Your description is very ambiguous (at least to me) but nevertheless if the 
"peak" as you describe it had a higher-than/less-than relationship with the 
"close" then at some point they must have crossed over or under. If it proceeds 
to "ascend" or "descend" from that point on, then you are looking for the HHV 
or LLV ending with the point of crossover/under (using the triggers in my last 
response):

Peak = LLV(myArray, BarsSince (BuyTrigger)); 


--- In [email protected], "maustin30062" <martin.aus...@...> wrote:
>
> Thank you for your response. In actuality, I am not looking for a crossover. 
> I am just looking for the last time a value (I used moving average as an 
> example, but the actual array I am using is really a type of peak, so it 
> doesn't change continuously). I am actually looking for the last value of 
> this peak when it was less than the current bar's close (not when the close 
> of a bar crossed the peak).
> 
> Marty
> 
> --- In [email protected], "corvidsystems" <corvidsys@> wrote:
> >
> > In essence, you are looking for a CrossOver, CrossUnder (for example):
> > 
> > ---------------------
> > MyMA=MA(C,30);
> > 
> > BuyTrigger = Cross(Ref(C,-1),Ref(MyMA,-1));//Previous bar's close went 
> > above MyMA
> > ShortTrigger = Cross(Ref(MyMA,-1),Ref(C,-1));//Previous bar's close went 
> > under MyMA
> > 
> > Buy=BuyTrigger;
> > BuyPrice=Min(Ref(C,-1), Ref(O,0));
> > 
> > Short=ShortTrigger; 
> > ShortPrice=Max(Ref(C,-1), Ref(O,0));
> > 
> > ---------------------
> > 
> > Hope that helps
> > 
> > --- In [email protected], "maustin30062" <Martin.austin@> wrote:
> > >
> > > Can anybody help me with this?
> > > 
> > > I would like to look back to see when the the moving average of close is 
> > > less than the current bar's value of close. That is, I am looking for the 
> > > last value of MA(C,30) that is less than the value of C at a given bar. 
> > > In essence, I want to hold the value of Close constant for each bar and 
> > > compare it to the array MA(C,30). Using the following:
> > > 
> > > x = valuewhen(C < MA(C,30),MA(C,30));
> > > 
> > > gives a value of the moving average where the value of C at that bar was 
> > > less than the moving average (i.e. it compares C and the moving average 
> > > at the same bar). I can use LastValue(C) to get the most current value, 
> > > but of course, can't backtest it.
> > >
> >
>


Reply via email to