no continuation issue. MAHULL gives you a more ore less centered MA with a more 
or less correct prediction from N/2 through actual. So just use MAHULL as your 
centered MA and try to cross with a normal MA. Look to my chart. It's doing 
something ... as long as the trend is strong enough to keep you out of the 
'wip' losses ...

      I just do not understand why you are not getting the attached chart. I am 
getting a confirmation from the forum of my email and it has the chart 
attached. So somewhere somehow Murphy ( the other guy ) is involved ...

      Regards, Ton.

        ----- Original Message ----- 
        From: ax_ray2222 
        To: [email protected] 
        Sent: Thursday, June 21, 2007 10:33 AM
        Subject: [amibroker] Re: Need help with formula, please...


        Ton, thank you for that, it is same formula I use and it has same 
        issue: it is not a smooth continuation of the DMA(P,-P/2.
        I guess I have to give up as I can't get an answer from the AB support

        Also the pdf file didn't make it either, any files seems they got 
        deleted if they are not posted (loaded) in the Files folder.

        Thank you for your help,
        Ray

        --- In [email protected], "Ton Sieverding" 
        <[EMAIL PROTECTED]> wrote:
        >
        > OK. Here it is. But this is the 100% same formula you can find in 
        the AB Library. And this
        > time the chart attached as PDF in stead of JPG ...
        > 
        > Hull = WMA( 2*WMA(C,int(Period/2)) - WMA(C,Period),int(sqrt
        (Period)));
        > 
        > Regards, Ton.
        > 
        > 
        > 
        > ----- Original Message ----- 
        > From: ax_ray2222 
        > To: [email protected] 
        > Sent: Thursday, June 21, 2007 12:44 AM
        > Subject: [amibroker] Re: Need help with formula, please...
        > 
        > 
        > 
        > Ton, the chart didn't make it, seems that they are some filters 
        to don't attached it, maybe you upload it in the Files folder. Can 
        you post the entire formula you used for that chart, please? 
        > I'd like to compare it with what I used here and why is not 
        working on some symbols.
        > Thank you, Ray
        > 
        > --- In [email protected], "Ton Sieverding" 
        <ton.sieverding@> wrote:
        > >
        > > Please find enclosed Chart for TEX with Hull(56) and MA(28) ...
        > > 
        > > Regards, Ton.
        > > 
        > > ----- Original Message ----- 
        > > From: ax_ray2222 
        > > To: [email protected] 
        > > Sent: Wednesday, June 20, 2007 2:26 AM
        > > Subject: [amibroker] Re: Need help with formula, please...
        > > 
        > > 
        > > 
        > > Hello, i tried Hull MA for the last 14 days as a continuation 
        MA for the negative displaced MA (DMA(28,-14) but it is not making a 
        smooth transition or connection with the DMA.
        > > Stockfetcher.com and Prophet.net are the only ones I know that 
        they cna display a nice smoothed DMA including the last 14 days, here 
        is a link to see a chart on Prophet.net to understand what I try to 
        achieve in AB:
        > > 
        > > http://www.prophet.net/analyze/sc.jsp?
        symbol=TEX&duration=6m&frequency=0&size=468,700&pricedisplay=&page=sna
        pcharts&log=1&redbars=0&hidevolume=0&hideevents=0&hidestudies=0&studie
        s=EMA=11,,;DMA=28,-14,;&scheme=blugray&controls=advanced
        > > 
        > > Any other ideas will be appreciated
        > > thank you, ray
        > > 
        > > --- In [email protected], "ax_ray2222" ax_ray2222@ 
        wrote:
        > > >
        > > > Rakesh, what is DE? I try to find something in Files section 
        by 
        > > > fctonetti ( I guesses is Fred) but could not find anything 
        related to 
        > > > DMA or the extra window what I questioned.
        > > > I do apreciate if you could pinpoint this out,
        > > > Ray
        > > > 
        > > > --- In [email protected], "Rakesh Sahgal" 
        rakeshsahgal@ 
        > > > wrote:
        > > > >
        > > > > search for code by Fred Tonetti in files section. this is 
        the best
        > > > > implementation of DE I have seen so far.
        > > > > 
        > > > > On 6/19/07, ax_ray2222 ax_ray2222@ wro te:
        > > > > >
        > > > > > Thank you Bill for such a quick reply, I'll try to have a 
        look at
        > > > > > both codes and see if I can make any sense in how to use 
        them, as 
        > > > I
        > > > > > am not very good at programming, and still testing AB to 
        see if it
        > > > > > will suit me....so far the response here on the board is 
        > > > overwelming
