Ozzy,

You can probably do what you want from within custom backtester code. You can 
track single bar values bar by bar, or construct a running tally bar by bar, 
storing the results in a composite symbol.

http://www.amibroker.com/kb/2008/05/19/historical-portfolio-backtest-metrics/

Paolo recently posted something similar here:
http://finance.groups.yahoo.com/group/amibroker/message/137124

Mike

--- In [email protected], "ozzyapeman" <zoopf...@...> wrote:
>
> Hello,
> 
> Hoping someone can help with debugging this trading system code.
> I'vebeen building BarCount loops for the better part of 9 months now,
> andthought I had the hang of it. Yet this simple problem seems to have
> thebetter of me!
> 
> First, a simple test trading code that does work. The followingcode
> tests some entry and exit ranges, and takes a position when agiven range
> is true. I optimize over the various ranges, as well asLong/Short to see
> what works best. I am testing Forex, and left out thebacktester settings
> for simplicity here.
> 
> If you optimize or backtest this code, over any given month, you will
> see output as expected:
> 
> //-----------------------------------------------------------------
> //      Variables for Optimization
> //-----------------------------------------------------------------
> 
> 
> LongOrShort = Optimize("LongOrShort", 1, 1, 2, 1);
> EntryNum    = Optimize("EntryNum",    1, 1, 3, 1);
> ExitNum     = Optimize("ExitNum",     1, 1, 3, 1);
> 
> 
> //-----------------------------------------------------------------
> //      Set up Range Tests for Entries and Exits
> //-----------------------------------------------------------------
> 
> myMA1       = MA(Close, 7);
> 
> Entry1      = Close >= myMA1 + 0.0001  && Close < myMA1 + 0.0003;
> Entry2      = Close >= myMA1 + 0.0003  && Close < myMA1 + 0.0005;
> Entry3      = Close >= myMA1 + 0.0005;
> 
> Exit1       = Close >= myMA1 + 0.0002  && Close < myMA1 + 0.0006;
> Exit2       = Close >= myMA1 + 0.0006  && Close < myMA1 + 0.0010;
> Exit3       = Close >= myMA1 + 0.0010;
> 
> 
> Entry       = VarGet("Entry" + EntryNum);
> Exit        = VarGet("Exit"  + ExitNum );
> 
> 
> //-----------------------------------------------------------------
> //      Trading System
> //-----------------------------------------------------------------
> 
> Buy  = Short = 0;
> 
>     if(LongOrShort == 1)
> 
>           Buy   = Entry;
> 
>     else
> 
>         Short = Entry;
> 
> 
> Cover = Sell = Exit;
> 
> So now all I want to do is run the exact same code as above, but with
> aBarCount loop, so that I can calculate some basic statistics for
> eachtrade over the optimization parameters. For example, I might want
> tofind out the average profit for trades, the frequency of which
> rangeswere used for entries, etc. While these trivial examples may
> beavailable in the AB optimization report, my real-world use involves
> allsorts of different stats that are not available.
> 
> After I calculate the stats, I want to dump them to a log file. Pretty
> simple in theory.
> 
> But the following code suffers from these problems:
> 
> 
>     1. If you run an optimization, all results are zero, instead of being
> identical to the above code.
>     2. If you run a backtest, no trades are ever taken, instead of
> behaving identical to the above code
>     3. The log file contains repeated rows. It should only contain one
> row per optimization sweep
>     4. The ProfitAvg stat is not calculated correctly. Entries are all
> -10 Billion or so (!)
> 
> Can anyone spot why this is not working? I get no errors, and
> tracesindicate that my loops are being correctly processed. Any input
> muchappreciated!
> 
> 
> //-----------------------------------------------------------------
> //      Variables for Optimization
