For redundancy I use an external eSATA drive that is always switched off, except briefly when used. I manually copy onto it Norton Ghost images (that are created on my normal RAID1 drives) as a second layer of protection. This is not excessive paranoia, I have a friend whose computer power supply failed, and blew up the motherboard and ALL his hard disks! Data recovery services are REALLY expensive, with little guarantee of success.
p.s. Outlook thinks you meant to say culpa below :) Joseph Biran ____________________________________________ -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of dingo Sent: Saturday, July 12, 2008 6:54 AM To: [email protected] Subject: RE: [amibroker] The Perfect (?!) AmiBroker Setup [ was Vista 64...] A cupla things to consider: 1. I have multiple computers as well. a. My main computer is a workstation with 3 monitors 1 very fast hard disk drive (raptor) and its where I do most of my work. All of the monitors have both DVI and VGA connectors. I use the DVI to connect to this workstation. b. Another workstation is used as a Media Center. It has a video card that has both DVI and VGA. I use the right most monitor from a to attach to b via the VGA port. I use a free program "Synergy" to allow me to use my single mouse and keyboard on machine a to work on machine b. I just click the "source" button on the shared monitor to switch from DVI (connected to machine a) to VGA (connected to machine b). Synergy then allows me to move my mouse to the right and voila it shows up on the vga'd monitor and I'm on machine b just as if my mouse, keyboard were attached to it. It's a virtual KVM and uses the LAN that both a and b are on. c. A notebook for travel. I also use Synergy on this machine. It just turn it on and if Need to work on it I just scroll my mouse all the way to the left and it treats the notebook as if it were a 4th monitor and I can now use the same mouse and keyboard on machine a to do anything on the notebook. d. A umpc (Samsung Q1u) in my car. When it's out of the car and I have it my office I use Synergy and just like the notebook I can use my mouse and keyboard to work on it. The screen is small (8") so I usually hook it up via the VGA port on my left most monitor and can use that as the carputer's monitor. When it's in the car I use "LogMeIn" (free) via a wireless connection to view the carputer's desktop on my center monitor and I can do anything I want from my office. 2. As mentioned previously I have a NAS that runs in a raid that has single disk failure protection via its raid setup. I use this to store/backup my files. It's quite small and has 4 500gig drives in it. Even with this device I am still not totally protected, data wise. I don't have a second copy at an alternate physical location and I've read recently that the controller on whatever device(s) you use for storage is a single point of failure that can lead to some big problems especially with raid. What I'm trying pass on to you is a way to use an single set of monitors to control/use multiple computers without using the wheels on your chair and how I've set my system(s) up might be of help to you - especially Synergy. And I also recommend you use some sort of redundant disk set up for data loss protection. HTH d > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of psytek > Sent: Saturday, July 12, 2008 8:47 AM > To: [email protected]; [EMAIL PROTECTED] > Subject: [amibroker] The Perfect (?!) AmiBroker Setup [ was > Vista 64...] > > In my painful search for the optimum AmiBroker setup I > decided that I want: > > 1) a non-destructive procedure for upgrading of OS, > AmiBroker, and other software. This means that the previous > environments remain fully functional until the new software > is proven and fully functional. > 2) Only two computers, one for development and one for trading. > 2) Single multiple monitor display/working center (no more > rolling around in my chair!). > 3) Multi-OS capability, perhaps on separate hard disks. So > that I can test Vista 32/64, XP 32/64/professional, or > whatever comes along without risk and loss of time. > 4) Separate hard disk for stock data and afl; readable by all OSs. > 5) easy cloning to facilitate creating a new setup, first in > partition and later to separate HD. > 6) Backup hard disk in development-system, with secondary > backup on networked trading computer. > > Hard disks have become as cheap as memory and using several > of them reduces media-risk. > > Googling a bit I found Acronis Disk Director Suite > http://www.acronis.com/homecomputing/products/diskdirector/m ul > tibooting.html > I use/respect Acronis and would expect this product to work. > The price ($49) is reasonable so the financial risk is small > and they it is compatible with XP/Vista 64 > bits. > > Anyone using the above mentioned Acronis Multiboot software? > > Anyone see flaws in the above computer setup? > > #### Is it possible to have AmiBroker data on a separate hard > disk and access it from other HDs/OSs? #### > > Herman > > Saturday, July 12, 2008, 7:22:38 AM, you wrote: > > > Yes, all 64 bit Windows variants require 64 bit drivers. If > hardware vendor > > does not supply 64-bit driver you can't use particular > hardware with 64-bit OS. > > > Best regards, > > Tomasz Janeczko > > amibroker.com > > ----- Original Message ----- > > From: "psytek" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Friday, July 11, 2008 11:54 PM > > Subject: [amibroker] [OT] XP Professional vs Vista 64 > > > >> Anyone using 64-bit XP Professional? Does it have the > same limitations wrt drivers? > >> > >> I have to admit I am very disappointed with Vista-64; > seems to have been a waste of money and time. > >> > >> Anyone running the TWS under Vista-64? the TWS cannot find javaw... > >> > >> Any alternatives to improving performance wrt to available memory? > >> > >> Computers can be a real pain ... > >> > >> Comment and advice would be appreciated. > >> > >> Herman > >> > >> > >> ------------------------------------ > >> > >> Please note that this group is for discussion between users only. > >> > >> To get support from AmiBroker please send an e-mail directly to > >> SUPPORT {at} amibroker.com > >> > >> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: > >> http://www.amibroker.com/devlog/ > >> > >> For other support material please check also: > >> http://www.amibroker.com/support.html > >> Yahoo! Groups Links > >> > >> > >> > > > ------------------------------------ > > > Please note that this group is for discussion between users only. > > > To get support from AmiBroker please send an e-mail directly to > > SUPPORT {at} amibroker.com > > > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: > > http://www.amibroker.com/devlog/ > > > For other support material please check also: > > http://www.amibroker.com/support.html > > Yahoo! Groups Links > > > > > > > > -- > Best regards, > psytek > > > ------------------------------------ > > Please note that this group is for discussion between users only. > > To get support from AmiBroker please send an e-mail directly to > SUPPORT {at} amibroker.com > > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: > http://www.amibroker.com/devlog/ > > For other support material please check also: > http://www.amibroker.com/support.html > Yahoo! Groups Links > > > ------------------------------------ Please note that this group is for discussion between users only. To get support from AmiBroker please send an e-mail directly to SUPPORT {at} amibroker.com For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: http://www.amibroker.com/devlog/ For other support material please check also: http://www.amibroker.com/support.html Yahoo! Groups Links