        > > > > > and I'd like to thank everyone for their kindness in 
        helping 
        > > > novices
        > > > > > as myself....
        > > > > >
        > > > > > I posted another question regarding a possibility of 
        another 
        > > > window
        > > > > > display in AB under the charts, where to have (as choosen 
        fields) 
        > > > the
        > > > > > data needed for the charted stock as PE, EPS,RS,....etc
        > > > > > Any idea if this is possible?
        > > > > >
        > > > > > regards,
        > > > > > Ray
        > > > > >
        > > > > > --- In [email protected], "wavemechanic" 
        <fimdot@> wrote:
        > > > > > >
        > > > > > > There is some code by acesheet for centered moving 
        averages in 
        > > > the
        > > > > > archives under Hurst/Sigma discussions. You can also find 
        some 
        > > > code
        > > > > > at WealthLab (http://www.wealth-lab.com/cgi-
        > > > > > bin/WealthLab.DLL/editsy stem?id=19072).
        > > > > > >
        > > > > > > Bill
        > > > > > > ----- Original Message -----
        > > > > > > From: Ton Sieverding
        > > > > > > To: [email protected]
        > > > > > > Sent: Tuesday, June 19, 2007 7:47 AM
        > > > > > > Subject: Re: [amibroker] Re: Need help with formula, 
        please...
        > > > > > >
        > > > > > >
        > > > > > > So am I, Ray. As far as I understand, what the form ula 
        DMA
        > > > (28,-
        > > > > > 14) does is the combination of shifting back in time ( -
        14) the MA
        > > > > > (28) and extrapolating the unknown part from the center 
        of the
        > > > > > average ( -14 ) thru actual. The first part is a simple 
        Ref( -
        > > > 14 ).
        > > > > > For the last part see Hull's Moving Average. Should be in 
        the AB
        > > > > > library. It's one way to do that. Getting the bars 
        between the 
        > > > center
        > > > > > and today. Although there are many other possibilities 
        and all are
        > > > > > trying to predict the same future. Also see GP's answer 
        to your
        > > > > > question ...
        > > > > > >
        > > > > > > Regards, Ton.
        > > > > > >
        > > > > > >
        > > > > > > ----- Original Message -----
        > > > > > > From: ax_ray2222
        > > > > > > To: [email protected]
        > > > > > > Sent: Tuesday, June 19, 2007 12:00 PM
        > > > > > > Subject: [amibroker] Re: Need help with formula, 
        please...
        > > > > > >
        > > > > > >
        > > > > > > Ton, I am way beyond entry level in AB and in general in
        > > > > > programming,
        > > > > > > so if you are so kind, please help and display the 
        formula 
        > > > you
        > > > > > refer
        > > > > > > to, cause I don't quite follow.....sorry about that...
        > > > > > > thank you, Ray
        > > > > > >
        > > > > > > --- In [email protected], "Ton Sieverdi ng"
        > > > > > > <ton.sieverding@> wrote:
        > > > > > > >
        > > > > > > > Hurst. Centered moving averages ...
        > > > > > > >
        > > > > > > > Regards, Ton.
        > > > > > > >
        > > > > > > > ----- Original Message -----> > > > > > From: 
        gp_sydney
        > > > > > > > To: [email protected]
        > > > > > > > Sent: Tuesday, June 19, 2007 11:02 AM
        > > > > > > > Subject: [amibroker] Re: Need help with formula, 
        please...
        > > > > > > >
        > > > > > > >
        > > > > > > > Sorry, I don't understand what you're asking. I 
        haven't 
        > > > used
        > > > > > > > stockfetcher. What does DMA(28,-14) mean?
        > > > > > > >
        > > > > > > > You can just use the Cross function to check for 
        > > > crossovers.
        > > > > > > >
        > > > > > > > GP
        > > > > > > >
        > > > > > > > --- In [email protected], "ax_ray2222" 
        > > > <ax_ray2222@>
        > > > > > > wrote:
        > > > > > > > >
        > > > > > > > > GP, thank you for the help, I want to make a 
        > > > continuation
        > > > > > of
        > > > > > > the
        > > > > > > > > Displaced MA(28,-14) and with your help it will do 
        this 
        > > > for
        > > > > > the
        > > > > > > last 14
        > > > > > > > > days but it seems that it is verticaly displaced. 
        Is any
        > > > > > way we
        > > > > > > can
        > > > > > > > > make this to plot in the continuation of the DMA
        (28,-
        > > > 14).
        > > > > > I'll
        > > > > > > put here
        > > > > > > > > the entire code I have at the moment, and if you 
        used
        > > > > > > stockfetcher.com
