----- Original Message ----- 
  From: Padhu 
  To: [email protected] 
  Sent: Monday, April 06, 2009 8:42 PM
  Subject: Re: [amibroker] Re: erratic eSignal backfill- Did anyone get this 
working?


  I see same issues with AB 5.2 with esignal plugin just freezing during AA RT 
scan...Number of symbols in watchlist is 230 and esignal max symbols is 
200...BUT AB i think internally handles
  how many symbols are fetched at one time during backfill....still it 
hangs...only way is to close and restart AB untill next time...


  If anyone has found a fix , pls let me know. I am also looking to prune the 
symbols down to 175 to see if the problem goes away.
    ----- Original Message ----- 
    From: Herman 
    To: brian_z111 
    Sent: Friday, December 12, 2008 8:16 AM
    Subject: Re: [amibroker] Re: erratic eSignal backfill



    Thanks Brian, for testing.




    I am confused by it but not too worried. I backfill my eSignal DB of 2000+ 
symbols (at 90000 bars each about a 2.5 GByte DB) about once a week. I never 
timed it but it may take from 30-60 minutes. I can live with this once-a-week 
problem :-) This is my development DB. I don't need the eSignal DB for trading, 
IB is OK for that. 




    I never had a warning from eSignal regarding exceeding my limit. This only 
happens during RT scanning.




    herman




    Friday, December 12, 2008, 8:01:16 AM, you wrote:




    > Herman,




    > I'm still thinking about this one ... it would be nice to know the 

    > cause before trying to work around it.




    > I did two tests today:




    > - 600 symbols (S&P500 plus a few) ... 3000 * 1 min bars == 6 days == 

    > 93kb per bar ... downloaded all OK .... eS DataManager popped up a 

    > warning at approx 30/60/90% of download == every 200 symbols ... I 

    > clicked OK and the download sailed on .... it would have kept going 

    > even if I hadn't acknowledged the popup.




    > - 500 symbols (S&P) ... 100,000 * 1 min bars == 208 days == 3125KB 

    > per bar == way over the max possible bakfill (approx 6 months for 1 

    > min bars) ... download locked up after only 4% == approx 20 

    > symbols ... this is way below the cumulative byte for 200 symbols * 

    > backfill limit .... no warning about exceeding symbol limit.




    > I am not sure about what the cause is ... eS fault, AB plugin fault 

    > OR throttling by eS OR something else.







    > brian_z




    > --- In [email protected], "brian_z111" <brian_z...@...> wrote:




    >> I use eS - I am not a heavy user or particularly knowledgeable.




    >> I have also had this occur.




    >> I concluded it was because I was exceeding my symbol limit.... I 

    > was a 

    >> bit surprised about this.




    >> eS allow unlimited symbols, theoretically, but only x number at a 

    > time 

    >> (I have the base 200).




    >> I expected to be able to backfill (exploration) with an unlimited 

    > no. 

    >> of symbopls because it is not using them simultaneously (streaming) 

    > as 

    >> per the quote window ..... the AB manual says that the AB plugin 

    >> rotates a symbol out of the list as it is filled and enters the 

    > next 

    >> one .... logically I assume the plugin can present the request to 

    > eS 

    >> servers one symbol at a time so why should it lock up on excess 

    > symbols?




    >> Anyway, it does.




    >> I didn't reach a conclusion whether the AB plugin wasn't doing what 

    > the 

    >> manual said it would or if I was misunderstanding something.




    >> I think eS is cutting off the download.




    >> The only solution I found was to batch the download via watchlists 

    > (as 

    >> per D's suggestion) ... I do manually turn off the plugin after 

    > each 

    >> batch ... not sure if I need to .... instinct told me to do that 

    > and I 

    >> didn't push it because of the effort required.




    >> Perhaps you could check with AB support if the symbol rotation 

    > feature 

    >> was/is/should be working OR has that been discontinued for some 

    > reason.




    >> I believe it would work if you find a way to auto start AB and 

    > batch 

    >> explore etc




    >> brian_z













    > ------------------------------------




    > **** IMPORTANT ****

    > This group is for the discussion between users only.

    > This is *NOT* technical support channel.




    > *********************

    > TO GET TECHNICAL SUPPORT from AmiBroker please send an e-mail directly to

    > SUPPORT {at} amibroker.com

    > *********************




    > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:

    > http://www.amibroker.com/devlog/




    > For other support material please check also:

    > http://www.amibroker.com/support.html




    > *********************************

    > Yahoo! Groups Links




    >     http://groups.yahoo.com/group/amibroker/




    >     Individual Email | Traditional




    >     http://groups.yahoo.com/group/amibroker/join

    >     (Yahoo! ID required)




    >     mailto:[email protected] 

    >     mailto:[email protected]




    >     [email protected]




    >     http://docs.yahoo.com/info/terms/








     

Reply via email to