> //-----------------------------------------------------------------
> 
> 
> LongOrShort = Optimize("LongOrShort", 1, 1, 2, 1);
> EntryNum    = Optimize("EntryNum",    1, 1, 3, 1);
> ExitNum     = Optimize("ExitNum",     1, 1, 3, 1);
> 
> 
> //-----------------------------------------------------------------
> //      Set up Range Tests for Entries and Exits
> //-----------------------------------------------------------------
> 
> myMA1       = MA(Close, 7);
> 
> Entry1      = Close >= myMA1 + 0.0001  && Close < myMA1 + 0.0003;
> Entry2      = Close >= myMA1 + 0.0003  && Close < myMA1 + 0.0005;
> Entry3      = Close >= myMA1 + 0.0005;
> 
> Exit1       = Close >= myMA1 + 0.0002  && Close < myMA1 + 0.0006;
> Exit2       = Close >= myMA1 + 0.0006  && Close < myMA1 + 0.0010;
> Exit3       = Close >= myMA1 + 0.0010;
> 
> 
> Entry       = VarGet("Entry" + EntryNum);
> Exit        = VarGet("Exit"  + ExitNum );
> 
> 
> //-----------------------------------------------------------------
> //      Trading System with BarCount Loop
> //-----------------------------------------------------------------
> 
> 
> FileName     = "F:\\Stats Log File.csv";
> 
> wasLong      = wasShort       = BuySignal    =
> ShortSignal  = SellSignal     = CoverSignal  =
> SoldCount    = CoverCount     = EntryFreq    = 0;
> 
> ValueAtBuy   = ValueAtShort   = ProfitLevel  =
> ProfitSum    = ProfitAvg      = Null;
> 
> LongContractCount  = 0;
> ShortContractCount = 0;
> 
> 
> for (i = 0; i < BarCount-1; i++)
> {
>    wasLong  =  LongContractCount  > 0;
>    wasShort =  ShortContractCount > 0;
> 
>    // Long Exit
>    if (wasLong && Exit[i])
>    {
>       SellSignal[i] = 1;
>       LongContractCount = 0;
>       SoldCount++;
>       ProfitLevel = SellPrice[i] - ValueAtBuy;
>       ProfitSum  += ProfitLevel;
>     }
> 
>     // Short Exit
>     if (wasShort && Exit[i])
>     {
>       CoverSignal[i] = 1;
>       ShortContractCount = 0;
>       CoverCount++;
>       ProfitLevel = ValueAtShort - SellPrice[i];
>       ProfitSum  += ProfitLevel;
>      }
> 
> 
>    // Long entry
>     if ( Entry[i] && LongOrShort == 1 )
>     {
>        BuySignal[i] = 1;
>        EntryFreq++;
>        LongContractCount = 1;
>        ValueAtBuy = BuyPrice[i];
>      }
> 
>    // Short entry
>     if ( Entry[i] && LongOrShort == 2 )
>     {
>        ShortSignal[i] = 1;
>        EntryFreq++;
>        ShortContractCount = 1;
>        ValueAtShort = ShortPrice[i];
>      }
> }
> 
> Sell  = SellSignal;
> Cover = CoverSignal;
> Buy   = BuySignal;
> Short = ShortSignal;
> 
> 
> //-----------------------------------------------------------------
> //      Calculate Some Basic Stats
> //-----------------------------------------------------------------
> 
> 
> if(LongOrShort == 1)
> 
>     ProfitAvg = ProfitSum/SoldCount;
> 
> else
> 
>     ProfitAvg = ProfitSum/CoverCount;
> 
> 
> 
> //-----------------------------------------------------------------
> //      Create a Text Header Row for the Log File
> //-----------------------------------------------------------------
> 
> SetCustomBacktestProc( "" );
> 
> if ( Status( "ActionEx" ) == actionExOptimizeSetup )
> {
>      _TRACE( "Optimize Begin" );
>      fh = fopen( FileName, "w" );
> 
>      if ( fh )
>      {
>         fputs( "LongOrShort, Entry, Exit, EntryFreq, ProfitAvg\n", fh );
>         fclose( fh );
>      }
> }
> 
> 
> //-----------------------------------------------------------------
> //      Dump the Stats Values to the Log File
> //-----------------------------------------------------------------
> 
> 
> fh = fopen( FileName, "a" );
> 
> if ( fh )
> {
>     fputs( StrFormat( "%.0f,%.0f,%.0f,%.0f,%.5f\n",
>                      LongOrShort, Entry, Exit, EntryFreq, ProfitAvg), fh
> );
>     fclose( fh );
>    }
>


Reply via email to