        > > > > > > > > you can see the DMA(28,-14) there:
        > > > > > > > >
        > > > > > > > > _SECTIO N_BEGIN("DispMA");
        > > > > > > > > P = ParamField("Field");
        > > > > > > > > Type = ParamList("Type", "Simple,Exponential,Double
        > > > > > > Exponential,Tripple
        > > > > > > > > Exponential,Wilders,Weighted");
        > > > > > > > > Periods = Param("Periods", 30, 2, 100 );
        > > > > > > > > Displacement = Param("Displacement", 15, -50, 50 );
        > > > > > > > > m = 0;
        > > > > > > > >
        > > > > > > > > if( Type == "Simple" ) m = MA( P,
        > > > > > > > > Periods );
        > > > > > > > > if( Type == "Exponential" ) m = EMA( P, Periods );
        > > > > > > > > if( Type == "Double Exponential" ) m = DEMA( P, 
        > > > Periods );
        > > > > > > > > if( Type == "Tripple Exponential" ) m = TEMA( P, 
        > > > Periods );
        > > > > > > > > if( Type == "Wilders" ) m = Wilders( P,
        > > > > > > > > Periods );
        > > > > > > > > if( Type == "Weighted" ) m = WMA( P,
        > > > > > > > > Periods );
        > > > > > > > >
        > > > > > > > > Plot( m, _DEFAULT_NAME(), ParamColor("Color", 
        > > > ColorCycle),
        > > > > > > ParamStyle
        > > > > > > > > ("Style"), 0, 0, Displacement );
        > > > > > > > > bi = BarIndex();
        > > > > > > > > s5 = IIf(bi-bi[0] >= BarCount-14, MA(Close, 14), 
        Null);
        > > > > > > > > Plot( s5,_DEFAULT_NAME(), ParamColor("Color", 
        > > > ColorCycle),
        > > > > > > ParamStyle
        > > > > > > > > ("Style") );
        > > > > > > > > _SECTION_END();
        > > > > > > > >
        > > > > > > > > I'd like to be able to scan for the crossovers of 
        the 
        > > > DMA
        > > > > > with
        > > > > & gt; > an EMA
        > > > > > > > > (9) for example, and thst will happend only during 
        the 
        > > > last
        > > > > > 14
        > > > > > > days, so
        > > > > > > > > it will be actually a crossover of the s5 with the 
        EMA
        > > > (9) I
        > > > > > > guess.
        > > > > > > > > Do you any idea on this?
        > > > > > > > >
        > > > > > > > > thanks a lot, Ray
        > > > > > > > >
        > > > > > > > > --- In [email protected] , "gp_sydney"
        > > > > > <gp.investment@>
        > > > > > > wrote:
        > > > > > > > > >
        > > > > > > > > > > Actually, I just noticed there's a new function 
        > > > called
        > > > > > > BarIndex()
        > > > > > > > > >
        > > > > > > > > > Sorry, just realised this is not a new function 
        (got
        > > > > > confused
        > > > > > > by the
        > > > > > > > > > red star in the help) and that according to the 
        help, 
        > > > it
        > > > > > may
        > > > > > > not be
        > > > > > > > > > accurate if QuickAFL is on. So if using that, I 
        think 
        > > > you
        > > > > > > might need:
        > > > > > > > > >
        > > > > > > > > > bi = BarIndex();
        > > > > > > > > > s5 = IIf(bi-bi[0] >= BarCount-14, MA(Close, 5), 
        Null);
        > > > > > > > > >
        > > > > > > > > > GP
        > > > > > > > > >
        > > > > > > > >
        > > > > > > >
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > >
        > > > > > > ---- ---------------------------------------------------
        ---------
        > > > ----
        > > > > > ----------
        > > > > > >
        > > > > > >
        > > > > > > No virus found in this incoming message.
        > > > > > > Checked by AVG Free Edition.
        > > > > > > Version: 7.5.472 / Virus Database: 269.9.0/853 - 
        Release Date:
        > > > > > 6/18/2007 3:02 PM
        > > > > > >
        > > > > >
        > > > > >
        > > > > >
        > > > > >
        > > > > > Please note that this group is for discussion between 
        users only.
        > > > > >
        > > > > > To get support from AmiBroker please send an e-mail 
        directly to
        > > > > > SUPPORT {at} amibroker.com
        > > > > >
        > > > > > For NEW RELEASE ANNOUNCEMENTS and other news always check 
        DEVLOG:
        > > > > > http://www.amibroker.com/devlog/
        > > > > >
        > > > > > For other support material please check also:
        > > > > > http://www.amibroker.com/support.html
        > > > > >
        > > > > > Yahoo! Groups Links
        > > > > >
        > > > > >
        > > > > >
        > > > > >
        > > > >
        > > >
        > >
        >




   


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition. 
  Version: 7.5.472 / Virus Database: 269.9.1/857 - Release Date: 6/20/2007 2:18 
PM

Reply via email to