Hi,
After a quick test, I believe that comparing the SelectedValue of
BarSinceCrossgreen vs. BarSinceCrossred will give you what you want.
Basically, you want to know which occured most recently (i.e. which has
had fewer bars pass since it happened).
One_Houre_Green_Cross = Cross( MACD(), Signal() );
One_Houre_Red_Cross = Cross( Signal(), MACD() );
BarSinceCrossgreen = BarsSince( One_Houre_Green_Cross );
BarSinceCrossred = BarsSince( One_Houre_Red_Cross );
BarSinceCrossUp = StrFormat( " %g ", BarSinceCrossgreen, SelectedValue(
ROC( C, 1 ) ) );
BarSinceCrossDown = StrFormat( " %g ", BarSinceCrossred, SelectedValue(
ROC( C, 1 ) ) );
GfxSelectFont( "Arial", 12, 700 );
GfxSetBkMode( 1 );
pxHeight = Status( "pxchartheight" );
t = pxHeight;
x5 = 101;
if ( SelectedValue( BarSinceCrossGreen ) < SelectedValue(
BarSinceCrossRed ) )
{
offset = 50;
GfxSetTextColor( colorGreen );
GfxTextOut( BarSinceCrossUp, x5, t - offset );
}
else
{
offset = 25;
GfxSetTextColor( colorRed );
GfxTextOut( BarSinceCrossDown, x5, t - offset );
}
GfxSelectFont( "Arial", 9, 700 );
GfxSetTextColor( colorWhite );
Bar = "Bar";
x4 = 78;
GfxTextOut( Bar, x4, t - offset ) ;
Mike
--- In [email protected], "Mohammed" <softnews2...@...> wrote:
>
> Hi Mike,
>
> I try the code you provide here, But I'm not able to add it as part of
my other code.
>
> Can u help please.
>
> Thanks an advince
>
>
> --- In [email protected], "Mohammed" softnews2003@ wrote:
> >
> > Hi Mike,
> >
> > I appreciated your reply. I will try that.
> >
> >
> > Thanks again.
> > Regards
> >
> >
> > --- In [email protected], "Mike" <sfclimbers@> wrote:
> > >
> > > Try something like the following (untested)
> > >
> > > if (LastValue(BarsSinceCrossedGreen) <
LastValue(BarsSinceCrossedRed)) {
> > > // Last cross ever was up
> > > } else {
> > > // Last cross ever was down
> > > }
> > >
> > > Or possibly
> > >
> > > if (SelectedValue(BarsSinceCrossedGreen) <
SelectedValue(BarsSinceCrossedRed)) {
> > > // Last cross up to selection was up
> > > } else {
> > > // Last cross up to selection was down
> > > }
> > >
> > > Mike
> > >
> > > --- In [email protected], "Mohammed" <softnews2003@>
wrote:
> > > >
> > > >
> > > > Hi all,
> > > >
> > > > For the following code I'm using two values to show the number
of bars
> > > > since MACD cross. One value for up and one for down. These
values
> > > > showing both in the chart page, I would like to show only the
last
> > > > values depending to cross if the cross up I need to show the
values for
> > > > up and if it for down cross I need to show the value for down
only.
> > > > Instead of showing both values.
> > > >
> > > > One_Houre_Green_Cross = Cross(MACD(), Signal());
> > > > One_Houre_Red_Cross = Cross(Signal(), MACD());
> > > > BarSinceCrossgreen = BarsSince( One_Houre_Green_Cross);
> > > > BarSinceCrossred = BarsSince( One_Houre_Red_Cross);
> > > > BarSinceCrossUp = StrFormat(" %g ", BarSinceCrossgreen,
SelectedValue(
> > > > ROC( C, 1 ) ) );
> > > > BarSinceCrossDown = StrFormat(" %g ", BarSinceCrossred,
SelectedValue(
> > > > ROC( C, 1 ) ) );
> > > >
> > > > GfxSelectFont( "Arial", 12, 700 );
> > > > GfxSetBkMode( 1 );
> > > > GfxSetTextColor( colorGreen);
> > > > pxHeight = Status( "pxchartheight" );
> > > > t = pxHeight;
> > > > x5 = 101;
> > > >
> > > > GfxTextOut( BarSinceCrossUp, x5, t -50);
> > > > GfxSetTextColor( colorRed);
> > > > GfxTextOut( BarSinceCrossDown, x5, t -25);
> > > > GfxSelectFont( "Arial", 9, 700 );
> > > > GfxSetTextColor( colorBlack);
> > > >
> > > > Bar = "Bar";
> > > > x4 = 78;
> > > >
> > > > GfxTextOut( Bar, x4, t -50) ;
> > > > GfxTextOut( Bar, x4, t -25) ;
> > > >
> > > > Any one can help please.
> > > > Regards
> > > >
> > >
> >
>
