Thanks Steve and TJ.

 

Yes, I got the idea.

 

As far as 2. Is concerned:

I use NO swap file on my HDD at all. I have 4GB of DRAM on
my computer, which is the maximum size of memory that WinXP
32bit can handle.

 

This is an conclusion from my observations of AB behavior. 

i.e. if I reduce the Realtime Chart Refresh time too much I
will see on Process Explorer (see my prior post) that CPU
utilization is pegged at 50%, and the system stops
responding (unfortunately undoing such a mistake is VERY
time consuming).

 

A similar example is if I try to change a symbol of a chart
and a set of linked charts use range bars that are
inappropriate for the new symbol (i.e. 1.0R which is right
for ER2 and the new symbol is YM (where 10R is the
equivalent) I can go and have lunch before I get a chance to
correct that error. (the fact that I need to use intraday
tick database with 1E6 bars to load does not help here)

 

Joseph Biran
____________________________________________

 

From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Dugas
Sent: Friday, May 23, 2008 12:21 PM
To: [email protected]
Subject: Re: [amibroker] Quad-core test results

 

Hi Joseph - looks like TJ has answered your questions and
perhaps I touched on the answers in my other e-mails. Let me
know if you still have a question!

 

Steve

----- Original Message ----- 

From: Tomasz Janeczko <mailto:[EMAIL PROTECTED]>  

To: [email protected] 

Sent: Friday, May 23, 2008 5:20 AM

Subject: Re: [amibroker] Quad-core test results

 

1. FWIW: You can run as many instances as you wish, even
100. As long as you don't update anything it will be just
fine.

But if you start saving any data the "last" write counts.

 

2. Machine should never grind to a halt with 50% CPU
utilisation on dual core. If it does it means that it is
SWAPPING excessively (then system locks the machine).

Excessive swapping usually means that your config is not
correct.


Best regards,
Tomasz Janeczko
amibroker.com

----- Original Message ----- 

From: J. Biran <mailto:[EMAIL PROTECTED]>  

To: [email protected] 

Sent: Friday, May 23, 2008 10:13 AM

Subject: RE: [amibroker] Quad-core test results

 

I am a bit confused: 

 

1.

You were able to run multiple instances of AB all using same
database on one machine? I thought that is not possible.

 

2.

25% CPU utilization on a quad core CPU means 1 core is fully
occupied etc. i.e. on my dual core AMD CPU AB never consumes
more than 50%. If utilization is stuck at 50% the machine
grinds to a halt.

 

3.

If the application itself cannot utilize multiple cores (I
believe few exist now), the maximum "utilization" you could
get from a quad core CPU should be 25% of the theoretical
total computing power. Am I missing something?



Joseph Biran
____________________________________________

From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Dugas
Sent: Thursday, May 22, 2008 5:50 PM
To: Yahoo - AmiBroker
Subject: [amibroker] Quad-core test results

 

Hi All,

 

I finished setting up the new quad-core machine and ran my
first tests today, so am posting the promised test results.
All I can say is Wow!  Really nice improvements, even better
than I expected to see in my highest hopes. I am happy as a
pig in sh*t !!     8 - )

 

For background, the test was an optimization run on a single
ticker, which is how I will be running all my other tests (
ticker was QID, 468 EOD data bars ). All tests used the same
code with different param settings, all tests had about
46,000 opt steps.

 

To put things in perspective and show why I am so happy, the
original code was about 2,400 lines. The first time I ran
it, on my old backup computer which I was using as a
dedicated optimization machine, it took 7 1/2 hours to run.
So then I copied the code and created a shorter version,
removing everything which wasn't absolutley necessary for
the optimizer, and that reduced the run time to 2 1/2 hours.
Then I ran this short version on my faster primary machine
and that took 1 1/4 hours, which is about what I was
expecting to see on the new machine.

 

So today I started by running just ran one instance on the
quad-core - that took only 30 mins and Task Manager showed
it was using just 25% of the total processing power!  Well
to make a long story short, I kept adding one instance at a
time, all instances ran in 30 mins and each used up an
additional 25% of the CPU power. In the end, I was easily
running 4 simultaneous instances. This pretty much kept the
CPU tached at 100% but all instances ran fine, all finished
in 30 mins and I didn't experience any problems at all. I
was even saving the first ones to spreadsheets while the
final ones were still finishing, wow everything just worked
flawlessly!  So, the quad-core can run 4 seperate opts
simultaneously in 30 mins, which averages out to 7 1/2
minutes per opt, which = 

 

10X improvement over running the short code on the fast
machine...

20X improvement over running the short code on the old
dedicated optimization machine...

60X improvement over running the original code on the old
optimization machine...  Awesome !!!

 

To those who were wondering what is the best machine to get
for running AB, it looks to me like quad is the way to go.
( My machine has an Intel processor, which TJ mentioned
should probably work better than AMD for this stuff )....

 

Steve

_

Reply via email to